Thread Conversion Specialists Dual Certified Adaptors & Reducers IP66 68 & 4X 6P AD-U & RD-U Series Adaptors and Reducers provide a method of matching electrical threadforms on Ex Equipment while maintaining certification. Adaptors are used where the thread size of the cable gland or connection device is larger than, or of an equivalent size to the entry thread of the enclosure. Reducers are used to reduce the entry thread of an enclosure to accept a cable gland or connection device with a smaller thread. 316 Stainless Steel versions Worldwide compatibility keeping pace with the rapidly changing approvals and to ensure worldwide compatibility, Redapt have North American Ex approvals for both methods of hazardous location classification, Zones and Divisions, in addition to our existing CENELEC approvals. Redapt can therefore offer Adaptors & Reducers Ex de I&IIC and/or Class I Division 1 ABCD Captive O Ring Seal is located within a recess on the face of the product helping protect the O ring from the environmental damage, ensuring the O ring is not displaced during installation and to optimise ingress protection. Please Note: Tapered male thread options are not normally supplied c/w O ring seal, thread sealant should be used to maintain the desired level of ingress protection. If an O ring seal is required (Clearance holes) this can be available as an option. 316 Stainless Steel versions do not feature a marking band. This reduces the overall length of Reducers by 5mm, it does not affect the overall length of Adaptors. 1CENELEC CSA / A Ex Sira 00ATEX1094 (Metric Female) Class I, Zone 1, Ex de I&IIC Sira 99ATEX1115U (Non-Metric Female) Class I Division 1&2 ABCD I M2 II 2DG E Ex de I&IIC Class II EFG, Class III II 2DG E Ex de IIC (Aluminium) Ingress Protection: IP66 68, CSA Enclosure Type (NEMA) 4X 6P Impact Resistance: 20Nm (7Nm Aluminium) Ambient Temperature: 50 to +85C Materials: Brass, 316 Stainless Steel, Aluminium O Ring Material: Nitrile Plating: Nickel, Zinc, other on application Part Number: Please refer to Part Numbering System Adaptor Reducer Bore Male Thread Length Male Overall Thread Length Overall Length Female Length Thread Hex A/F Depth Hex A/C Please see pages 3 & 4 for dimension tables. Available thread sizes and corresponding bore size Metric Bore NPT Bore ISO Pipe Bore ET Bore PG Bore 3 5 M16 10.0 8 10.0 8 10.0 PG7 8.0 1 1 3 M20 14.0 2 15.0 2 15.0 4 14.0 PG9 10.0 3 3 M25 18.0 4 19.0 4 19.0 1 18.0 PG11 13.5 1 M32 24.0 1 25.0 1 25.0 1 4 24.0 PG13.5 14.0 1 1 1 M40 32.0 1 4 32.0 1 4 32.0 1 2 32.0 PG16 16.0 1 1 M50 41.0 1 2 38.0 1 2 38.0 2 41.0 PG21 21.0 1 M63 53.0 2 49.0 2 49.0 2 2 53.0 PG29 29.0 1 1 M75 64.0 2 2 60.0 2 2 60.0 3 64.0 PG36 38.0 M80x2.0 69.0 3 75.0 3 75.0 PG42 45.0 1 1 M85x2.0 73.0 3 2 88.0 3 2 88.0 PG48 50.0 M90x2.0 78.0 4 100.0 4 100.0 M100x2.0 88.0 For full material specifications and options please refer to Material Specifications. 2