QPQ1906 Wi-Fi/IoT bandBoost Filter Product Overview The Qorvo QPQ1906 is an high-performance, high power, Bulk Acoustic Wave (BAW) band-pass filter with extremely steep skirts, simultaneously exhibiting low loss in the Wi-Fi band (Channels 10-11) and high near-in rejection in the 2.4GHz lower frequency channels. The filter module is specifically designed to enable unique use cases where sub-dividing usable channels within the available Wi-Fi spectrum becomes an advantage. End users will see a 2 Pad 1.6x2.0mm Laminate Package capability to deliver Wi-Fi in channels 10 or 11 while providing rejection in lower frequency channels to allow simultaneous use of Wi-Fi, Zigbee, Thread or BLE channels. Key Features Using common module packaging techniques to achieve the 2447-2472MHz industry standard footprint while negating as many external Low Insertion Loss in Wi-Fi Channels 10-11 passive placements to help end users ease of integration into High rejection in the lower band Wi-Fi (CH1-2), Zigbee, their circuits Thread or Bluetooth channels. Extended temperature performance from 0 to +90 C High power handling to +28dBm averaged Input Power Applications Access Points Functional Block Diagram Wireless Routers Residential Gateways Customer Premise Equipment Internet of Things Ordering Information Part Number Description QPQ1906SB Sample bag with 5 pieces QPQ1906SR 7 reel with 100 pieces QPQ1906TR13 13 reel with 10,000 pieces Top View QPQ1906EVB-01 Assembled Evaluation Board QPQ1905 Data Sheet 012120 Subject to change without notice www.qorvo.com 1 of 5 QPQ1906 Wi-Fi/IoT bandBoost Filter Absolute Maximum Ratings Parameter Conditions Rating Operating Case Temperature No damage -40 to 105C Storage Temperature -40 to 125C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Minimum Lifetime Ratings Parameter Conditions Rating 802.11n MCS0 signal, 10dB PAR, applied MTTF >1M hours, +90C +28 dBm to Pin 1 Recommended Operating Conditions Parameter Min. Typ. Max. Units TOPERATING* 0 +90 C Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. * TOPERATING is temperature at the package ground Electrical Specifications Conditions Min. Typ. Max. Units Parameter (1)(5) (INPUT-OUTPUT) Unless otherwise noted: Typ. T = 45C f = 2447.5-2466.5 MHz (CH10) - 1.2 2.6 dB (2) Insertion Loss f = 2452.5-2471.5 MHz (CH11) - 1.1 1.9 dB f = 2447.5-2466.5 MHz (CH10) - 0.8 1.5 dB Amplitude Variation f = 2452.5-2471.5 MHz (CH11) - 0.4 1.1 dB f = 2447.5-2466.5 MHz (CH10) 1.5:1 2:1 INPUT VSWR f = 2452.5-2471.5 MHz (CH11) 1.7:1 2:1 f = 2447.5-2466.5 MHz (CH10) 1.5:1 2.2:1 OUTPUT VSWR f = 2452.5-2471.5 MHz (CH11) 1.5:1 2:1 f = 2447.5-2466.5 MHz (CH10) 13 dB INPUT Return Loss f = 2452.5-2471.5 MHz (CH11) 11 dB f = 2447.5-2466.5 MHz (CH10) 14 dB OUTPUT Return Loss f = 2452.5-2471.5 MHz (CH11) 14 dB 3)(4) f = 2402.5-2421.5 MHz (CH1) 48 58 - dB Attentuation 3)(4) f = 2407.5-2426.5 MHz (CH2) 50 57 - dB Notes: 1) All specifications are based on the QPQ1906 Applications Circuit 2) Data is the integrated value of the linear s-parameter over 19 MHz channel 3) Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature 4) T = +25 to +65C 5) Pin 1 must be used for input. The large signal performance of this filter, such as power handling, may not be symmetric. QPQ1906 Data Sheet 012120 Subject to change without notice www.qorvo.com 2 of 5