QPC6082 GENERAL PURPOSE SP8T SWITCH Product Overview The QPC6082 is a low loss, high isolation SP8T switch with performance optimized for CDMA, WCDMA & LTE applications requiring high linearity The RF and antenna ports can be directly connected in 50 systems and control logic is compatible with +1.3V to 14 Pad 2.0mm x2.0mm x 0.55mm QFN Package +1.8V systems. DC blocking caps are not required if there is no external DC voltage present at the RF or antenna ports. The supply voltage is intended for connection to Key Features +2.85V systems but the device is operable from +2.4V to Very Low Insertion Loss: 0.4dB typ. In Band 5 +4.5V. High Port-to-Port Isolation: 31dB typ. In Band 5 The standard 14 pad QFN package and compact 2.0mm x Power Handling up to +32dBm into 50 2.0mm size offers designers a compact, easy-to-use, GPIO Interface for +1.3V to +1.8V Control Logic switch component for quick integration into multimode, Multi-Band Operation 700MHz to 2700MHz multi-band systems. Compact 2.0mmx2.0mm QFN Package No DC Blocking Capacitors Required Functional Block Diagram (unless external DC is applied to the RF ports) Applications Data Cards IoT Telemetry Automotive Cellular Modems and USB Devices Multi-Mode WCDMA, LTE Applications Ordering Information Part No. Description Top View QPC6082 SP8T Switch for 3G/4G QPC6082SB Sample Bag with 5 pieces QPC6082SQ Sample Bag with 25 pieces QPC6082SR Sample Reel with 100 pieces QPC6082TR7 2500-PC Taped on 13 Reel Fully QPC6082PCK401 Assembled EVB + 5 Piece Sample Bag th Data Sheet August 26 , 2016 Subject to change without notice 1 of 11 www.qorvo.com QPC6082 GENERAL PURPOSE SP8T SWITCH Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ Max Units Storage Temperature 40 to +125C Device Voltage (V ) +2.4 +2.85 +4.5 V DD Operating Temperature 30 to +90C VDD Supply Current - 80 120 A Maximum V +6.0 V DD CTL1,2,3 Logic Low Voltage 0.00 - +0.45 V Maximum V +3.0 V (1) CTRL CTL1,2,3 Logic High Voltage +1.3 - +2.7 V Max Input Power 1:1 VSWR, +25C +38.5dBm CTL1,2,3 Logic High Current - 5 A (Momentary Infrequent (2) Switching Time 2 s 6:1 VSWR, +25C +35.0dBm Occurrence) (3) Turn-On Time 4 s 1:1 VSWR, +25C +36.5dBm Max Input Power Electrical specifications are measured at specified test conditions. (Continuous Operation) Specifications are not guaranteed over all recommended operating 6:1 VSWR, +25C +35.5dBm conditions. Exceeding any one or a combination of the Absolute Maximum Rating Notes: conditions may cause permanent damage to the device. Extended 1. V must be > V at all times. DD CTRL application of Absolute Maximum Rating conditions to the device may 2. 10% to 90% RF. reduce device reliability. 3. 3. Time from VDD=0V to part ON and RF at 90%. Electrical Specifications (1) Parameter Conditions Min Typ Max Units 704787MHz - 0.40 0.55 815960MHz - 0.40 0.55 Insertion Loss RFX to ANT 17101980MHz - 0.50 0.70 dB 21102170MHz - 0.66 0.79 23002690MHz - 0.76 0.90 Low Band, 2fo fo=824MHz - -115 -96 Low Band, 3fo fo=824MHz - -84 -81 High Band, 2fo fo=1980MHz - -99 -86 Harmonics Pin = +28dBm, 50 dBc High Band, 3fo fo=1980MHz - -82 -76 High Band, 2fo fo=2570MHz - -92 -88 High Band, 3fo fo=2570MHz - -79 -75 TX Carrier at 897.5MHz at +21dBm Low Band CW Blocker at 1840 MHz at -15dBm 113 117 - dB Measured RX frequency = 942.5MHz Input IP2 TX Carrier at 1880MHz at +21dBm High Band CW Blocker at 3840 MHz at 15dBm 115 118 - dB Measured RX frequency = 1960MHz TX Carrier at 897.5MHz at +21dBm Low Band CW Blocker at 1840MHz at 15dBm 66 68 - dB Measured RX frequency = 942.5MHz Input IP3 TX Carrier at 1880MHz at +21dBm High Band CW Blocker at 3840MHz at 15dBm 67 69 - dB Measured RX frequency = 1960MHz Triple Beat Ratio VSWR=2:1, BC0/BC1/BC4/BC5/BC14/BC15 81 - - dBc VSWR 7042690MHz - 1.1:1 1.5:1 - Notes: 1. Test conditions unless otherwise stated: all unused RF ports terminated in 50, Input and Output = 50, Temp. = +25C, V = +2.85V, V DD CTRL High = +1.8V,V Low = 0V CTRL th Data Sheet August 26 , 2016 Subject to change without notice 2 of 11 www.qorvo.com