QPC7512 CATV SPDT Reflective Switch (53300MHz) General Description The QPC7512 is a high isolation Silicon on Insulator (SOI) single pole double throw (SPDT) reflective switch designed for use in CATV, satellite set top and other high- performance communications systems. 2.0 x 2.0mm 12-lead QFN Featuring a single supply with a single CMOS/TTL compatible control line, QPC7512 features low insertion Product Features loss and high isolation throughout its bandwidth making it an optimal choice for operation from 5MHz to 3.3GHz. 5MHz to 3300MHz Operation QPC7512 offers excellent linearity and power handling Optimized for 75 Applications (can be also be used in capability thanks to its SOI process and does not require 50 applications). blocking caps on the RF ports if DC is not present on the Low Insertion Loss: 0.22dB at 1GHz RF ports. QPC7512 is packaged in a space saving 2.0 x 2.0 mm 12 lead QFN. High Isolation: 42dB at 1GHz High IP3: 75dBm at 1GHz Compatible with Low Voltage Logic (VHIGH Minimum = 1.3V) Functional Block Diagram No External DC Blocking Capacitors Required on RF Paths Unless DC is Applied Externally 2000V HBM ESD Rating on All Ports Applications Extended Spectrum DOCSIS CATV Amplifiers CATV Head End Fiber Deep Nodes Cable Set Top Box Satellite Set Top Box Ordering Information Part Number Description QPC7512SB Sample Bag with 5 pieces QPC7512SR Short Reel with 100 pieces QPC7512TR7 Standard Reel with 2,500 pieces QPC7512PCK-01 75 PCBA with 5-piece sample bag 2020 Qorvo US, Inc. Qorvo Confidential & Proprietary Information Data Sheet Rev. C, December 4, 2020 1 of 15 www.qorvo.com Subject to change without notice All rights reserved QPC7512 CATV SPDT Reflective Switch (53300MHz) Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ Max Units Storage Temperature 50 to +150C Device Voltage (V ) +2.7 +5.0 +5.5 V DD Operating Temperature 40 to +105C Device Current, 5V (I ) 91 A DD Maximum VDD 6.0V Device Current, 3V (IDD) 85 Maximum VEN, VCTRL 3.0V VEN, VCTRL High 1.3 2.7 V +30dBm(5-25MHz) VEN, VCTRL Low 0 0.45 V +33dBm (25-500MHz) PIN Max (CW) Electrical specifications are measured at specified test conditions. +36dBm (>500MHz) Specifications are not guaranteed over all recommended operating Exceeding any one or a combination of the Absolute Maximum Rating conditions. conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications (1) Parameter Conditions Min Typ Max Units (1) Operational Frequency Range 5 3300 MHz 5MHz 0.15 dB 5-1000MHz 0.22 dB Insertion Loss 1000-2000MHz 0.33 dB 2000-3000MHz 0.40 dB 3300MHz 0.45 dB 550MHz 71 dB 50-1000MHz 42 dB Isolation, RFC - RFx 1000-2000MHz 35 dB 2000-3000MHz 29 dB 3300MHz 27 dB 550MHz 71 dB 50-1000MHz 43 dB Isolation, RF1 RF2 1000-2000MHz 35 dB 2000-3000MHz 29 dB 3300 MHz 27 dB 550MHz 40 dB 50-1000MHz 22 dB Input Return Loss RFC 1000-2000MHz 20 dB 2000-3000MHz 23 dB 3300MHz 33 dB 550MHz 40 dB 50-1000MHz 22 dB Output Return Loss RFx 1000-2000MHz 20 dB 2000-3000MHz 23 dB 3300 MHz 28 dB Notes: 1. Test conditions unless otherwise noted: V = +3.3V, Temp=+25C, 75 test system, QPC7512-4000(C) EVB. DD 2020 Qorvo US, Inc. Qorvo Confidential & Proprietary Information Data Sheet Rev. C, December 4, 2020 2 of 15 www.qorvo.com Subject to change without notice All rights reserved