Product Specification PE42742 75 Terminated, 5 - 2200 MHz SPDT CATV UltraCMOS Switch Product Description Featuring Unpowered Operation The PE42742 is an SPDT UltraCMOS switch designed Features for broadband applications such as CATV, DTV, Multi- Meets FCC 15.115 spec of 80 dB Tuner DVR (Digital Video Recorder), Set-top Box, PCTV isolation 216 MHz and Game Boxes. It meets FCC 15.115 spec of 80 dB Unpowered operational state isolation 216 MHz and offers high isolation and low insertion loss in both a powered and a unique unpowered 3500 V HBM ESD tolerance, all pins default state. The PE42742 covers a broad frequency CTB performance of 90 dBc range from 5 MHz to beyond 2200 MHz with a single positive supply and CMOS control. It provides a smaller, High isolation: 63 dB 1000 MHz cost effective, more reliable and manufacturable Low insertion loss: typically 0.5 dB alternative to mechanical relays in set-top box 5 MHz, 0.8 dB 1000 MHz applications. CMOS single-pin control with logic The PE42742 is manufactured on Peregrines select UltraCMOS process, a patented variation of silicon-on- Single +3 volt supply operation insulator (SOI) technology on a sapphire substrate, Low current consumption: 8 A offering the performance of GaAs with the economy and integration of conventional CMOS. Figure 1. Functional Diagram Figure 2. Package Type 20-lead 4x4mm QFN RFC RF2 RF1 ESD ESD 75 75 CMOS Control Driver 71-0040-01 C1 C2 Document No. 70-0203-07 www.psemi.com 2006-2012 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 10 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: PE42742 Product Specification Table 1. Electrical Specifications +25C, V = +3V (Z = Z = 75 ) DD S L Parameter Condition Minimum Typical Maximum Units Operating Frequency 5 2200 MHz 220 MHz 0.45 0.55 dB 550 MHz 0.55 0.65 dB RF1-RFC Insertion Loss 810 MHz 0.7 0.8 dB 1000 MHz 0.75 0.85 dB 2200 MHz 1.7 1.8 dB 220 MHz 0.7 0.8 dB 550 MHz 0.8 0.9 dB RF2-RFC Insertion Loss 810 MHz 0.9 1 dB 1000 MHz 1.0 1.1 dB 2200 MHz 1.8 1.9 dB 220 MHz 81 94 dB 550 MHz 77 82 dB Isolation RF1 to RF2 (RFC-RF1 ON) 810 MHz 71.5 76 dB 2200 MHz 50 53.6 dB 220 MHz 81 92 dB 550 MHz 75 79 dB Isolation RF1 to RF2 (RFC-RF2 ON) 810 MHz 70.5 75 dB 2200 MHz 50 53 dB 220 MHz 71 74 dB 550 MHz 64 66 dB Isolation RF1 to RFC (RFC-RF2 ON) 810 MHz 62 64 dB 2200 MHz 52 57 dB 220 MHz 70.5 73 dB 550 MHz 64 66 dB Isolation RF2 to RFC (RFC-RF1 ON) 810 MHz 61.5 63 dB 2200 MHz 51 55 dB 2 IP2 RF1/RF2 5 MHz 1000 MHz 90/90 dBm 2 IIP3 RF1/RF2 5 MHz 1000 MHz 53/53 dBm 2 Input 1 dB Compression RF1/RF2 1000 MHz 30/24.5 32/26.5 dBm CTB / CSO 77 & 110 channels -90 / -77 dBc (Powered/Unpowered) Power Out = 44 dBmV Switching time 50 % CTRL to 10 / 90 RF 3 s 3 Video Feedthrough 5 MHz 1000 MHz 20 mVpp 5 Table 2. Electrical Characterization (Unpowered Operation) Parameter Condition Minimum Typical Maximum Units 1 Operating Frequency 5 2200 MHz 220 MHz 81 90.5 - dB 550 MHz 77 81.5 - dB 4 Isolation RF1 to RF2 810 MHz 70.5 77 - dB 2200 MHz 49 52.5 - dB Notes: 1. Device linearity will begin to degrade with input signals below 5 MHz 2. Measured in a 50 system 3. Measured with a 1 ns risetime, 0/3 V pulse and 500 MHz bandwidth 4. Minimum per FCC 15.115 spec 5. See Figure 9 for Power-Off insertion loss of RFC-RF1 2006-2012 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0203-07 UltraCMOS RFIC Solutions Page 2 of 10 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: