2SC0108T2E0-17 Power Integrations

SCALE-2 2SC0108T2E0-17 2SC0108T2E0-17 Preliminary Data Sheet Dual Channel Ultra-compact Low-cost SCALE-2 Driver Core Short Description The low-cost SCALE-2 dual-driver core 2SC0108T2E0-17 (Lead free version of 2SC0108T2B0-17) combines unrivalled compactness with broad applicability. The driver is designed for universal applications requiring high reliability. The 2SC0108T2E0-17 drives all usual IGBT modules up to 600A/1200V or 450A/1700V. The embedded paralleling capability allows easy inverter design covering higher power ratings. Multi-level topologies are also supported. The 2SC0108T2E0-17 is the most compact driver core available for industrial applications, with a footprint of only 45 x 34.3mm and an insertion height of max. 16mm. It allows even the most restricted insertion spaces to be efficiently used. Compared with conventional drivers, the highly integrated SCALE-2 chipset allows about 85% of components to be dispensed with. This advantage is impressively reflected in increased reliability at simultaneously minimized cost. The 2SC0108T2E0-17 combines a complete two-channel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection as well as supply voltage monitoring. Each of the two output channels is electrically isolated from the primary side and the other secondary channel. An output current of 8A and 1W drive power is available per channel, making the 2SC0108T2E0-17 an ideal driver platform for universal usage in small and medium power applications. The driver provides a gate voltage swing of +15V/8V. The turn-on voltage is regulated to maintain a stable 15V regardless of the output power level. Its outstanding EMC allows safe and reliable operation in even hard industrial applications. Product Highlights Applications Ultra-compact dual channel driver General purpose drives Highly integrated SCALE-2 chipset Uninterruptible power supplies (UPS) Gate current 8A, 1W output power per channel Solar and wind power converters +15V/-8V gate driving Auxiliary converters for traction Blocking voltages up to 1700V Electro/hybrid drive vehicles Safe isolation to EN 50178 Driving parallel-connected IGBTs Short delay and low jitter Switched mode power supplies (SMPS) Interface for 3.3V...15V logic level Medical (MRT, CT, X-Ray) UL recognition E321757 for UL508C (NMMS2/8) Laser technology UL recognition E346491 for UL60950-1 (NWGQ2/8) Lead free www.power.com/igbt-driver Page 1 SCALE-2 2SC0108T2E0-17 Preliminary Data Sheet Safety Notice The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high- voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation This data sheet contains only product-specific data. For a detailed description, must-read application notes and important information that apply to this product, please refer to 2SC0108T Description & Application Manual on www.power.com/igbt-driver/go/2SC0108T Absolute Maximum Ratings Parameter Remarks Min Max Unit Supply voltage V VCC to GND 0 16 V CC Logic input and output voltages Primary side, to GND -0.5 VCC+0.5 V SOx current Failure condition, total current 20 mA Gate peak current I Note 1 -8 +8 A out External gate resistance Turn-on and turn-off 2 IGBT gate charge 6.3 C Average supply current I Notes 2, 3 260 mA CC Output power Ambient temperature <70C (Notes 4, 5) 1.2 W Ambient temperature <85C (Note 4) 1 W Test voltage (50Hz/1min.) Primary to secondary (Note 14) 5000 V AC(eff) Secondary to secondary (Note 14) 4000 V AC(eff) Switching frequency f 50 kHz dV/dt Rate of change of input to output voltage (Note 10) 75 kV / s Operating voltage Primary/secondary, secondary/secondary 1700 V peak Operating temperature Note 5 -40 +85 C Storage temperature -40 +90 C Recommended Operating Conditions Power Supply Remarks Min Typ Max Unit Supply voltage V VCC to GND 14.5 15 15.5 V CC www.power.com/igbt-driver Page 2