SCALE-2 2SP0320x2A0(C)-FF900R12IE4 2SP0320x2A0-FF900R12IE4 and 2SP0320x2A0C-FF900R12IE4 Data Sheet Compact, high-performance, plug-and-play dual-channel IGBT driver based on SCALE-2 technology for individual and parallel-connected modules in 2-level, 3-level and multilevel converter topologies Abstract The SCALE-2 plug-and-play driver 2SP0320x2A0-FF900R12IE4 / 2SP0320x2A0C-FF900R12IE4 (Coated version using ELPEGUARD SL 1307 FLZ/2 from Lackwerke Peters with a typical thickness of 50m) is a compact dual-channel intelligent gate driver designed for Infineons PrimePACK IGBTs FF900R12IE4. The driver features an electrical interface (2SP0320T) or a fiber-optic interface (2SP0320V and 2SP0320S) with a built-in DC/DC power supply. For drivers adapted to other types of high-power and high-voltage IGBT modules, refer to www.power.com/gate-driver/go/plug-and-play Features Applications Plug-and-play solution Wind-power converters Allows parallel connection of IGBT modules Industrial drives For 2-level, 3-level and multilevel topologies UPS Shortens application development time Power-factor correctors Extremely reliable long service life Traction Built-in DC/DC power supply Railroad power supplies 20-pin flat cable interface (2SP0320T) Welding Fiber-optic links (2SP0320V & 2SP0320S) SMPS Duty cycle 0... 100% Radiology and laser technology Active clamping of Vce at turn-off Research IGBT short-circuit protection and many others Monitoring of supply voltage Safe isolation to EN 50178 UL compliant Suitable for FF900R12IE4 PrimePACK is a trademark of Infineon Technologies AG, Munich www.power.com/gate-driver Page 1 SCALE-2 2SP0320x2A0(C)-FF900R12IE4 Data Sheet Safety Notice The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high- voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation This data sheet contains only product-specific data. For a detailed description, must-read application notes and common data that apply to the whole series, please refer to Description & Application Manual for 2SP0320T SCALE-2 IGBT Drivers (electrical interface) or Description & Application Manual for 2SP0320V and 2SP0320S SCALE-2 IGBT Drivers (fiber-optic interface) on www.power.com/gate-driver/go/2SP0320. When applying SCALE-2 plug-and-play drivers, please note that these drivers are specifically adapted to a particular type of IGBT module. Therefore, the type designation of SCALE-2 plug-and-play drivers also includes the type designation of the corresponding IGBT module. These drivers are not valid for IGBT modules other than those specified. Incorrect use may result in failure. Mechanical Dimensions Dimensions: Refer to the relevant Description and Application Manual Mounting principle: Connected to IGBT module with screws Fiber-Optic Interfaces Interface Remarks Part type Drive signal input 2SP0320V, fiber-optic receiver (Notes 21, 22) HFBR-2522ETZ Drive signal input 2SP0320S, fiber-optic receiver (Notes 21, 22) HFBR-2412Z Status output 2SP0320V, fiber-optic transmitter (Notes 21, 23) HFBR-1522ETZ Status output 2SP0320S, fiber-optic transmitter (Notes 21, 23) HFBR-1412Z www.power.com/gate-driver Page 2