TGS4310
13-19GHz 5W SPDT Switch
Applications
Ku-Band High Power Switching
Communication Systems
Radar
Product Features
Functional Block Diagram
Frequency Range: 13 - 19 GHz
J2
RF1 (Output 1)
Insertion Loss: < 1.7 dB
2
Power Handling: 5 W (P-0.1dB)
Isolation: > 20 dB
Return Loss: > 15 dB
Control Voltages V = 7V, V = 0 V/7 V
DD BIT
Reflective Switch
J1
1
RFC (Input)
Chip Dimensions: 1.00 x 2.14 x 0.1 mm
3
VBIT
VDD
4
5
J3
RF2 (Output 3)
Pin Configuration
General Description
The TGS4310 is a single-pole, double-throw (SPDT)
Pin No. Label
reflective switch fabricated on TriQuints 0.15um GaAs
1 RFC
production process. Operating from 13 to 19 GHz, the
2 RF1
part handles 37 dBm input power with < 0.1 dB
compression and less than 1.7 dB insertion loss. 3 V
BIT
4 V
DD
The TGS4310 is available in a small 1.00 x 2.14 mm
5 RF2
die size and requires very little control current allowing
for easy system integration without impacting system
power budgets.
The TGS4310 is ideally suited for Ku-band high power
switching applications across both defense and
Ordering Information
commercial applications.
Part No. ECCN Description
Lead-free and RoHS compliant.
TGS4310 EAR99 13-19 GHz 5 W SPDT Switch
Preliminary Datasheet: Rev - 07-18-14 - 1 of 9 - Disclaimer: Subject to change without notice
2014 TriQuint
www.triquint.com
TGS4310
13-19GHz 5W SPDT Switch
Absolute Maximum Ratings
Recommended Operating Conditions
Parameter Rating
Parameter Min Typ Max Units
7.5 V
Voltages (V , V )
DD BIT Frequency 13 19 GHz
Currents (I , I ) -1.7 / +1.7 mA
Input Power Handling
DD BIT
37.5 dBm
(CW)
1.9 W
Power Dissipation, T = 85 C
BASE
Reference Voltage, V 7 V
RF Input Power (CW) 38 dBm DD
Control Voltage, V 0/7 V
BIT
Channel Temperature, T 200 C
CH
Currents (I , I ) See plots p. 5 mA
DD BIT
Mounting Temperature (30 sec) 320 C
Operating Temperature -40 +85 C
Storage Temperature -55 to 150 C
Electrical specifications are measured at specified test
Operation of this device outside the parameter ranges
conditions. Specifications are not guaranteed over all
given above may cause permanent damage.
recommended operating conditions.
Electrical Specifications
Test conditions unless otherwise noted: V = 7 V, V = 0/7 V, Temp= +25C. Z = 50
DD BIT 0
Parameter Min Typ Max Units
Operational Frequency Range 13 19 GHz
P-0.1dB (CW) 37 dBm
Insertion Loss (On-State) < 1.7 dB
Input Return Loss On-State (Common Port RL) > 15 dB
Output Return Loss On-State (Switched Port RL) > 15 dB
Isolation (Off-State) > 20 dB
Output Return Loss Off-State (Isolated Port RL) 5 dB
Insertion Loss Temperature Coefficient 0.002 dB/ C
Preliminary Datasheet: Rev - 07-18-14 - 2 of 9 - Disclaimer: Subject to change without notice
2014 TriQuint
www.triquint.com