885071 Qorvo

885071 2.4 GHz WLAN/BT LTE Co-Existence Filter General Description The 885071 is a high-performance, high power Bulk Acoustic Wave (BAW) band-pass filter with extremely steep skirts, simultaneously exhibiting low loss in the WiFi band and high band-edge & near-in rejection. The 885071 enables coexistence of WiFi and LTE signals within the same device or in close proximity to one another. Its unique power handling capability allows for implantation into access points small cell base The 885071 uses common module packaging techniques to achieve the industry standard 1.4 x 1.2 x CSP-5CT package: 1.4 x 1.2 x 0.46 mm 0.46 mm footprint. The filter exhibits excellent power Handling capabilities. Product Features Low Loss in WLAN band with extended upper corner for inclusion of Bluetooth High Rejection in B7/B41 bands Functional Block Diagram Industry leading small size: 1.4 x 1.2 x 0.46 mm Performance over 40 to +95 C Gnd Ceramic chip-scale Package (CSP) Hermetically sealed Output 5 4 Pb RoHS compliant, Pb-free Input 1 2 3 Gnd Applications WiFi band pass filter that enables the coexistence of Gnd 3G/4G/LTE/TD-LTE & WiFi signals Top View High-power WLAN Access Points and Small Cells Sideband filtering of WiFi signal emissions Smart Meters and 2.4 GHz ISM applications Set Top Box, Gateways and WiFi Routers Pin Configuration - Single Ended Pin No. Label 1 Input Ordering Information 4 Output Part No. Description 2,3,5 Ground 885071 Packaged part 885071-EVB Evaluation board Standard T/R size = 10,000 units/reel DATA SHEET: REV I - 1 of 8 www.qorvo.com DEC 2017 Subject to change without notice 885071 2.4 GHz WLAN/BT LTE Co-Existence Filter Absolute Maximum Ratings MTTF Input Power Parameter Rating + 70C + 85C + 95C (2) (1) Storage Temperature -55 to +125 C (2) Operable Temperature -40 to +95 C + 24 dBm 183 M Hours 23.5 M Hours 6.56 M hours 1. Operation of this device outside the parameter 67.5 M Hours 8.65 M Hours 2.41 M Hours ranges given may cause permanent damage. + 26 dBm 2. Input Power with WLAN OFDM signal applied. + 28 dBm 24.8 M Hours 3.18 M Hours 0.89 M Hours (1)(6) Electrical Specifications Conditions unless otherwise noted: Device Temperature = 0C to +70C. (2) Parameter Conditions Min Typ (+25C) Max Units 2402.5 2421.5 MHz (WiFi Ch.1) 1.6 1.9 2407.5 2426.5 MHz (WiFi Ch.2) 1.3 1.7 (3) Insertion Loss 2412.5 2471.5 MHz (WiFi Ch.3-11) - 1.5 2.0 dB 2457.5 2476.5 MHz (WiFi Ch.12) 1.7 2.2 2462.5 2481.5 MHz (WiFi Ch.13) 1.9 2.6 2402.5 2421.5 MHz (WiFi Ch.1) 1.0 1.3 2407.5 2426.5 MHz (WiFi Ch.2) 1.0 1.2 Amplitude Variation 2412.5 2471.5 MHz (WiFi Ch.3-11) - 0.8 1.0 dB 2457.5 2476.5 MHz (WiFi Ch.12) 0.8 2.3 2462.5 2481.5 MHz (WiFi Ch.13) 1.7 4.3 2402.5 2476.5 MHz (WiFi Ch.1-12) 1.9 2.1 Input/Output VSWR - - 2462.5 2481.5 MHz (WiFi Ch.13) 1.8 3.0 (4) Impulse Response Length 2401 2483 MHz - 160 200 ns 100 2300 MHz 37 39 - dB (5) 2300 2370 MHz 50 53 - dB (5) 2496 2501 MHz (+25 to +70C) 32 55 - dB (5) 2496 2501 MHz (0C to +25C) 32 55 - dB (5) 56 57 - dB 2500 2505 MHz(+25 to +70C) (5) Attenuation 2500 2505 MHz(0C to +25C) 48 57 - dB (5) 49 54 - dB 2505 2570 MHz (5) 2570 2620 MHz 45 49 - dB (5) 44 47 - dB 2620 2690 MHz 4800 5000 MHz 37 48 - dB 31 38 - dB 7200 7500 MHz nd 2 Harmonics CW Tone = 2442 MHz 22.5 dBm - 60 - dBc rd 3 Harmonics CW Tone = 2442 MHz 22.5 dBm - 138 - dBc (7) Source/Load Impedance Single-ended 50 Notes: 1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over temperature. 2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. 3. Data is the integrated value of the linear s-parameter over 19 MHz window for the indicated band at the specified temperature. 4. Duration in ns between the maxima and the point 40 dB below the maxima. 5. Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature. 6. An external impedance matching network with 3 % tolerance will be necessary to achieve the stated specifications. 7. This is the optimum impedance in order to achieve the performance shown. DATA SHEET: REV I - 2 of 8 www.qorvo.com DEC 2017 Subject to change without notice