7018TX Industrial Ethernet Switch N-Tron Networking Series Managed Industrial Ethernet Switch THEINDUSTRIALNETWORKCOMPANY The N-TRON 7018TX gigabit capable Industrial Ethernet Switch offers outstanding performance and ease of use. It is ideally suited for connecting Ethernet-enabled industrial and/or security equipment and is a fully managed switch. PRODUCT FEATURES Sixteen 10/100BaseTX RJ-45 Ports Two Optional SFP (Mini-GBIC) Gigabit Transceivers 1000BaseSX/LX Fiber with LC style connectors or 1000BaseT Copper with RJ-45 connectors o o -40 C to 70 C Operating temperature ESD and Surge Protection Diodes on all Ports Auto Sensing 10/100BaseTX, Duplex, and MDIX Rugged DIN-Rail Enclosure Shown with Optional Gigabit Redundant Power Inputs (10-30VDC) SFP Transceivers installed Con gurable Alarm Contact & Bi-Color Fault Status LED Fully Managed Features: Rapid Spanning Tree Protocol SNMP v1, v2, v3 and Web Browser Management RSTP allows the switch to be con gured in a ring or mesh topology, Detailed Ring Map and Fault Location Charting and provides support for redundant path communications with high N-Ring Technology with ~30ms Healing speed (rapid) healing. N-View OPC Monitoring N-Link Redundant N-Ring Coupling Remote Monitoring Options Plug-and-play IGMP Support For ease of con guration and monitoring, the 7018TX offers web 802.1Q tag VLAN and Port VLAN browser management and N-View OLE for process control (OPC) server 802.1p QoS and Port QoS software. The N-TRON N-View software can be combined with popular LLDP (Link Layer Discovery Protocol) HMI software packages to add network traf c monitoring, trending, EtherNet/IP CIP Messaging and alarming to any application using N-TRON switches. In addition SNMP is available for switch link and status monitoring. The alarm Trunking contact and status LED can be con gured to respond to power failure Port Mirroring on power input 1 or input 2, N-Link broken, partial break high, partial 802.1d, 802.1w, 802.1D RSTP break low, or if multiple ring managers are detected. DHCP Server, Option 82 relay, Option 61, IP Fallback Port SecurityMAC Address Based N-Ring Technology Management Features N-TRON s 7018TX ring manager using N-TRON s N-Ring technology offers expanded ring size capacity, detailed fault diagnostics, and a The 7018TX offers management functions that can be easily standard healing time of ~30ms. The 7018TX ring manager periodically con gured using a Web Browser: checks the health of the ring via packets. If the ring manager stops IGMP Snooping - Internet Group Management Protocol allows the receiving these health check packets, it converts the ring to a linear 7018TX switch to forward and lter multicast traf c intelligently. topology within ~30ms. When all switches in the ring are N-TRON VLAN - Virtual Local Area Network allows you to segment the switch fully managed switches, a detailed ring map and fault location chart in order to create two or more separate local area network domains. will also be provided on the ring managers web browser and OPC server to identfy the health status of the ring. N-Link allows the QoS - Quality of Service provides prioritization of network traf c linking of two N-Rings. Up to 250 fully managed N-TRON switches in order to provide better network service. The primary goal of QoS can participate in N-Ring topologies. is to improve the latency of prioritized Ethernet packets required for ring management, real-time, and other interactive applications. Industrial Packaging and Speci cations Port Trunking - Port Trunking (link aggregation) enables The 7018TX is designed to operate in industrial environments. It is multiple physical ports to be linked together and function as one housed in a rugged steel DIN-Rail enclosure. It has extended industrial uplink to another N-TRON trunking capable switch con gured in the speci cations and features to meet or exceed the operating parameters same manner, thereby increasing the bandwidth between switches. of connected equipment. These include extended temperature ratings, This con guration can provide increased bandwidth and redundancy extended shock and vibration specs, redundant power inputs, and high to applications requiring high levels of fault tolerant operation. MTBF (greater than 2M hours). Port Mirroring - This function allows the traf c on one port to Ease of Use be duplicated and sent to a designated mirror port. Port mirroring The 10/100BaseTX ports are auto sensing and auto con guring. Each can be used to monitor Ethernet traf c on the designated source copper port is automatically negotiated for maximum speed and port using the assigned mirror port. performance by default, but can also be hard coded through the user interface. The two optional gigabit ports support full 2000 Mb/s DHCP-DHCP Server / Client automates the assignment of IP addresses. DHCP Option 82 assures that if a device on a speci c communications via 1000BaseSX/LX/T. For added exibility, these port is replaced, the replacement receives the same IP address as SFP (Mini-GBIC) gigabit transceivers are eld upgradable or can be the original device. factory installed at the time of purchase.7018TX Specifications THEINDUSTRIALNETWORKCOMPANY 7018TX Speci cations SFP Gigabit Fiber Transceiver Characteristics Switch Properties 550m for 50/125m 10km** 40km** 80km** Number of MAC Addresses: 8,000 Fiber Length 275m for 62.5/125m* Aging Time: Programmable TX Power Min -9.5dBm -9.5dBm -2dBm 0dBm Latency Typical: 2.6 s RX Sensitivity Max -17dBm -20dBm -22dBm -24dBm Wavelength 850nm 1310nm 1310nm 1550nm Switching Method: Store-and-Forward 3.5 to 3.75 dB/km 0.45 dB/km 0.35 dB/km 0.25 dB/km Assumed Fiber Loss Laser Type VCSEL FP DFB DFB Case Dimensions * SX Fiber Optic Cable Height: 2.3 (5.8 cm) ** LX Fiber Optic Cable Width: 8.3 (21.0 cm) Depth: 4.8 (12.1 cm) Connectors Weight (max): 3.3 lbs (1.5 kg) 10/100BaseTX: Sixteen (16) RJ-45 Copper Ports DIN-Rail Mount: 35mm Optional SFP Ports: 1000BaseT: Up to Two (2) RJ-45 Gigabit Electrical Copper Ports (optional) Redundant Input Voltage: 10-30 VDC (Regulated) 1000BaseSX: Up to Two (2) LC Duplex Gigabit Input Current (max): 520mA max. 24VDC Fiber Ports (optional) BTU/hr: 42.6 24VDC N-TRON Power Supply: NTPS-24-1.3 (1.3A 24V) Recommended Wiring Clearance Front: 4 (10.16 cm) Environmental Side: 1 (2.54 cm) o o Operating Temperature: -40 C to 70 C o o Storage Temperature: -40 C to 85 C Regulatory Approvals Operating Humidity: 5% to 95% FCC Title 47, Part 15, Subpart B - Class A ICES-003 - Class A (Non Condensing) UL Listed (US and Canada) 1604 ANSI/ISA-12.12.01-2007 Operating Altitude: 0 to 10,000 ft. Class I, Div 2, Groups A, B, C, D, and T4A CE: EN61000-6-2:2001: EN61000-4-2, 3, 4, 5, 6 Shock and Vibration (bulkhead mounted) EN55011:1998+A1:1999+A2:2002-Class A Shock: 200g 10ms EN50155 for Railway Applications Vibration/Seismic: 50g, 5-200Hz, Triaxial GOST-R Certi ed, RoHS Compliant Designed to comply with: Reliability MTBF: >2 Million Hours IEEE 1613 for Electric Utility Substations NEMA TS1/ TS2 for Traf c control Network Media 10BaseT: >Cat3 Cable 100BaseTX: >Cat5 Cable 1000BaseT: >Cat5e Cable 1000BaseSX Multimode: 50-62.5/125 m 1000BaseLX Singlemode: 7-10/125 m Contact Information N-TRON Corp. N-TRON Asia N-TRON Europe GmbH 820 S. University Blvd., Suite 4E Suite : 2267, 22/F, One Lujiazui Alte Steinhauserstr 19 Mobile, AL 36609 USA 68 Yin Cheng Road Center, 6330 Cham / Zg Switzerland TEL: (251) 342-2164 Pudong New Area TEL: +41 41 7406636 FAX: (251) 342-6353 200120 Shanghai, P.R. China FAX: +41 41 7406637 Website: www.N-TRON.com Phone: +86 (0) 21 6194 6777 Email: N-TRON info N-TRON.com Fax: +86 (0) 21 6194 6699 REV 100628 2010 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identi cation purposes only and may be trademarks and/or registered trademarks of their respective company. Speci cations subject to change without notice. The responsibility for the use and application of N-TRON products rests with the end user. N-TRON makes no warranties as to the tness or suitability of any N-TRON product for any speci c application. N-TRON Corporation shall not be liable for any damage resulting from the installation, use, or misuse of this product. Printed in USA.