885135 RFMD + TriQuint = Qorvo 2439.5 MHz BAW Filter Applications Usable Bandwidth of 74 MHz (CH1-12) High-power WLAN Access Points and Small Cells Band-edge filtering of WiFi signal emissions at 2390MHz and 2483.5MHz WiFi bandpass filter that enables the coexistence of 4G (LTE/TD-LTE) & WiFi signals ISM band applications such as Smart Meters CSP-1713 package: 1.70 x 1.30 x 0.46 mm Portable Hotspots and Mobile Routers Functional Block Diagram Product Features Top View Industry leading small size: 1.70 x 1.30 x 0.46 mm Performance over -40 to +95C 6 9 8 7 High Rejection at 2390MHz, 2483.5MHz, B38/B40/B7/B41 Ceramic chip-scale Package (CSP) 10 5 Hermetically sealed Pb RoHS compliant, Pb-free 2 3 4 1 General Description Pin Configuration The 885135 is a high-performance, high power Bulk Pin No. Label Acoustic Wave (BAW) band-pass filter with extremely 9 Input steep skirts, simultaneously exhibiting low loss in the 6 Output WiFi band and high rejection in the band-edge and adjacent LTE /TD-LTE bands. 1,2,3,4,5,7,8,10 Case Ground The 885135 enables coexistence of WiFi and LTE signals within the same device or in close proximity to one another. Its unique power handling capability allows for implementation into high performance high power access points and small cell base stations. The 885135 uses common module packaging techniques to achieve the industry standard 1.7 x 1.32 x 0.46 mm footprint. The filter exhibits industry leading power handling capabilities up to 1W. Ordering Information Part No. Description 885135 Packaged part 885135-EVB Evaluation board Standard T/R size = 15,000 units/reel Advanced Data Sheet: Rev C 02-03-16 Disclaimer: Subject to change without notice - 1 of 8 - www.triquint.com /w w w .qo rv o .co m 2015 TriQuint 885135 RFMD + TriQuint = Qorvo 2439.5 MHz BAW Filter Absolute Maximum Ratings Parameter Rating (1) Storage Temperature 55 to +125C OperatingTemperature 40 to +95C 1. Operation of this device outside the parameter ranges given may cause permanent damage. (1) Electrical Specifications Conditions unless otherwise noted: Device Temperature = 40C to +95C. (2) (3) Parameter Conditions Min Typ Max Units 2402.5 2421.5MHz (WiFi Ch.1) 1.2 1.7 2407.5 2426.5MHz (WiFi Ch.2) 0.9 1.2 (4) 2412.5 2461.5MHz (WiFi Ch.3-9) 0.8 1.1 Insertion Loss - dB 2447.5 2466.5MHz (WiFi Ch.10) 0.8 1.1 2452.5 2471.5MHz (WiFi Ch.11) 0.9 1.3 2457.52476.5MHz (WiFI Ch. 12) 1.1 1.7 2402.5 2421.5MHz (WiFi Ch.1) 1.3 2.8 2407.5 2426.5MHz (WiFi Ch.2) 0.7 1.2 2412.5 2461.5MHz (WiFi Ch.3-9) 0.4 0.8 Amplitude Variation - dB 2447.5 2466.5MHz (WiFi Ch.10) 0.3 0.7 2452.5 2471.5MHz (WiFi Ch.11) 0.5 1.1 2457.52476.5MHz (WiFi Ch. 12) 1.1 3.5 (6) (6) Input/Output VSWR 2402.5 2476.5 MHz - 1.5 2.0 - 100 2300MHz 22 23 (5) 2300 2370MHz 20 25 (5) 2370 2390MHz 16 19 (5) 2483.5 2500MHz (-20 C to +25 C) 6 20 (5) 2483.52500 MHz (+25 C to +95 C) 15 20 Attenuation - dB (5) 2500 2520MHz 24 33 (5) 2520 2570MHz 29 32 (5) 2570 2620MHz 26 28 (5) 2620 2690MHz 25 28 4800 5000MHz 25 29 (7) Source/Load Impedance - 50 - Notes: 1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over temperature 2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3. Only at +25C. 4. Data is the integrated value of the linear s-parameter over a 19MHz range in the indicated band at the specified temperature. 5. Data is the integrated value of the linear s-parameter over a 5MHz range at the specified temperature. 6. An external impedance matching network with 3% tolerance will be necessary to achieve the stated specifications. 7. This is the optimum impedance in order to achieve the performance shown Advanced Data Sheet: Rev C 02-03-16 Disclaimer: Subject to change without notice - 2 of 8 - www.triquint.com /w w w .qo rv o .co m 2015 TriQuint