885069 Qorvo

885069 2350 MHz BAW Filter Applications For Band 40 TD-LTE applications 1.4 x 1.2 x 0.46 mm Product Features Functional Block Diagram Highly selective BAW filter achieving low insertion Top View Gnd loss over full bandwidth and operating conditions Performance -20 to +90 C Output 5 4 Excellent Wi-Fi rejection Single-ended operation Input 1 Ceramic chip-scale Package (CSP) 2 3 Gnd Small Size Hermetic RoHS compliant, Pb-free Gnd Pin Configuration General Description The 885069 is a high performance Bulk Acoustic Wave Pin No. Label (BAW) filter designed to meet the strict LTE rejection 1 Input requirements for use in B40. 4 Output 2,3,5 Ground 885069 is specifically designed to meet the high performance expectations of insertion loss and rejection for LTE uplink systems under all operating conditions. The 885069 uses common module packaging techniques to achieve the industry standard 1.4 x 1.2 x Ordering Information 0.46 mm footprint. Part No. Description 885069 Packaged Part 885069-EVB Evaluation board Standard T/R size = 10,000 units/reel Data Sheet: Rev A 10/22/2013 - 1 of 6 - Disclaimer: Subject to change without notice 2013 TriQuint 885069 2350 MHz BAW Filter Absolute Maximum Ratings 1. Operation of this device outside the parameter ranges given Parameter Rating may cause permanent damage. (1) Storage Temperature -40 to +90C 2. Specifications are not guaranteed over all operable (2) conditions. Operable Temperature -20 to +90C (3) 3. Input Power with applied CW signal in passband RF Input Power +27 dBm (1) Electrical Specifications -20C +25C +90C (2) Parameter Conditions Min Max Min Typ Max Min Max Unit 23002395 MHz - 3.0 - 1.3 2.7 - 2.7 dB Insertion Loss 23952400 MHz - 2.2 - 1.8 3.0 - 3.2 dB Input/output VSWR 23002400 MHz - 2.0:1 - 1.4:1 2.0:1 - 2.0:1 - Passband Ripple 23002400 MHz - 1.7 - 1.1 1.7 - 1.7 dB 101574 MHz 30 - 30 47 - 30 - dB 15741577 MHz 30 - 30 33 - 30 - dB 15771680 MHz 30 - 30 33 - 30 - dB 18451880 MHz 28 - 28 31 - 28 - dB 21102170 MHz 28 - 28 32 - 28 - dB Attenuation 2420-2427 MHz 8 - 15 49 - 45 - dB 24272460 MHz 45 - 45 57 - 45 - dB 24602500 MHz 38 - 38 50 - 38 - dB 46004800 MHz 28 - 28 32 - 28 - dB 69007200 MHz 20 - 20 23 - 20 - dB (3) 2422 7200 MHz 20 - 20 23 - 20 - dB Source/Load (4) Impedance Single-ended - - - 50 - - - Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3. 2. Typical values are derived through integration of the linear s-parameter over the indicated band at the specified temperature. 3. Integration of the linear s-parameter over an 18 MHz sliding frequency span. 4. This is the optimum impedance in order to achieve the performance shown Data Sheet: Rev A 10/22/2013 - 2 of 6 - Disclaimer: Subject to change without notice 2013 TriQuint