1SP0635x2xx-FZ1200R33KF2C 1SP0635x2xx-FZ1200R33KF2C Preliminary Data Sheet Compact, high-performance, plug-and-play single-channel IGBT driver based on SCALE-2 technology for individual and parallel-connected modules in 2-level, 3-level and multilevel converter topologies Abstract The SCALE-2 plug-and-play driver 1SP0635x2xx-FZ1200R33KF2C is a compact single-channel intelligent gate driver designed for Infineons IGBTs FZ1200R33KF2C. The master driver 1SP0635x2Mx-FZ1200R33KF2C features a fiber-optic interface with a built-in isolated DC/DC power supply. It can be used as stand-alone driver or in conjunction with up to three 1SP0635D2Sx-FZ1200R33KF2C slaves to drive up to four parallel- connected IGBT modules of type FZ1200R33KF2C. For drivers adapted to other types of high-power and high-voltage IGBT modules, refer to: www.IGBT-Driver.com/go/plug-and-play Features Applications Plug-and-play solution Traction Allows parallel connection of IGBT modules Railroad power supplies For 2-level, 3-level and multilevel topologies Light rail vehicles Built-in isolated DC/DC power supply (master) HVDC Fiber-optic links (master) Flexible AC transmission systems (FACTS) Built-in interface to 1SP0635D2Sx (slave) Medium-voltage converters Duty cycle 0...100% Industrial drives 2 Dynamic Advanced Active Clamping DA C Wind-power converters Dynamic IGBT short-circuit protection Medical applications Monitoring of supply voltage Research Monitoring of gate voltage And many others Extremely reliable long service life Shortens application development time Suitable for FZ1200R33KF2C IGBT-Driver.com Page 1 1SP0635x2xx-FZ1200R33KF2C Preliminary Data Sheet Safety Notice The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high- voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation This data sheet contains only product-specific data. For a detailed description, must-read application notes and common data that apply to the whole series, please refer to the Description & Application Manual for 1SP0635 SCALE-2 IGBT Drivers on www.IGBT-Driver.com/go/1SP0635. When applying SCALE-2 plug-and-play drivers, please note that these drivers are specifically adapted to a particular type of IGBT module. Therefore, the type designation of SCALE-2 plug-and-play drivers also includes the type designation of the corresponding IGBT module. These drivers are not valid for IGBT modules other than those specified. Incorrect use may result in failure. Mechanical Dimensions Dimensions: See the relevant Description and Application Manual Mounting principle: Connected to IGBT module with screws Fiber-Optic Interfaces (1SP0635x2Mx) Interface Remarks Part type Drive signal input 1SP0635V, fiber-optic receiver (Notes 1, 2) HFBR-2522Z Drive signal input 1SP0635S, fiber-optic receiver (Notes 1, 2) HFBR-2412Z Status output 1SP0635V, fiber-optic transmitter (Notes 1, 3) HFBR-1522Z Status output 1SP0635S, fiber-optic transmitter (Notes 1, 3) HFBR-1412Z Electrical Connectors Interface Remarks Part type Power supply connector X1 1SP0635x2Mx, on-board connector (Note 4) 214012 Bus connectors X2 and X3 On-board connectors (Note 5) 214013 Page 2 INTELLIGENT POWER ELECTRONICS