DATASHEET DG411, DG412, DG413 FN3282 Rev 13.00 Monolithic Quad SPST, CMOS Analog Switches June 20, 2007 The DG411 series monolithic CMOS analog switches are Features drop-in replacements for the popular DG211 and DG212 ON-Resistance (Max) . 35 series devices. They include four independent single pole throw (SPST) analog switches, and TTL and CMOS Low Power Consumption (P ) <35W D compatible digital inputs. Fast Switching Action These switches feature lower analog ON-resistance (<35 ) -t (Max) 175ns ON and faster switch time (t <175ns) compared to the DG211 ON -t (Max) . 145ns OFF or DG212. Charge injection has been reduced, simplifying Low Charge Injection sample and hold applications. Upgrade from DG211, DG212 The improvements in the DG411 series are made possible by using a high voltage silicon-gate process. An epitaxial TTL, CMOS Compatible layer prevents the latch-up associated with older CMOS Single or Split Supply Operation technologies. The 44V maximum voltage range permits Pb-Free Plus Anneal Available (RoHS Compliant) controlling 40V signals. Power supplies may be P-P single-ended from +5V to 44V, or split from 5V to 20V. Applications The four switches are bilateral, equally matched for AC or Audio Switching bidirectional signals. The ON-resistance variation with analog signals is quite low over a 15V analog input range. The Battery Operated Systems switches in the DG411 and DG412 are identical, differing only Data Acquisition in the polarity of the selection logic. Two of the switches in the DG413 ( 2 and 3) use the logic of the DG211 and DG411 Hi-Rel Systems (i.e., a logic 0 turns the switch ON) and the other two Sample and Hold Circuits switches use DG212 and DG412 positive logic. This permits Communication Systems independent control of turn-on and turn-off times for SPDT configurations, permitting break-before-make or make- Automatic Test Equipment before-break operation with a minimum of external logic. FN3282 Rev 13.00 Page 1 of 13 June 20, 2007DG411, DG412, DG413 Ordering Information PART NUMBER PART MARKING TEMP. RANGE (C) PACKAGE PKG. DWG. DG411DJ DG411DJ -40 to +85 16 Ld PDIP E16.3 DG411DJZ (Note) DG411DJZ -40 to +85 16 Ld PDIP** (Pb-free) E16.3 DG411DY* DG411DY -40 to +85 16 Ld SOIC (150 mil) M16.15 DG411DYZ* (Note) DG411DYZ -40 to +85 16 Ld SOIC (150 mil) (Pb-free) M16.15 DG411DVZ* (Note) DG411 DVZ -40 to +85 16 Ld TSSOP (4.4mm) (Pb-free) M16.173 DG412DJ DG412DJ -40 to +85 16 Ld PDIP E16.3 DG412DJZ (Note) DG412DJZ -40 to +85 16 Ld PDIP** (Pb-free) E16.3 DG412DY* DG412DY -40 to +85 16 Ld SOIC (150 mil) M16.15 DG412DYZ* (Note) DG412DYZ -40 to +85 16 Ld SOIC (150 mil) (Pb-free) M16.15 DG412DVZ* (Note) DG412 DVZ -40 to +85 16 Ld TSSOP (4.4mm) (Pb-free) M16.173 DG413DJ DG413DJ -40 to +85 16 Ld PDIP E16.3 DG413DJZ (Note) DG413DJZ -40 to +85 16 Ld PDIP** (Pb-free) E16.3 DG413DY* DG413DY -40 to +85 16 Ld SOIC (150 mil) M16.15 DG413DYZ* (Note) DG413DYZ -40 to +85 16 Ld SOIC (150 mil) (Pb-free) M16.15 DG413DVZ* (Note) DG413 DVZ -40 to +85 16 Ld TSSOP (4.4mm) (Pb-free) M16.173 *Add -T suffix for tape and reel. **Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications. NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. Pin Descriptions TRUTH TABLE PIN SYMBOL DESCRIPTION DG411 DG412 DG413 1IN Logic Control for Switch 1. 1 SWITCH SWITCH 2D Drain (Output) Terminal for Switch 1. 1 LOGIC SWITCH SWITCH 1, 4 2, 3 3S Source (Input) Terminal for Switch 1. 1 0On Off Off On 4 V- Negative Power Supply Terminal. 1 Off On On Off 5 GND Ground Terminal (Logic Common). 6S Source (Input) Terminal for Switch 4. 4 NOTE: Logic 0 0.8V. Logic 1 2.4V. 7D Drain (Output) Terminal for Switch 4. 4 8IN Logic Control for Switch 4. 4 Pinout 9IN Logic Control for Switch 3. 3 DG411, DG412, DG413 10 D Drain (Output) Terminal for Switch 3. 3 (16 LD PDIP, SOIC, TSSOP) 11 S Source (Input) Terminal for Switch 3. 3 TOP VIEW 12 V Logic Reference Voltage. L IN 1 16 IN 1 2 13 V+ Positive Power Supply Terminal (Substrate). D 2 15 D 1 2 14 S Source (Input) Terminal for Switch 2. 2 14 S S 3 15 D Drain (Output) Terminal for Switch 2. 1 2 2 13 V+ 16 IN Logic Control for Switch 2. V- 4 2 GND 5 12 V L S 6 11 S 4 3 10 D D 7 4 3 9 IN IN 8 4 3 FN3282 Rev 13.00 Page 2 of 13 June 20, 2007