QPQ2455 Wi-Fi LTE coexBoost BAWplexer Product Overview The Qorvo QPQ2455 is a high-performance, high power, BAWplexer which takes advantage of Qorvos coexBoost technologies to deliver extremely steep skirts, simultaneously exhibiting low loss in the Wi-Fi bands and high near-in rejection to prevent interference with LTE B7/B41/B38 and B40 signals, to a diplexer that has a low loss bandpass covering UNII1-8 Wi- Fi channels (5150-7125MHz.) The BAWplexer enables single antenna implementation combining both 2.4 GHz and 5-7 GHz Wi-Fi applications. The 4 Pad 1.9 x 1.5 mm Laminate Package 2.4 GHz path integrates a BAW filter to enable simultaneous usage of Wi-Fi and LTE signals without interference thus leading to longer range of Wi-Fi and an increase in network capacity. Key Features The 5-7 GHz path is a low-loss bandpass incorporating the expanded spectrum including all Wi-Fi channels in the UNII1-8 2402-2482MHz & 5150-7125 MHz bands. The diplexer is designed for thermally challenging Integrated 2.4GHz Rejection in LTE B7/B41/B38/B40 environment and exhibits excellent power handling capabilities. Wide passband that incorporates all Wi-Fi 6 & 6E channels Using advanced laminate module packaging techniques to in UNII1-8 achieve high integration in an industry leading compact footprint. Low insertion loss in both passbands The QPQ2455 negates the challenges of matching the filter to Extended temperature performance from -20 to +95 C the diplexer helping end customers achieve a faster time to High power handling to +28dBm averaged Input Power market Applications Functional Block Diagram Access Points Wireless Routers Residential Gateways Customer Premise Equipment Internet of Things Ordering Information Part Number Description QPQ2455SB Sample bag with 5 pieces QPQ2455SR 7 reel with 100 pieces QPQ2455TR13 13 reel with 10,000 pieces QPQ2455EVB-01 Assembled Evaluation Board Top View QPQ2455 Data Sheet 050820 Subject to change without notice www.qorvo.com 1 of 7 QPQ2455 Wi-Fi LTE coexBoost BAWplexer Absolute Maximum Ratings Parameter Conditions Rating Operating Case Temperature No damage -40 to 105C Storage Temperature -40 to 125C RF Signal CW, 25 C, 20 mS +39 dBm Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Minimum Lifetime Ratings Parameter Conditions Rating Power Handling 802.11n MCS7 signal, CH 11, applied to +28 dBm Pin 1 MTTF >2M hours, +70C Power Handling 802.11n MCS7 signal, CH165, applied to +28 dBm Pin 2 MTTF >2M hours, +70C Recommended Operating Conditions Parameter Min. Typ. Max. Units TOPERATING* -20 +95 C Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. * TOPERATING is temperature at the package ground 2.4 GHz Electrical Specifications Conditions Min. Typ. Max. Units Parameter (1)(4) (RFIN 2G-RFOUT) Unless otherwise noted: Typ. T = 35C f = 2402.5-2421.5 MHz (CH1) - 1.5 2.2 dB f = 2407.5-2426.5 MHz (CH2) - 1.3 1.9 dB (2) Insertion Loss f = 2412.5-2471.5 MHz (CH3-11) - 1.2 2.0 dB f = 2457.5-2476.5 MHz (CH12) - 1.5 2.2 dB f = 2462.5-2481.5 MHz (CH13) - 1.7 2.5 dB f = 2402.5-2421.5 MHz (CH1) - 0.9 1.7 dB f = 2407.5-2426.5 MHz (CH2) - 0.5 1.2 dB Amplitude Variation f = 2412.5-2471.5 MHz (CH3-11) - 0.7 1.1 dB f = 2457.5-2476.5 MHz (CH12) - 0.7 1.0 dB f = 2462.5-2481.5 MHz (CH13) - 0.7 1.5 dB RFIN 2G VSWR f = 2402.5-2481.5 MHz 1.8:1 2.4:1 RFOUT VSWR f = 2402.5-2481.5 MHz 1.6:1 2.1:1 f = 925 960 MHz 30 35 - dB f = 1559 1606 MHz 30 35 - dB f = 2110 2170 MHz 39 45 - dB (3) Attentuation f = 2300 2370 MHz 37 41 - dB (3) f = 2500 2505 MHz , T = +25 to +95 C 22 35 - dB (3) f = 2500 2505 MHz , T = -20 to +25 C 13 33 - dB (3) f = 2505 2570 MHz , T = +25 to +95 C 33 49 - dB QPQ2455 Data Sheet 050820 Subject to change without notice www.qorvo.com 2 of 7