Features LIGHTLINE LED DRIVER AC/DC-Converter with 5 year Warranty Description The new RACD150A LED drivers offer constant output currents of 1400mA, 1050mA or 700mA, with voltages from 60V up to 210V. The series supports dimming via PWM or 1-10V signals and is fully IP67 sealed for outdoor as well as indoor applications. With their wide input voltage range of 90 to 305VAC, the new drivers can 150 Watt be used worldwide on 115Vac, 230Vac and 277Vac supplies. The converters operate with full load efficiencies of more than 93%, feature low THD (15%) and active PFC with power factors exceeding 0.98, and are fully protected against short circuit, overload and over-temperature conditions. Applications include high-power area Single lighting as well as car parks, warehouse or security lighting. The LED drivers are UL8750 and EN61347 certified, comply with FCC and European EMC standards and come with a full 5 year warranty. Output Selection Guide Part Input Rated Output Rated Number Voltage Range Power Voltage Range Output Current Efficiency (VAC) (W) (VDC) (mA) (%) RACD150-700A 90-305 147 60-210 700 92 RACD150-1050A 90-305 150 60-143 1050 92 RACD150-1400A 90-305 150 60-107 1400 91 Specifications (measured at 230VAC and 25C ambient temperature) RoHS 2011/65/EU Input Voltage Range 90-305 VAC or 127-430VDC 6/6 Input Frequency Range 47-63Hz. Power Factor Full Load, 120VAC >0.98 UL 8750 Certified Full Load, 240VAC >0.94 EN 61347 Certified 75% Load, 240VAC >0.90 DC Dimming Open = 100% DC 1-10V PWM Dimming Open = 100% Duty 10% - 100% RACD150-A Freq. 500Hz - 3000Hz Voltage Hi=10V, Low=0V THD ( 230VAC/50Hz) 700A 10% 1050A, 1400A 11% Input Current 115VAC 2A max. 240VAC 1A max. Derating-Graph Input/Output Isolation 3.75kVAC / 1min (Ambient Temperature) Input/Case Isolation 1.8kVAC / 1min Output/Case Isolation 0.5kVAC / 1min Leakage Current 230VAC <0.75mA A Inrush Current 240VAC cold start 65A max. Voltage Tolerance 10% . A Current Tolerance 5% (1) - A Ripple & Noise ( 20MHz bandwidth) 2000mV max. Over Voltage Protection 105 - 130% Rated Voltage Shutdown Mode , A Short Circuit Protection Constant current limit and recovers after fault condition is removed Over Temperature Protection Shutdown Mode A Operating Temperature Range (Refer to Output Load Derating Curve) Ambient -40C to +55C (free air convection) Case Temperature 100C max. 0, 0 * ++ / Operation Humidity 20%-90% RH Non-Condensing Storage Temperature -40C to +80C ) Storage Humidity 10%-95% RH Vibration 2G 10min/1Cycle, Period for 60 min 10-500Hz Refer to Application Notes continued on next page L-70 REV: 0/2015 www.recom-power.com High Output Voltage Universal AC Input Constant Current Operation Active Power Factor Correction IP67 Design for Indoor and Outdoor Use Compact Size Digital PWM and Analogue Voltage DimmingRACD150-A RACD150-A LIGHTLINE AC/DC-Converter Series Specifications (measured at 115VAC / 230VAC and 25C ambient temperature) Isolation Resistance 100M / 500VDC at 25C IP Rating IP67 Safety Standards UL/cUL LED Lighting Safety Report: E340696 UL8750 CE LVD Directive, Safety Report: 12CA61289-1 EN61347-2-13 CB Report: 11036253 001 IEC61347-2-13 Standards EMC Compatibility EN55015 FCC, Part 15 Harmonic Current EN61000-3-2 Class C EN61000-3-3 EMC Immunity EN61000-4-2, 3, 4, 5, 6, 11 EN61547 Dimension 226*68*39mm Weight 1.1kg MTBF using MIL-HDBK-217F (25C) 200 x 10 hours Notes: Note1: Ripple and Noise are measured at 20MHZ bandwith by using a12 twisted pair-wire terminated with 0.1uf & 47uf paralell application Note2: All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. B + . A A - , A A A A 3 * . , 3 9 G 7 5 G B 2H 5 B 2 ( > H > 7 7 < I ( G + 0 *E 8 2 2) - Maximum Number of LED drivers per circuit breakers Condition Circuit Breaker Circuit Breaker Current Typ 10A 16A 20A 25A 115VAC, 1Ohm C 5 8 9 12 90 phase angle B 4 7 8 9 230VAC, 1Ohm 90 phase angle C 5 13 16 19 B 5 8 9 11 277VAC, 1Ohm 90 phase angle C 9 15 18 21 Package Style and Pinning - / *% + % -.% * * 12 02 ) 6 *,% ) 69 1 4 ,% 0 6= 5 *3% ( - .. The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOMs explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 0/2015 L-71 A