Dual SPDT CMOS Analog Switch HI-5051/883 Features This CMOS analog switch offers low resistance switching This Circuit is Processed in Accordance to MIL-STD-883 and performance for analog voltages up to the supply rails and for is Fully Conformant Under the Provisions of Paragraph 1.2.1. signal currents up to 70mA. ON resistance is low and stays Wide Analog Signal Range . . . . . . . . . . . . . . . . . . . . . . . . 15V reasonably constant over the full range of operating signal Low ON Resistance . . . . . . . . . . . . . . . 25 (Typ), 50 (Max) voltage and current. R remains exceptionally constant for ON input voltages between +5V and -5V and currents up to 50mA. High Current Capability . . . . . . . . . . . . . . . . . . . . . 70mA (Max) Switch impedance also changes very little over temperature, Break-Before-Make Switching particularly between 0C and +75C. R is nominally 25. ON - Turn-On Time. . . . . . . . . . . . . . . . .370ns (Typ), 800ns (Max) The HI-5051/883 provides break-before-make switching and - Turn-Off Time . . . . . . . . . . . . . . . 280ns (Typ), 400ns (Max) is TTL and CMOS compatible for maximum application No Latch-Up versatility. Performance is further enhanced by Dielectric Input MOS Gates are Protected from Electrostatic Discharge Isolation processing which insures latch-free operation with very low input and output leakage currents (0.8nA at +25C). DTL, TTL, CMOS, PMOS Compatible The HI-5051/883 switch also features very low power operation (1.5mW at +25C). The HI-5051/883 is available in a Applications 20 Ld CLCC package and operates over the -55C to +125C High Frequency Switching temperature range. Sample and Hold Digital Filters Operational Amplifier Gain Switching Functional Diagram Pin Configuration LOGIC 1 INPUT HI-5051/883 V V+ 20 LD CLCC L TOP VIEW 12 11 LOGIC 0 INPUT 16 1 S D 1 1 4 3 NC D NC S A 1 1 1 S D 3 3 15 2 20 3 1 19 A 1 10 D 4 18 V- A 3 2 9 8 S D 2 2 5 17 V S R 3 5 6 S D 4 4 6 16 NC NC 13 14 S 7 15 V L 4 V V- R D 8 14 V+ 4 9 10 12 13 11 TYPICAL SWITCH NC D NC S A 2 2 2 S NOTE: Unused pins may be internally connected. Ground all unused pins. A N P Ordering Information PKG. D PART PART TEMP. RANGE DWG. NUMBER MARKING (C) PACKAGE HI4-5051/883 HI4-5051 883 -55 to +125 20 Ld CLCC J20.A NOTE: Source and Drain are arbitrarily depicted as Analog Input and Output, respectively. They may be interchanged without affecting performance. May 3, 2012 CAUTION: These devices are sensitive to electrostatic discharge follow proper IC Handling Procedures. 1 1-888-INTERSIL or 1-888-468-3774 Copyright Intersil Americas Inc. 1989, 2012. All Rights Reserved FN8289.0 Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries. All other trademarks mentioned are the property of their respective owners.HI-5051/883 Absolute Maximum Ratings Thermal Information Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . 36V Thermal Resistance (C/W) (C/W) JA JC V to Ground (V+, V-) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18V CLCC Package. . . . . . . . . . . . . . . . . . . . . . . . 8O 20 SUPPLY V to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -V Package Power Dissipation at +75C R SUPPLY V to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +V CLCC Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0W L SUPPLY Digital and Analog Input Voltage (V , V , V ) . . . . . . . . . . . . +V +4V Package Power Dissipation Derating Factor above +75C A S D SUPPLY -V -4V CLCC Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12.5mW/C SUPPLY Peak Current (Source to Drain) Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+175C (Pulse at 1ms, 10% Duty Cycle Max) . . . . . . . . . . . . . . . . . . . . . . . . 70mA Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . .-65C to +150C Continuous Current (Any Pin) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA Lead Temperature (Soldering 10s). . . . . . . . . . . . . . . . . . . . . . . . . . .+300C ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<2000V Recommended Operating Conditions Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . .-55C to +125C Operating Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15V Logic Supply Voltage (V ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5.0V L Logic Reference Voltage (V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.0V R Analog Input Voltage (V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V S SUPPLY Address Low Level (V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0V to 0.8V AL Address High Level (V ). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4V to +5.0V AH CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty. TABLE 1. D.C. ELECTRICAL PERFORMANCE SPECIFICATIONS Device Tested at: Supply Voltage = 15V, V = +5.0V, V = 0.0V, V = 2.4V, V = +0.8V, unused pins are grounded, unless otherwise specified. L R AH AL GROUP A TEMPERATURE D.C. PARAMETERS SYMBOL CONDITIONS SUBGROUPS (C) MIN MAX UNITS Switch ON Resistance R V = -10V, I = 10mA 1 +25 - 45 DS2 D S S1/S2/S3/S4 2, 3 -55 to +125 - 50 V = 10V, I = -10mA 1 +25 - 45 D S S1/S2/S3/S4 2, 3 -55 to +125 - 50 Source OFF I V = -10V, V = 10V 1 +25 -1 1 nA S(OFF) S D Leakage Current S1/S2/S3/S4 2, 3 -55 to +125 -100 100 nA V = 10V, V = -10V 1 +25 -1 1 nA S D S1/S2/S3/S4 2, 3 -55 to +125 -100 100 nA Drain OFF I V = -10V, V = 10V 1 +25 -1 1 nA D(OFF) D S Leakage Current S1/S2/S3/S4 2, 3 -55 to +125 -100 100 nA V = 10V, V = -10V 1 +25 -1 1 nA D S S1/S2/S3/S4 2, 3 -55 to +125 -100 100 nA Channel ON I V = V = 10V 1 +25 -2 2 nA D(ON) D S Leakage Current S1/S2/S3/S4 2, 3 -55 to +125 -200 200 nA V = V = -10V 1 +25 -2 2 nA D S S1/S2/S3/S4 2, 3 -55 to +125 -200 200 nA Low Level Address Current I V = 0V 1 +25 -1 1 A AL A A , A 1 2 2, 3 -55 to +125 -10 1 A High Level Address Current I V = 2.4V, 5V 1 +25 -1 1 A AH A A , A 1 2 2, 3 -55 to +125 -1 10 A Positive Supply Current +I V = 0V, 5V 1 +25 - 200 A CC A A , A 1 2 2, 3 -55 to +125 - 300 A Negative Supply Current -I V = 0V, 5V 1 +25 -200 - A CC A A , A 1 2 2, 3 -55 to +125 -300 - A FN8289.0 2 May 3, 2012