RF56023.0V to 5.0V, 2.3GHz to 2.7GHz Linear Power Ampli- fier RF5602 3.0V TO 5.0V, 2.3GHz TO 2.7GHz LINEAR POWER AMPLIFIER Package Style: QFN, 16-Pin, 3mm x 3mm x 0.45mm 16 15 14 13 BIAS VCC 1 12 RF OUT Features st nd rd 1 2 3 32dB to 34dB Small Signal Gain Stage Stage Stage Input Interstage Interstage RF IN 2 11 RF OUT Match Match Match 2.5% EVM (RMS) at 27dBm, 5.0V 2.5% EVM (RMS) at 25.5dBm, 4.2V PDOWN 3 10 RF OUT Detector 2.5% EVM (RMS) at 24dBm, 3.3V Bias Integrated Power Detector on Die VREG1 4 9 GND Multiple Frequency Ranges 5 6 7 8 High Impedance Control Applications IEEE 802.11b/g/n WiFi Systems Functional Block Diagram 2.4GHz ISM Band Applications Product Description Commercial and Consumer The RF5602 is a linear power amplifier IC designed specifically for Systems medium power applications. The device is manufactured on an advanced WiBro 2.3GHz to 2.4GHz Band InGaP Heterojunction Bipolar Transistor (HBT) process, and has been Applications designed for use as the final RF amplifier in 802.11b/g/n access point WiFi 2.4GHz to 2.5GHz Band transmitters. The device is provided in a 3mm x 3mm x 0.45mm, 16-pin, Applications leadless chip carrier with a backside ground. The RF5602 is designed to maintain linearity over a wide range of supply voltages and power outputs. WiMAX 2.5GHz to 2.7GHz Band Applications Optimum Technology Matching Applied GaAs HBT SiGe BiCMOS GaAs pHEMT GaN HEMT GaAs MESFET Si BiCMOS Si CMOS BiFET HBT InGaP HBT SiGe HBT Si BJT LDMOS RF MICRO DEVICES, RFMD, Optimum Technology Matching, Enabling Wireless Connectivity, PowerStar, POLARIS TOTAL RADIO and UltimateBlue are trademarks of RFMD, LLC. BLUETOOTH is a trade- mark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. 2006, RF Micro Devices, Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical DS120213 support, contact RFMD at (+1) 336-678-5570 or customerservice rfmd.com. 1 of 27 VREG2 VCC1 VREG3 GND NC VCC2 PDETECT VCC2RF5602 Absolute Maximum Ratings Caution ESD sensitive device. Parameter Rating Unit Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Supply Voltage, RF applied -0.5 to +5.25 V DC Rating conditions to the device may reduce device reliability. Specified typical perfor- mance or functional operation of the device under Absolute Maximum Rating condi- Supply Voltage, no RF applied -0.5 to +6.0 V DC tions is not implied. The information in this publication is believed to be accurate and reliable. However, no DC Supply Current 800 mA responsibility is assumed by RF Micro Devices, Inc. RFM) for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No Input RF Power +10* dBm license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended appli- Operating Ambient Temperature -40 to +85 C cation circuitry and specifications at any time without prior notice. Storage Temperature -40 to +150 C RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free Moisture Sensitivity MSL1 per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. *Maximum Input Power with a 50 load Specification Parameter Unit Condition Min. Typ. Max. Nominal Condition T = 25C, V = 3.3V, 4.2V, and 5V, CC WiFi IEEE 802.11b/g/n V = 2.9V, Freq = 2450MHz, Duty Cycle 10 to 100% REG unless otherwise noted Frequency Range 2400 2500 MHz Compliance IEEE 802.11g/n and IEEE 802.11b Output Power 26 27 dBm With a standard IEEE 802.11g waveform (54Mbit/s), V CC = 5.0V EVM 2.5 3 % RMS, Mean (at 100% duty cycle over Full V and fre- REG quency ranges) IEEE 802.11b P 28 28.5 dBm OUT ACP1 -34 -30 using a standard IEEE 802.11b waveform at 1Mbps ACP2 -54 -50 using a standard IEEE 802.11b waveform at 1Mbps Output Power 25 25.5 dBm With a standard IEEE 802.11g waveform (54Mbit/s), V CC = 4.2V EVM 2.5 3 % RMS, Mean (at 100% duty cycle over Full V and fre- REG quency ranges) IEEE 802.11b P 27 dBm OUT ACP1 -34 -30 using a standard IEEE 802.11b waveform at 1Mbps ACP2 -54 -50 using a standard IEEE 802.11b waveform at 1Mbps Output Power 23.5 24 dBm With a standard IEEE 802.11g waveform (54Mbit/s), V CC = 3.3V EVM 2.5 3.5 % RMS, Mean (at 100% duty cycle over Full V and fre- REG quency ranges) IEEE 802.11b P 25.5 dBm OUT ACP1 -34 -30 using a standard IEEE 802.11b waveform at 1Mbps ACP2 -54 -50 using a standard IEEE 802.11b waveform at 1Mbps 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical 2 of 27 support, contact RFMD at (+1) 336-678-5570 or customerservice rfmd.com. DS120213