R2005350L CATV Reverse Hybrid 200MHz 35dB Product Description R2005350L The R2005350L is a Hybrid Reverse amplifier. The part employs a Silicon die and is operated from 5 MHz to 200 MHz or 210 MHz. It provides excellent linearity and superior return loss performance with low noise and optimal reliability. Package: SOT-115J Product Features Excellent Linearity Superior Return Loss Performance Functional Block Diagram Extremely Low Distortion V+ Optimal Reliability Low Noise Unconditionally Stable Under all Terminations INPUT OUTPUT 35.3 dB Typ. Gain at 210 MHz 160 mA Max. at 24 VDC Applications 5 200 MHz CATV Amplifier for Reverse Channel Systems Ordering Information Part No. Description R2005350L Box with 50 pcs Data Sheet Rev. C, November 3, 2017 Subject to change without notice 1 of 5 www.qorvo.com R2005350L R2005350L Absolute Maximum Ratings Parameter Value /Range RF Input Voltage (single tone) 65 dBmV DC Supply over-voltage (5 minutes) +30 V Storage Temperature 40 to 100C Operating Mounting Base Temperature 30 to 100C Operation of this device outside the parameter ranges given above may cause permanent damage. Electrical Specifications Test Conditions: V+=24V, T =30C, Z =Z =75 Parameter MB S L Min Typ Max Unit Operational Frequency Range 5 210 MHz Gain fo = 5 MHz 34.5 35.1 35.5 Gain f = 200 MHz 34.5 35.3 36.0 o Gain fo = 210 MHz 34.5 35.3 36.0 1 Gain Slope f = 5 to 200 MHz -0.2 0.2 0.5 dB o 1 Gain Slope fo= 5 to 210 MHz -0.2 0.2 0.5 Gain Flatness fo= 5 to 200 MHz -0.1 +0.5 Gain Flatness f = 5 to 210 MHz -0.1 +0.5 o fo= 5 to 200 MHz 20.0 Input Return Loss dB f = 200 to 210 MHz 20.0 o fo= 5 to 200 MHz 20.0 Output Return Loss dB f = 200 to 210 MHz 20.0 o fo= 5 to 200 MHz -42.0 Reverse Isolation dB f = 200 to 210 MHz -42.0 o fo= 200 MHz 4.6 5.0 Noise Figure dB f = 210 MHz 4.7 5.0 o mA IDC 157 160 dBc CTB -72 2 dBc XMOD VO = 50.0dBmV, 7 channels flat -64 dBc CSO -72 dBc CTB -57 3 dBc XMOD V = 50.0dBmV, 28 channels flat -50 O dBc CSO -66 4 dBc d2 -70 5 dBmV Vo D = -60dB 62 IM 1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency. 2. 7 analog channels, NTSC frequency raster: T7-T13 (7.00MHz to 43.00MHz), +50dBmV flat output level. 3. 28 analog channels, NTSC frequency raster: T7-T13 plus 2-6 (55.25MHz to 83.25MHz) and A2-11 (109.25MHz to 199.25MHz), +50dBmV flat output level. 4. f1 = 83.25MHz V1 = 50dBmV f2 = 109.25MHz V2 = 50dBmV f-TEST = f1 + f2 = 192.5MHz. 5. f1 = 187.25MHz V1 = 50dBmV f2 = 149.25MHz V2 = V1 - 6dB f3 = 196.25MHz V3 = V1 6dB f-TEST = f1 + f2 f3 = 185.25MHz according to DIN45004B. Data Sheet Rev. C, November 3, 2017 Subject to change without notice 2 of 5 www.qorvo.com