SCALE-2 2SC0535T2G0-33, 2SC0535T2G0C-33 2SC0535T2G0-33 and 2SC0535T2G0C-33 Datasheet Dual-Channel SCALE-2 IGBT Driver Core for 3300V IGBTs Abstract The SCALE-2 dual-driver core 2SC0535T2G0-33 (Connector pin length of 3.1mm lead free) / 2SC0535T2G0C-33 (Coated version using ELPEGUARD SL 1307 FLZ/2 from Lackwerke Peters) combines unrivalled compactness with broad applicability. The driver is designed for universal applications requiring high reliability. The 2SC0535T2G0(C)-33 drives all usual high-power IGBT modules up to 3300V. Its embedded paralleling capability allows easy inverter design covering higher power ratings. Multi-level topologies involving 1700V IGBTs with higher isolation requirements can also be easily supported by 2SC0535T2G0(C)-33. The 2SC0535T2G0(C)-33 combines a complete two-channel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection, Advanced Active Clamping as well as supply voltage monitoring. Each of the two output channels is electrically isolated from the primary side and from the other secondary channel. An output current of 35A and 5W drive power is available per channel, making the 2SC0535T2G0(C)-33 an ideal driver platform for universal use in medium and high-power applications. The driver provides a gate voltage swing of 15V/-10V. The turn-on voltage is regulated to maintain a stable 15V regardless of the output power level. Its outstanding EMC allows safe and reliable operation even in hard industrial applications. Product Highlights Applications Ultra-compact dual-channel driver Traction Highly integrated SCALE-2 chipset Railroad power supplies Gate current 35A, 5W output power per channel Light rail vehicles 15V/-10V gate driving HVDC Blocking voltages up to 3300V Flexible AC transmission systems (FACTS) Safe isolation to EN 50178 and EN 50124 Medium-voltage converters Short delay and low jitter Wind-power converters Interface for 3.3V...15V logic level Industrial drives UL compliant Medical applications Lead free www.power.com/gate-driver Page 1 SCALE-2 2SC0535T2G0-33, 2SC0535T2G0C-33 Data Sheet Safety Notice The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high- voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation This data sheet contains only product-specific data. For a detailed description, must-read application notes and important information that apply to this product, please refer to 2SC0535T Description & Application Manual on www.power.com/gate-driver/go/2SC0535T. Absolute Maximum Ratings Parameter Remarks Min Max Unit Supply voltage V VDC to GND 0 16 V DC Supply voltage V VCC to GND 0 16 V CC Logic input and output voltages Primary side, to GND -0.5 VCC+0.5 V SOx current Failure condition, total current 20 mA Gate peak current I Note 1 -35 +35 A out External gate resistance Turn-on and turn-off 0.5 Average supply current IDC Notes 2, 3 1250 mA Output power Ambient temperature <70C (Notes 4, 5) 7.5 W Ambient temperature <85C (Note 4) 5 W Switching frequency f 100 kHz Test voltage (50Hz/1min.) Primary to secondary (Note 15) 9100 V AC(eff) Secondary to secondary (Note 15) 6000 V AC(eff) dV/dt Rate of change of input to output voltage (Note 11) 50 kV/s Operating voltage Primary/secondary, secondary/secondary 3300 V peak Operating temperature Note 5 -55 85 C Storage temperature Note 18 -55 50 C Surface temperature Only for 2SC0535T2G0C-33 (Note 19) 125 C www.power.com/gate-driver Page 2