DATASHEET EL5111, EL5211, EL5411 FN7119 Rev 8.00 60MHz Rail-to-Rail Input-Output Op Amps August 27, 2015 The EL5111, EL5211, and EL5411 are low power, high Features voltage rail-to-rail input-output amplifiers. The EL5111 Pb-free plus anneal available (RoHS compliant) represents a single amplifier, the EL5211 contains two amplifiers, and the EL5411 contains four amplifiers. 60MHz (-3dB) bandwidth Operating on supplies ranging from 5V to 15V, while Supply voltage = 4.5V to 16.5V consuming only 2.5mA per amplifier, the EL5111, EL5211, Low supply current (per amplifier) = 2.5mA and EL5411 have a bandwidth of 60MHz (-3dB). They also provide common mode input ability beyond the supply rails, High slew rate = 75V/s as well as rail-to-rail output capability. This enables these Unity-gain stable amplifiers to offer maximum dynamic range at any supply voltage. Beyond the rails input capability The EL5111, EL5211, and EL5411 also feature fast slewing Rail-to-rail output swing and settling times, as well as a high output drive capability of 180mA output short current 65mA (sink and source). These features make these amplifiers ideal for high speed filtering and signal Applications conditioning application. Other applications include battery TFT-LCD panels power, portable devices, and anywhere low power consumption is important. V amplifiers COM The EL5111 is available in 5 Ld TSOT and 8 Ld HMSOP Drivers for A/D converters packages. The EL5211 is available in the 8 Ld HMSOP Data acquisition package. The EL5411 is available in space-saving 14 Ld HTSSOP packages. All feature a standard operational Video processing amplifier pinout. These amplifiers operate over a temperature Audio processing range of -40C to +85C. Active filters Test equipment Battery-powered applications Portable equipment Pinouts EL5111 EL5111 EL5211 EL5411 (8 LD HMSOP) (5 LD TSOT) (8 LD HMSOP) (14 LD HTSSOP) TOP VIEW TOP VIEW TOP VIEW TOP VIEW NC 1 8 NC VOUT 1 5 VS+ VOUTA 1 8 VS+ VOUTA 1 14 VOUTD VIN- 2 7 VS+ VS- 2 VINA- 2 - 7 VOUTB VINA- 2 13 VIND- - + - + - - + VIN+ 3 6 VOUT VIN+ 3 4 VIN- VINA+ 3 - 6 VINB- VINA+ 3 + + 12 VIND+ + VS- 4 5 NC VS- 4 5 VINB+ VS+ 4 11 VS- VINB+ 5 10 VINC+ + + VINB- 6 - - 9 VINC- VOUTB 7 8 VOUTC FN7119 Rev 8.00 Page 1 of 19 August 27, 2015 NO LONGER AVAILABLE OR SUPPORTED NO LONGER AVAILABLE OR SUPPORTED NO LONGER AVAILABLE OR SUPPORTEDEL5111, EL5211, EL5411 Ordering Information PART NUMBER PART MARKING TAPE & REEL PACKAGE PKG. DWG. EL5111IWTZ-T7 (Note) BAAG 7 (3k pcs) 5 Ld TSOT (Pb-free) MDP0049 EL5111IWTZ-T7A (Note) BAAG 7 (250 pcs) 5 Ld TSOT (Pb-free) MDP0049 EL5111IYEZ (Note) (No longer available BAAJA - 8 Ld HMSOP (Pb-free) (3.0mm) MDP0050 or supported) EL5111IYEZ-T7 (Note) (No longer BAAJA 7 8 Ld HMSOP (Pb-free) (3.0mm) MDP0050 available or supported) EL5111IYEZ-T13 (Note) (No longer BAAJA 13 8 Ld HMSOP (Pb-free) (3.0mm) MDP0050 available or supported) EL5211IYEZ (Note) (No longer available BAATA - 8 Ld HMSOP (Pb-free) (3.0mm) MDP0050 or supported) EL5211IYEZ-T7 (Note) (No longer BAATA 7 8 Ld HMSOP (Pb-free) (3.0mm) MDP0050 available or supported) EL5211IYEZ-T13 (Note) (No longer BAATA 13 8 Ld HMSOP (Pb-free) (3.0mm) MDP0050 available or supported) EL5411IREZ (Note) (No longer available 5411IREZ - 14 Ld HTSSOP (Pb-free) (4.4mm) MDP0048 or supported) EL5411IREZ-T7 (Note) (No longer 5411IREZ 7 14 Ld HTSSOP (Pb-free) (4.4mm) MDP0048 available or supported) EL5411IREZ-T13 (Note) (No longer 5411IREZ 13 14 Ld HTSSOP (Pb-free) (4.4mm) MDP0048 available or supported) EL5411IRZ (Note) (No longer available or 5411IRZ - 14 Ld TSSOP (Pb-free) (4.4mm) M14.173 supported) EL5411IRZ-T7 (Note) (No longer 5411IRZ 7 14 Ld TSSOP (Pb-free) (4.4mm) M14.173 available or supported) EL5411IRZ-T13 (Note) (No longer 5411IRZ 13 14 Ld TSSOP (Pb-free) (4.4mm) M14.173 available or supported) NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. FN7119 Rev 8.00 Page 2 of 19 August 27, 2015