QPC3024SR Qorvo

QPC1022 Broad Band Low Distortion SPDT Switch General Description The QPC1022 is a single pole dual-throw (SPDT) switch designed for switching applications requiring very low insertion loss and high power handling capability with minimal DC power consumption. The excellent linearity performance achieved by the QPC1022 makes it ideal for 9 Pin 1.1x1.5mm LGA Package use in cellular base. This switch offers very high isolation between RF ports providing greater separation between Product Features transmit and receive paths. The QPC1022 is packaged in a very compact 1.1mm x 1.5mm x 0.375mm (typical) 9-Pin 5MHz to 6GHz Operation LGA package. Low Insertion Loss: 0.25dB at 2GHz Harmonics: 2fo of -106dBc at 1980MHz 3fo of -94dBc at 1980MHz High Isolation: 56dB at 204MHz 39dB at 2GHz High IP3: Functional Block Diagram 76 dBm at 1.9GHz Compatible with Low Voltage Logic (VHIGH Minimum = 1.3V) No External DC Blocking Capacitors Required on RF Paths Unless DC is Applied Externally QPC1022 RF1612 1000V HBM ESD Rating on All Ports RF1 ANT RF2 Applications Cellular BTS Post PA Switching CTRL EN VDD General Purpose Switching Applications Ordering Information Part No. Description QPC1022SB Sample Bag with 5 pieces QPC1022SR Sample Reel with 100 pieces QPC1022TR7 Standard 7 Reel with 2,500 pieces Fully Assembled 50 Ohm Evaluation QPC1022PCK401 Board and Sample Bag with 5 pieces Data Sheet Rev E. August 16, 2018 Subject to change without notice 1 of 9 www.qorvo.com QPC1022 Broad Band Low Distortion SPDT Switch Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ Max Units Storage Temperature 40 to +150C Device Voltage (Vdd) +2.4 +5 +5.8 V Operating Temperature (Tcase) -40 to 105C T 40 +105 C CASE Maximum Vdd 6.0 V Tj +125 C Maximum EN 3.0 V RF input Power 5MHz 85C 33 dBm Maximum CTRL 3.0 V RF input power >20MHz 85C 37 dBm Electrical specifications are measured at specified test conditions. 33 dBm : 5MHz Max Input Power at 105C Specifications are not guaranteed over all recommended operating 37 dBm : >20MHz conditions. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications (1) Parameter Conditions Min Typ Max Units Operational Frequency Range 5 6000 MHz Insertion Loss RF1/RF2 to ANT 5.0MHz to 1.0GHz 0.2 0.4 dB 1GHz to 2.0GHz 0.25 0.4 dB 2.0GHz to 2.5GHz 0.26 dB 2.5GHz to 3.5GHz 0.35 dB 3.5GHz to 3.8GHz 0.38 dB 3.8GHz to 6GHz 0.46 dB Isolation RF1 to RF2 5.0MHz to 200MHz 56 dB 200MHz to 1.0GHz 39 46 dB 1.0GHz to 2.0GHz 32 39 dB 2.0GHz to 2.5GHz 36 dB 2.5GHz to 3.5GHz 34 dB 3.5GHz to 3.8GHz 33 dB 3.8GHz to 6GHz 29 dB RF Port Return Loss (ANT, RF1, RF2) 5.0MHz to 1.0GHz 31 dB 1GHz to 2.0GHz 23 dB 2.0GHz to 2.5GHz 22 dB 2.5GHz to 3.5GHz 18 dB 3.5GHz to 3.8GHz 17.5 dB 3.8GHz to 6GHz 14.5 dB Harmonics 2fo RFin = 35dBm, 915MHz -109 dBc RFin = 33dBm, 1980MHz -106 -80 dBc Harmonics 3fo RFin = 35dBm, 915MHz -98 dBc RFin = 33dBm, 1980MHz -94 -80 dBc Notes: 1. Test conditions unless otherwise noted: V = +5.0V, Temp=+25C, 50 system. DD Data Sheet Rev E. August 16, 2018 Subject to change without notice 2 of 9 www.qorvo.com