AG201-63G InGap HBT Gain Block Product Overview The AG201-63G is a general-purpose buffer amplifier that offers high dynamic range operation in a low-cost surface mount package. At 900 MHz, the AG201-63G provides typical 11 dB of gain, +19 dBm OIP3 and +6.5 dBm P1dB. This device combines dependable performance with consistent quality to maintain MTTF values exceeding 1000 SoT-636 Package years at mounting temperatures of +85C. The device is housed in a lead-free/Green/RoHS-compliant SOT-363 industry standards SMT package. Key Features DC6000MHz The AG201-63G consists of a Darlington-pair amplifier using the high reliability InGap/GaAs HBT process 11 dB Gain at 900 MHz technology and only requires DC-blocking capacitors, a +6.5 dBm P1dB at 900 MHz bias resistor, and an inductive RF choke for operation. +19 dBm OIP3 at 900 MHz Single Voltage Supply This broadband MMIC amplifier can be directly applied to Internal Matched to 50 various current and next generation wireless technologies such as GPRS, GSM, CDMA, and WCDMA. In addition, Robust 1000V ESD, Class 1C The AG201-63G will work for other various applications Lead-free / Green / RoHS Compliant SoT-636 Package within the DC to 6 GHz frequency range such as CATV and WiMAX. Applications Functional Block Diagram Mobile Infrastructure CATV / FTTX WLAN / ISM RFID WiMAX / WiBro Top View Pin Configuration Ordering Information Part No. Description Pin No. Function AG201-63G 3,000 pieces on a 7 reel 3 RF Input AG201-63 PCB 7002400MHz Evaluation Board 6 RF Output 1, 2, 4, 5 Ground Datasheet, December 11, 2018 Subject to change without notice 1 of 10 www.qorvo.com AG201-63G InGaP HBT Gain Block Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ Max Units Storage Temperature 55 to +125C Device Voltage (VDEVICE) +4 V Operational Temperature 55 to +105C Device Current (ICC) 20 mA Device DC Voltage +4.5 V TCASE 40 +105 C 6 RF Input Power (continuous) +10 dBm Tj for >10 hours MTTF +177 C Exceeding any one or a combination of the Absolute Maximum Rating Electrical specifications are measured at specified test conditions. conditions may cause permanent damage to the device. Extended Specifications are not guaranteed over all recommended operating application of Absolute Maximum Rating conditions to the device may conditions. reduce device reliability. Electrical Specifications (1) Parameter Conditions Min Typ Max Units Operational Frequency Range DC 6000 MHz Test Frequency 900 MHz Gain 11.3 dB Input Return Loss 25 dB Output Return Loss 16 dB Output P1dB +6.5 dBm Output IP3 Pout=-10dBm/tone, f=10MHz +19.1 dBm Output IP2 +27 dBm Noise Figure 4.4 dB Test Frequency 1900 MHz Gain 10 11 12 dB Output P1dB +5.8 dBm Output IP3 Pout=-10dBm/tone, f=10MHz +18.5 dBm Device Voltage +4 V Device Current 20 mA Thermal Resistance, jc Junction to case 410 C/W Notes: 1. Test conditions unless otherwise noted: Supply Voltage = +5.0V, RBIAS = 49.9 , Temp=+25C, 50 system. Datasheet, December 11, 2018 Subject to change without notice 2 of 10 www.qorvo.com