SCALE-2+ 2SC0115T2A0-12, 2SC0115T2A0C-12 2SC0115T2A0-12 and 2SC0115T2A0C-12 Preliminary Data Sheet Dual-channel ultra-compact SCALE-2+ driver core Short Description The SCALE-2+ dual-driver core 2SC0115T2A0-12 / 2SC0115T2A0C-12 (Coated version using ELPEGUARD SL 1307 FLZ/2 from Lackwerke Peters) combines unrivalled compactness with broad applicability. The 2SC0115T2A0(C)-12 dual channel gate-driver core is made for 90kW to 500kW inverters and converters. Leveraging SCALE-2+ integrated circuit and isolated transformer technology for DC/DC power and switching signal transmission, the driver core improves system reliability and performance by eliminating the need for an opto-coupler. The driver cores reinforced electrical isolation targets systems with a working voltage of 900V, which is typical for 1200V IGBT modules and complies with the PD2 and OV II clearance and creepage requirements of IEC 60664-1 and IEC 61800-5-1. The 2SC0115T2A0(C)-12 gate-driver core supports modules up to 1400A and switching frequencies of up to 50kHz. With a footprint of 53.1mm x 31mm and a profile of just 13mm the 2SC0115T2A0(C)-12 gate-driver core is the most compact industrial unit of its type available. Compared with conventional drivers, the highly- integrated SCALE-2+ chipset uses about 85% fewer components than competing products. It includes short- circuit protection by V monitoring and supply-voltage monitoring independently from the primary and CEsat secondary side. The new gate-driver core supports full Advanced Active Clamping (AAC) to control the IGBT voltage overshoot during turn-off. Each of the two output channels is electrically isolated from the primary side and the other secondary channel. An output current of 15A and 1.4W drive power is available per channel with a gate voltage swing of +15V to -6V. The turn-on voltage is regulated to maintain a stable 15V regardless of the output power level. Its outstanding EMC allows safe and reliable operation even in harsh industrial applications. Product Highlights Applications Ultra-compact dual-channel driver Industrial motor drives Highly integrated SCALE-2+ chipset Premium drives Gate current 15A Uninterruptible power supplies (UPS) 1W 85C output power per channel PV converters Advanced Active Clamping (AAC) Electric/hybrid drive vehicles +15V/-6V gate driving Switched mode power supplies (SMPS) IGBT blocking voltages up to 1200V Medical equipment (MRT, CT, X-ray) Reinforced insolation according to IEC 60664-1 Welding and plasma cutters Short delay and low jitter Multilevel applications, 3-Level NPC1 and 2 Lead-free UL recognition E321757 for UL508C (NMMS2/8) up to 85C UL recognition E346491 for UL60950-1 (NWGQ2/8) up to 85C www.power.com/igbt-driver Page 1 SCALE-2+ 2SC0115T2A0-12, 2SC0115T2A0C-12 Preliminary Data Sheet Safety Notice The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high- voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation This data sheet contains only product-specific data. For a detailed description, must-read application notes and important information that apply to this product, please refer to 2SC0115T Description & Application Manual on www.power.com/igbt-driver/go/2SC0115T. Absolute Maximum Ratings Parameter Remarks Min Max Unit Supply voltage V VCC to GND 0 16 V CC Logic input and output voltages Primary side, to GND -0.5 VCC+0.5 V SO current Failure condition, total current 20 mA Logic input/output voltage V To COMx -0.5 VISOx+0.5 V SOAx SOAx current 20 mA Gate peak current I Note 1 -15 +15 A out External gate resistance From GHx to GLx, switching frequency 25kHz 1 From GHx to GLx, switching frequency >25kHz 2.5 From GHx/GLx to IGBT gate 1.2 Average supply current I Notes 2, 3 355 mA CC Output power Ambient temperature 55C (Notes 4, 18) 1.4 W Ambient temperature 70C (Notes 4, 5, 18) 1.2 W Ambient temperature 85C (Notes 4, 5, 18) 1.0 W Ambient temperature 105C (Notes 4, 5) 0.4 W Test voltage (50Hz/1min.) Primary to secondary (Note 15) 4000 V AC(eff) Secondary to secondary (Note 15) 4000 V AC(eff) Switching frequency f 50 kHz dV/dt Rate of change of input to output voltage 50 kV/s Operating voltage Primary/secondary, secondary/secondary 1200 V peak Operating temperature -40 105 C Storage temperature Note 19 -40 50 C Surface temperature Only for 2SC0115T2A0C-12 (Note 20) 125 C www.power.com/igbt-driver Page 2