74ALVCH16245PAG Renesas

IDT74ALVCH16245 3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE 3.3V CMOS 16-BIT BUS IDT74ALVCH16245 TRANSCEIVER WITH 3-STATE OUTPUTS AND BUS-HOLD FEATURES: DESCRIPTION: 0.5 MICRON CMOS Technology This 16-bit bus transceiver is built using advanced dual metal CMOS Typical tSK(o) (Output Skew) < 250ps technology. The ALVCH16245 is designed for asynchronous communication ESD > 2000V per MIL-STD-883, Method 3015 > 200V using between data buses. The control-function implementation minimizes external machine model (C = 200pF, R = 0) timing requirements. VCC = 3.3V 0.3V, Normal Range This device can be used as two 8-bit transceivers or one 16-bit transceiver. VCC = 2.7V to 3.6V, Extended Range It allows data transmission from the A bus to the B bus or from the B bus to the VCC = 2.5V 0.2V A bus, depending on the logic level at the direction-control (DIR) input. The CMOS power levels (0.4 W typ. static) output-enable (OE) input can be used to disable the device so that the buses Rail-to-Rail output swing for increased noise margin are effectively isolated. Available in TSSOP package The ALVCH16245 has been designed with a 24mA output driver. This driver is capable of driving a moderate to heavy load while maintaining speed DRIVE FEATURES: performance. High Output Drivers: 24mA The ALVCH16245 has bus-hold which retains the inputs last state Suitable for heavy loads whenever the input bus goes to a high impedance. This prevents floating inputs and eliminates the need for pull-up/down resistors. APPLICATIONS: 3.3V high speed systems 3.3V and lower voltage computing systems FUNCTIONAL BLOCK DIAGRAM 1 24 1DIR 2DIR 48 25 2OE 1OE 47 36 1A1 2A1 2 13 1B1 2B1 46 35 1A2 2A2 3 14 1B2 2B2 44 33 1A3 2A3 5 16 1B3 2B3 43 32 1A4 2A4 6 17 1B4 2B4 41 30 1A5 2A5 8 19 1B5 2B5 40 29 1A6 2A6 9 20 1B6 2B6 38 27 1A7 2A7 11 22 1B7 2B7 37 26 1A8 2A8 12 23 1B8 2B8 IDT and the IDT logo are registered trademarks of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE AUGUST 2016 1 2016 Integrated Device Technology, Inc. DSC-4697/6IDT74ALVCH16245 3.3V CMOS 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE (1) PIN CONFIGURATION ABSOLUTE MAXIMUM RATINGS Symbol Description Max Unit (2) VTERM Terminal Voltage with Respect to GND 0.5 to +4.6 V (3) VTERM Terminal Voltage with Respect to GND 0.5 to VCC+0.5 V 1DIR 1 48 1OE TSTG Storage Temperature 65 to +150 C 2 1B1 47 1A1 IOUT DC Output Current 50 to +50 mA 3 1B2 46 IIK Continuous Clamp Current, 50 mA 1A2 VI < 0 or VI > VCC 4 45 GND GND IOK Continuous Clamp Current, VO < 0 50 mA 5 1B3 44 1A3 ICC Continuous Current through each 100 mA ISS VCC or GND 6 1B4 1A4 43 NOTES: 7 42 VCC 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause VCC permanent damage to the device. This is a stress rating only and functional operation 8 1B5 41 1A5 of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating 9 40 1B6 1A6 conditions for extended periods may affect reliability. 2. VCC terminals. 10 GND 39 GND 3. All terminals except VCC. 11 1B7 38 1A7 12 1B8 37 1A8 CAPACITANCE (TA = +25C, F = 1.0MHz) (1) 13 2B1 36 Symbol Parameter Conditions Typ. Max. Unit 2A1 CIN Input Capacitance VIN = 0V 5 7 pF 14 2B2 35 2A2 COUT Output Capacitance VOUT = 0V 7 9 pF 15 34 GND GND CI/O I/O Port Capacitance VIN = 0V 7 9 pF 16 2B3 33 2A3 NOTE: 1. As applicable to the device type. 17 2B4 32 2A4 18 VCC 31 VCC PIN DESCRIPTION 30 19 2B5 2A5 Pin Names Description 20 29 2B6 2A6 xOE Output Enable Inputs (Active LOW) 21 GND 28 DIR Direction Control Inputs GND (1) 22 x Ax Side A Inputs or 3-State Outputs 2B7 27 2A7 (1) 23 xBx Side B Inputs or 3-State Outputs 2B8 26 2A8 NOTE: 24 25 2DIR 2OE 1. These pins haveBus-Hol. All other pins are standard inputs, outputs, or I/Os. TSSOP TOP VIEW (1) FUNCTION TABLE (EACH 8-BIT SECTION) Inputs xOE xDIR Outputs L L Bus B Data to Bus A L H Bus A Data to Bus B H X High Z state NOTE: 1. H = HIGH Voltage Level L = LOW Voltage Level X = Dont Care 2