30W Class II AC-DC LED Power Supply Features LIGHTLINE 500mA or 700mA Constant Current Drives 3 - 15 High brightness LEDs AC/DC-Converter Active Power Factor Correction >0.95 LED with 5 year Warranty Fused Input, Protected Output DRIVER 3kVAC Isolation UL-8750 Certified Output Connector to avoid miswiring Low Cost Long 5 Year Warranty 30 Watt PFC Description A compact 30W constant current switching power module suitable for driving up to 15 high power LEDs (Vf = 3.6V). Single The output current is fixed at 500mA or 700mA. Active power factor correction is standard. This series features both screw terminal and socket output connections. The socket connecter avoids the possibility of miswiring and damaging the LED load if the LEDs are preassembled into a wiring harness or lamp fitting. Output Selection Guide Part Input Voltage Input Current Output Output Max Number Range at full load Voltage Range Current (VAC) (mA) (VDC) (mA) LEDs RACD30-500 universal 390 10-56 500 15 x 2W RACD30-700 universal 390 10-43 700 12 x 3W, 12+12 x 1W Specifications (typical at 25C and after warm up time unless otherwise specified ) Input Voltage Range Standard 90-264VAC Rated Power 30 Watts max. RoHS 2011/65/EU 6/6 Input Frequency Range 47-63 Hz E340696 Power Factor Full Load, 115VAC/230VAC 0.9 UL-8750 Certified THD Full Load, 115VAC 13% max. EN 61347 Certified Full Load, 230VAC 11% max. Open Circuit Voltage 500mA Version 58VDC (Zener Clamp) 700mA Version 48VDC RACD30 Inrush Current (<2mS) 115VAC/230VAC 10A max. Input Current 230VAC, Full Load 390mA typ. Leakage Current 115VAC/240VAC - 60/50Hz 0.5mA typ. Input Fuse Standard T1A Output Current Accuracy (combined Tolerance, load Regulation and Line Regulation) 10% Minimum Load Open Circuit Protected 3 LEDs Hold Up Time 18ms min. Operating Frequency 40 - 100 kHz typ. Efficiency at Full Load 85% RMS Isolation Voltage (input to output) 3kVAC / 1 minute Temperature Coefficient 0.02%/C typ. Overload Protection 120% typ. Short Circuit Protection Continuous Current Limit Output Overvoltage Protection 500mA Version 56V Zener Diode Clamp 700mA Version 43V Zener Diode Clamp Overtemperature Protection Shutdown, Automatic restart after cooling down Operating Temperature Range Ambient Temperature -20C to +50C (free air convection) Case Temp. 85C max. (500mA version: 90C max.) Storage Temperature Range -40C to +100C Weight 200g Packing Quantity 1pcs Refer to Application Notes continued on next page L-42 REV: 0/2015 www.recom-power.comRACD30 RACD30 LIGHTLINE AC/DC-Converter Series (typical at 25C and after warm up time unless otherwise specified ) Specifications Humidity 95% RH max. IP Rating IP20, Indoor Use Only PCB Material Plastic Resin with Fibreglass (UL94V-0) Case Material Plastic Designed to meet Standards Electrical Lighting, EMC Emissions EN55015:2006 + A1: 2007 + A2:2009 Limits for Harmonics Emissions EN 61000-3-2:2006 EMC Compatability: Flicker and Voltage Variations EN 61000-3-3:2006 Electrical Lighting: EMC Immunity EN 61547:1995 + A1:2000 Class II Power Supply Safety UL1310 FCC FCC18A THD <20% Certifications LED Lighting Safety UL8750 SEMKO CE Certification, General Safety EN 61347-1: 2008 SEMKO CE Certification, Safety of AC supplied Control Gear for LED Modules EN 61347-2-13: 2006 Design Lifetime 25C ambient >70 x 10 hours in operation Connections AC Input Screw terminal LED Output Screw Terminal LED Output 5.5mm Socket with 2mm Pin (Suitable matching plug Switchcraft S760 or similar) Note: All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. Characteristic Maximum Number of LED drivers per circuit breakers Condition Circuit Breaker Circuit Breaker Current Typ 10A 16A 20A 25A 115VAC, 1Ohm C 32 48 57 72 90 phase angle B 24 38 46 58 230VAC, 1Ohm 90 phase angle C 38 62 74 92 B 28 44 53 66 277VAC, 1Ohm 90 phase angle C 44 71 84 106 Package Style and Pinning Connections - CN1 Function +%+ (> L VAC in (L) & % N VAC in (N) CN2 Function + , + LED+ 5 : ( ,+ - LED- . 5.5mm Socket Function *%+ % + Pin LED+ Shell LED- 2 Mounting screws are included Tolerance Tc=Case Temperature Measuring Point + XX =+/-1mm XX.X =+/-0.5mm The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOMs explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 0/2015 L-43