QPA9133 3.3 5.0 GHz 100 Differential Input Gain Block Product Overview The QPA9133 is an 100 differential input to 50 single- ended output, wideband gain block. It is well suited as the 5G m-MIMO BTS Tx path gain stage, to directly interface with the DAC of the transceiver, eliminating the need for a discrete Balun. 12-pin, 2x2mm SMT Package With Qorvos GaAs E-pHEMT process, this amplifier delivers exceptional performance with 18dB of small signal gain and 34 dBm output 3rd order intercept (OIP3). The Key Features amplifier has excellent gain flatness of 0.5 dB over any 400 3.3GHz to 5.0 GHz Operational Frequency MHz bandwidth and a CMRR of 35dB. The amplifier features a shut-down function through V control Pin. PD 100 Ohm Differential Input 50 Ohm Single-Ended Output The QPA9133 is optimized over 3.3 GHz to 5.0 GHz band +34 dBm OIP3 and is housed in a compact 2X2mm SMT package 18dB Gain Small 2x2mm SMT Package Functional Block Diagram Applications 5G m-MIMO Mobile Infrastructure General Purpose Wireless TDD / FDD System Ordering Information Part No. Description QPA9133TR7 2500 pcs on 7 reel (standard) QPA9133EVB-01 Differential Input Evaluation Board Top View Datasheet, Rev. D, April 22, 2020 Subject to change without notice 1 of 11 www.qorvo.com QPA9133 3.3 5.0 GHz 10 0 Differential Input Gain Block Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ Max Units Storage Temperature -65 to +150C Device Voltage (VDD) +3.3 +5 +5.25 V RF Input Power, CW, 50, T=25C +22 dBm TCASE 40 +105 C 6 Device Voltage (VDD) +7 V Tj for >10 hours MTTF +190 C Dissipated Power (P ) 0.7 W Electrical specifications are measured at specified test conditions. DISS Specifications are not guaranteed over all recommended operating Exceeding any one or a combination of the Absolute Maximum Rating conditions. conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications (1) Parameter Conditions Min Typ Max Units Operational Frequency Range 3300 5000 MHz Test Frequency 3500 MHz (2) Small Signal Gain 17 18 21 dB Gain Flatness Any 400 MHz BW within band 0.5 dB (2) Input Return Loss 10 dB Output Return Loss 10 dB Output P1dB +18 +19 dBm Output IP3 Pout=+1 dBm/tone, f=1MHz +29 +34 dBm Input Impedance Differential 100 ohm Noise Figure Input Balun and PCB trace losses deducted 1.8 dB Device Current, ON VPD = 0.63 V 70 110 mA Device Current, OFF VPD = 1.17 V 4 mA V , Logic Low 0 0.63 V PD V , Logic High 1.17 V V PD DD I , Control Current V Logic High 150 A PD PD Switching Time 50% DC to 10/90% RF 100 nsec Thermal Resistance, jc Junction to case 50 C/W Notes: 1. Test conditions unless otherwise noted: V = +5.0V, V = +0.63 V, I = 70 mA, Temp=+25C, 50 system. DD PD DD 2. Calculated or converted from 3 port S-Parameter measurement, and assuming an ideal Balun at differential port. Logic Table Parameter, V High Low PD Device State OFF ON Datasheet, Rev. D, April 22, 2020 Subject to change without notice 2 of 11 www.qorvo.com