2BB0108T2Ax-06 2BB0108T2Ax-06 Target Data Sheet Base Board for 2SC0108T SCALE-2 driver for 600V IGBT modules or MOSFETs with an electrical interface for 2-level, 3-level and multilevel converter topologies with paralleling capability Abstract The 2BB0108T is a Base Board based on the SCALE-2 driver core 2SC0108T designed to drive 600V IGBT modules like 34mm, 62mm IGBT modules and others. The Base Board features an electrical interface with a built-in DC/DC power supply. The turn-on and turn-off gate resistors of both channels are not assembled in order to provide maximum flexibility. They must be assembled by the user before start of operation. Please refer to Description & Application Manual for 2BB0108T Base Boards for more information. For drivers adapted to various types of high-power and high-voltage IGBT modules, refer to www.IGBT-Driver.com/go/plug-and-play Features Applications Easy start of operation of 2SC0108T 34mm IGBT modules Shortens application development time 62mm IGBT modules Schematics available 17mm dual IGBT modules TM Production data available (Gerber files) EconoPACK+ IGBT modules 20-pin flat cable interface Allows parallel connection of IGBT modules Safe isolation to EN 50178 UL compliant EconoPACK+ is a trademark of Infineon Technologies AG, Munich www.IGBT-Driver.com Page 1 2BB0108T2Ax-06 Target Data Sheet Safety Notice The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high- voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation The data sheet of 2SC0108T (see www.igbt-driver.com/go/2SC0108T) applies. This data sheet contains only information which differs or completes the data contained in the data sheet of driver core 2SC0108T. For a detailed description, must-read application notes and common data that apply to the whole series, please refer to Description & Application Manual for 2SC0108T drivers and Description & Application Manual for 2BB0108T Base Boards on www.IGBT-Driver.com/go/2SC0108T and www.IGBT-Driver.com/go/2BB0108T. The turn-on and turn-off gate resistors on this Base Board are not assembled in order to provide maximum flexibility. Please refer to Description & Application Manual for 2BB0108T Base Boards for more information. Mechanical Dimensions Dimensions: See Description & Application Manual for 2BB0108T Base Boards Mounting principle: Connected to IGBT module over the connectors X2 and X3 Absolute Maximum Ratings Parameter Remarks Min Max Unit Average supply current I Note 1 260 mA CC Output power per gate Ambient temperature <70C (Note 2) 1.2 W Ambient temperature 85C (Note 2) 1 W DC-link voltage Note 3 400 V Recommended Operating Conditions Parameter Remarks Min Typ Max Unit Resistance from TB to GND Blocking time0, ext. value 128 k SO current Fault condition, 3.3V logic 4 mA x www.IGBT-Driver.com Page 2