COMXpress Stratix 10 SoC 32 PCI Express lanes Intel Stratix 10 SX Artificial Intelligence 2800 KLE 4x DDR4 up to 56GBytes total High Performance COM Express Basic form IO and Transceiver Computing extension connector factor module, Type 7Full Specifications FPGA Stratix 10 SX with ARMV8 (Integrated quad-core 64 bit C ommunication Ethernet 10/100/1000 Base-T (HPS) Configuration Interfaces ARM CortexA53 hard processor system up to 1.5 GHz 4x 10GbE base KR (default) embedded) 2x Serial SATA revision 3.0, 6Gb/s MAX 10 CPLD with board management control 4x XCVR lane connected to extension connector (Display JTAG connector for external USB cable Port/SDI capable) eMMC 32GBytes (HPS) / with U-boot, Linux kernel & 3x USB2.0 HOST 1x USB3.0 1x SMB,IC,UART Rootfs 8 GPIOs (4 FPGA + 4 HPS) Nor Flash for quad SPI (x4) FPGA configuration mode 2x PCI Express x16 (Gen 1, 2 or 3) end-point supported eSPI interface multiplexed over Intel Low Pin Count (LPC) 4 memory banks on board DDR4: Memory Interface Total 56GB + EC Network Controller Sideband Interface (NC-SI) supported (and optional) Power +12V primary power supply input, 120W max +5V standby and 3.3V RTC power supply inputs Extension connector : Interfaces (4x transceivers Rx/Tx and Other 4x LVDS interface) Operating Resources 0C to 40C Range Programmable PLL (Si5341), output clocks frequency Storage 0.0001MHz to 750MHz 0C to 70C Temp Range High precision on board oscillator, clock accuracy 20MHz- 0.05ppm for Precision Time Protocol (PTP) IEEE 1588 Board Length : 125mm (4.92inches) Width :95mm (3.74 inches) Dimensions Height (without heatsink) : SDK & Toolkit The REFLEX CES Toolkit is provided with every board purchased, 11.91mm (with 5mm Standoffs) to be a link between the REFLEX CES board and the host system. It is a suite of software development tools, including drivers, 14.91mm (with 8mm Standoffs) libraries, utilities and example projects. Board FPGA monitoring Management RoHS/REACH compliant Standards and NOR Flash and clock programming Controller Compliance UL certified ISO9001 certified Deliverables Stratix 10 SX COMe Basic module type 7 Kernel Linux support, U-boot bootloader and comprehensive user documentation Delivered with a custom heatsink JTAG adapter cable for external USB blaster probe. Board Support Package (Reference Manual, Design Carrier Guideline, Evaluation PCIe Carrier Board available (upon request) HDL reference designs, Connectors to FPGA pin assignments) Online support at support.reflexces.com 3D Mechanical files (under request) Ordering information Version Part number Comments Turbo version COMXpressSXS10L-2800T Intel Stratix 10 SoC (1SX280LN3F43E2VG) / 2800 KLE FPGA On-board 56GB DDR4 + ECC 3x banks 16GB + ECC, x72bit 2400MT/s (FPGA) + 1x bank 8GB + ECC, x72bit 2133MT/s (used by HPS), 2400MT/s (used by FPGA) REFLEX CES 2019-All Rights Reserved Sept/v4.7 Europe Sales Office / sales reflexces.com North America Sales Office / salesusa reflexces.com www.reflexces.com