Constant Voltage Output Features LIGHTLINE ENEC, UL, RCM and CB Certified AC/DC-Converter Power Factor Corrected LED DRIVER with 5 year Warranty Short Circuit, Overload and Overtemperature Protected Description The RACV30 is the first of a new series of constant voltage LED drivers, ideal for powering LED strips and LED modules in applications such as cove lighting, signage, back lighting, channel letters, displays or under cabinet lighting. The input voltage range of 90 to 264VAC assures full functionality worldwide. The new drivers provide up to 30 watts 30 Watt PFC and are available with outputs of 12VDC or 24VDC. The output voltages are closely regulated to compensate for varying loads or supply changes (2% max.) Single CV Selection Guide Output Part Input Voltage Output Output Current Efficiency Number Range Voltage Range typ. (VAC) (VDC) (mA) (%) RACV30-24 90-264 24 0-1250 84 RACV30-12 90-264 12 0-2500 83 Specifications (typical at 25C, nominal input voltage and full load) Input Voltage Range 90-264VAC or 140-370VDC Input Frequency Range 47-63Hz Input Current Full Load < 380mA RoHS Power Factor Correction Full Load >0.92 2011/65/EU 6/6 E340696 THD Full Load, 115VAC 12% max. EN61347-2-13 Certified Inrush Current (2ms peak) 30A max. UL-8750 Certified Input Fuse internal 2A/250V cUL-8750 Certified Output Voltage Accuracy (Output Load min <-> max) 5% Load Regulation (Output Load min <-> max) 2% max. Line Regulation (VACin min <-> VACin max) 2% max. RACV30 Output Ripple 3% max. Operating Frequency 125kHz Isolation Voltage 3kVAC / 1 minute Operating Temperature Range Ambient Temperature -20C to +50C (free air convection) Case Temperature 75C max. Humidity 85% RH max. Case Material Epoxy UL94V-0 Weight RACV30-24 167g RACV30-12 170g MTBF MIL STD 217F 30x10 hours Note: Design Lifetime 70 x 10 hours max. All LED Drivers may not be used without a load. EMC Standards EN55015 They must be switched on the primary side only. FCC18A Noncompliance may damage the LED or reduce Certifications its lifetime. LED General Safety UL8750, cUL8750 ENEC EN61347-2-13:2006 EN61347-1:2008 PSE J61347-1(H20), J61347-2-13(H21), J55015(H20) Screw Terminal Specification 14AWG or 2.5mm Connector Plug Specification 5.5mm connector Short Circuit Protection Current Limit, Automatic Restart Overload Protection Full Load 110~160% Overtemperature Protection Tj=110C Automatic Restart Refer to Application Notes L-44 REV: 0/2015 www.recom-power.comRACV30 RACV30 LIGHTLINE AC/DC-Converter Series Characteristic Maximum Number of LED drivers per circuit breakers Condition Circuit Breaker Circuit Breaker Current Typ 10A 16A 20A 25A 115VAC, 1Ohm C 32 48 57 72 90 phase angle B 24 38 46 58 230VAC, 1Ohm 90 phase angle C 38 62 74 92 B 28 44 53 66 277VAC, 1Ohm 90 phase angle C 44 71 84 106 Package Style and Pinning +%+ (> ( / & % ** ( ( + , 5 : ( ( + Connections CN1 Function L VAC in (L) N VAC in (N) CN2 Function + LED+ - LED- - 5.5mm Socket* Function Pin LED+ Shell LED- Tolerance XX = +/-1mm XX.X = */-0.5mm The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOMs explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 0/2015 L-45