SCALE-2 2SC0435T2G0-17 2SC0435T2G0-17 Preliminary Datasheet Dual-Channel Low-Cost SCALE-2 IGBT and MOSFET Driver Core Abstract The low-cost SCALE-2 dual-driver core 2SC0435T2G0-17 (Connector pin length of 3.1mm, suitable for PCB thickness of 2mm lead free) combines unrivalled compactness with broad applicability. The driver is designed for universal applications requiring high reliability. The 2SC0435T2G0-17 drives all usual high-power IGBT modules up to 1700V. The embedded paralleling capability allows easy inverter design covering higher power ratings. Multi-level topologies are also supported. The 2SC0435T2G0-17 is the most compact driver core in its power range with a footprint of only 57.2 x 51.6mm and an insertion height of max. 20mm. It allows even the most restricted insertion spaces to be efficiently used. Compared with conventional drivers, the highly integrated SCALE-2 chipset allows about 85% of components to be dispensed with. This advantage is impressively reflected in increased reliability at simultaneously minimized cost. The 2SC0435T2G0-17 combines a complete two-channel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection, advanced active clamping as well as supply voltage monitoring. Each of the two output channels is electrically isolated from the primary side and the other secondary channel. An output current of 35A and 4W drive power is available per channel, making the 2SC0435T2G0-17 an ideal driver platform for universal usage in medium and high-power applications. The driver provides a gate voltage swing of +15V/-10V. The turn-on voltage is regulated to maintain a stable 15V regardless of the output power level. Its outstanding EMC allows safe and reliable operation in even hard industrial applications. Product Highlights Applications Ultra-compact dual-channel driver General purpose drives Highly integrated SCALE-2 chipset Uninterruptible power supplies (UPS) Gate current 35A, 4W output power per channel Solar and wind power converters +15V/-10V gate driving Auxiliary converters for traction Blocking voltages up to 1700V Electro/hybrid drive vehicles Safe isolation to EN 50178 Driving parallel-connected IGBTs Short delay and low jitter Medical (MRT, CT, X-Ray) Interface for 3.3V ... 15V logic level Laser technology Dedicated IGBT and MOSFET mode UL recognition E321757 for UL508C (NMMS2/8) UL recognition E346491 for UL60950-1 (NWGQ2/8) Lead free www.power.com/igbt-driver Page 1 SCALE-2 2SC0435T2G0-17 Preliminary Data Sheet Safety Notice The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high- voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation This data sheet contains only product-specific data. For a detailed description, must-read application notes and important information that apply to this product, please refer to 2SC0435T Description & Application Manual on www.power.com/igbt-driver/go/2SC0435T Absolute Maximum Ratings Parameter Remarks Min Max Unit Supply voltage V VDC to GND 0 16 V DC Supply voltage V VCC to GND 0 16 V CC Logic input and output voltages Primary side, to GND -0.5 VCC+0.5 V SOx current Failure condition, total current 20 mA Gate peak current I Note 1 -35 +35 A out External gate resistance Turn-on and turn-off 0.5 Average supply current I Notes 2, 3 1050 mA DC Output power Ambient temperature <70C (Notes 4, 5) 6 W Ambient temperature 85C (Note 4) 4 W Switching frequency f 100 kHz Test voltage (50Hz/1min.) Primary to secondary (Note 15) 5000 V AC(eff) Secondary to secondary (Note 15) 4000 V AC(eff) dV/dt Rate of change of input to output voltage (Note 11) 75 kV/s Operating voltage Primary/secondary, secondary/secondary 1700 V peak Operating temperature Note 5 -40 +85 C Storage temperature -40 +90 C Recommended Operating Conditions Power Supply Remarks Min Typ Max Unit Supply voltage V VDC to GND, IGBT mode 14.5 15 15.5 V DC Supply voltage V VCC to GND 14.5 15 15.5 V CC www.power.com/igbt-driver Page 2