2SP0320x2Ax-12 2SP0320x2Ax-12 Preliminary Data Sheet Compact, high-performance, plug-and-play dual-channel IGBT driver based on SCALE-2 technology for individual and parallel-connected modules in 2-level, 3-level and multilevel converter topologies Abstract The SCALE-2 plug-and-play driver 2SP0320x2Ax-12 is a compact dual-channel intelligent gate driver designed for 1200V IGBT modules from Danfoss, Fuji or Infineon. The driver features an electrical interface (2SP0320T) or a fiber-optic interface (2SP0320V and 2SP0320S) with a built-in DC/DC power supply. The turn-on and turn-off gate resistors of both channels are not assembled in order to provide maximum flexibility. They must be assembled by the user before start of operation. Please refer to the paragraph on Gate Resistor Assembly for the recommended gate resistors. For drivers adapted to other types of high-power and high-voltage IGBT modules, refer to www.IGBT-Driver.com/go/plug-and-play Features Applications Plug-and-play solution Wind-power converters Allows parallel connection of IGBT modules Industrial drives For 2-level, 3-level and multilevel topologies UPS Shortens application development time Power-factor correctors Extremely reliable long service life Traction Built-in DC/DC power supply Railroad power supplies 20-pin flat cable interface (2SP0320T) Welding Fiber-optic links (2SP0320V & 2SP0320S) SMPS Duty cycle 0... 100% Radiology and laser technology Active clamping of V at turn-off Research ce IGBT short-circuit protection and many others Monitoring of supply voltage Safe isolation to EN 50178 UL compliant Suitable for 1200V IGBT modules Gate resistors not assembled www.IGBT-Driver.com Page 1 2SP0320x2Ax-12 Preliminary Data Sheet Safety Notice The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high- voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation This data sheet contains only product-specific data. For a detailed description, must-read application notes and common data that apply to the whole series, please refer to Description & Application Manual for 2SP0320T SCALE-2 IGBT Drivers (electrical interface) or Description & Application Manual for 2SP0320V and 2SP0320S SCALE-2 IGBT Drivers (fiber-optic interface) on www.IGBT-Driver.com/go/2SP0320. The gate resistors on this gate driver are not assembled in order to provide maximum flexibility. For the gate resistors required for specific IGBT modules, refer to the paragraph on Gate Resistor Assembly. Use of gate resistors other than those specified may result in failure. Mechanical Dimensions Dimensions: See the relevant Description and Application Manual Mounting principle: Connected to IGBT module with screws Fiber-Optic Interfaces Interface Remarks Part type Drive signal input 2SP0320V, fiber-optic receiver (Notes 21, 22) HFBR-2522Z Drive signal input 2SP0320S, fiber-optic receiver (Notes 21, 22) HFBR-2412Z Status output 2SP0320V, fiber-optic transmitter (Notes 21, 23) HFBR-1522Z Status output 2SP0320S, fiber-optic transmitter (Notes 21, 23) HFBR-1412Z www.IGBT-Driver.com Page 2