Fully RoHS 10/10 conform Features Full power at 100C ambient temperature DC/DC Converter 1kVDC or 3kVDC isolation option Suitable for fully automated assembly Unregulated (including vapor phase soldering) Converters Optional continuous short circuit protection R0.25S & R0.25D(A) Description 0.25 Watt The R0.25S and R0.25D converters are of the enclosed open frame type, i.e. they are not potted. The converters are typically used in general purpose and industrial low ower isolation and voltage SMD matching applications where an SMD converter is required. The converter series feature an extended ambient temperature operating range of -40C to +100C without derating and optional continuous short Single, Dual and circuit protection. In addition to single, dual and independent outputs, two isolation options and three different case formats, the converters are also available prepacked as tape and reel for use with Independent automatic insertion machines. Outputs Selection Guide Part nom. Input Output Output max. Capacitive (2) Number Voltage Voltage Current Load VDC VDC mA F (3) (4,5) R0.25S -xx3.3 3.3, 5, 12, 15, 24 3.3 76 1000 (3) (4,5) R0.25S -xx05 3.3, 5, 12, 15, 24 5 50 470 (3) (4,5) R0.25S -xx09 3.3, 5, 12, 15, 24 9 28 470 (3) (4,5) R0.25S -xx12 3.3, 5, 12, 15, 24 12 21 150 (3) (4,5) R0.25S -xx15 3.3, 5, 12, 15, 24 15 17 68 (3) (4,5) R0.25S -xx24 3.3, 5, 12, 15, 24 24 10.4 68 (3) (4,5) R0.25D -xx3.3 3.3, 5, 12, 15, 24 3.3 38 470 (3) (4,5) R0.25D -xx05 3.3, 5, 12, 15, 24 5 25 220 (3) (4,5) R0.25D -xx09 3.3, 5, 12, 15, 24 9 14 68 (3) (4,5) R0.25D -xx12 3.3, 5, 12, 15, 24 12 10.4 68 (3) (4,5) R0.25D -xx15 3.3, 5, 12, 15, 24 15 8.3 68 (3) (4,5) R0.25D -xx24 3.3, 5, 12, 15, 24 24 5.2 33 (3) (4,5) E358085 R0.25DA -xx0505 3.3, 5, 12, 15, 24 5/5 25/25 220/220 (3) (4,5) R0.25DA -xx1212 3.3, 5, 12, 15, 24 12/12 10/10 68/68 Notes: Note1: Efficiency is tested at nominal input and full load at +25C ambient Note2: Max Cap Load is tested at nominal input and full resistive load and is defined as the capacitive load that will allow start up in under 1s without damage to the converter UL60950-1 certified CAN/CSA-C22.2 No. 60950-1-07 certified Model Numbering IEC/EN60950-1 certified EN55032 compliant CB report R0.25S - / (5) Packaging Single, Dual or Independent DA (4) (3) Protection and Isolation Option Pinning Output Voltage nom. Input Voltage Notes: Note3: R0.25S: without marking denotes 5 pins out of 8 fitted (includes /H option) with marking 8 denotes 8 pins out of 8 fitted (/H option not available) with marking 12 denotes 10 pins out of 12 fitted (includes /H option) R0.25D: without marking denotes 6 pins out of 10 fitted (includes /H option) R0.25D(A): with marking 10 denotes 10(7) pins out of 10 fitted (/H option not available) R0.25D: with marking 12 denotes 10 pins out of 12 fitted (includes /H option) Note4: standard part is without continuous short circuit protection add suffix /P for continuous short circuit protection add suffix /H for 3kVDC isolation (not available for R0.25S8, R0.25D10 and R0.25DA10) or add suffix /HP for 3kVDC isolation and continuous short circuit protection Note5: add suffix -R for tape and reel packaging (compatible with all other suffixes) www.recom-power.com REV.: 1/2019 ECO-1Typical Load Line R0.25S & R0.25D(A) DC/DC Converter Series Specifications (measured Ta= 25C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range 10% Efficiency 60% 70% Minimum Load 0% 20kHz 50kHz 90kHz Internal Operating Frequency Output Ripple and Noise 20MHz BW 100mVp-p Efficiency vs. Load R0.25S-xx05 R0.25D-xx05 100 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 20 3.305 3.305 0505 0505 10 10 1205 1205 0 0 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100 Output Load % Output Load % REGULATIONS Parameter Condition Value Output Accuracy 5.0% typ. / 7.0% max. Line Regulation low line to high line, full load 2.0% max. 3.3Vout 15.0% typ. / 20.0% max. 5, 5/5Vout 12.0% typ. / 15.0% max. (6) Load Regulation 10% to 100% load 9Vout 7.0% typ. / 10.0% max. 12, 12/12, 15, 24Vout 6.0% typ. / 10.0% max. Notes: Note6: Operation below 10% load will not harm the converter, but specifications may not be met Tolerance Envelope +10% +5% +5% Vnom -1% -5% 10 50 100 Output Load % continued on next page www.recom-power.com REV.: 1/2019 ECO-2 Efficiency % Output Voltage % Efficiency %