QS34XVH245Q3G Renesas

IDTQS34XVH245 INDUSTRIAL TEMPERATURE RANGE 2.5V / 3.3V 32-BIT HIGH BANDWIDTH BUS SWITCH QUICKSWITCH PRODUCTS IDTQS34XVH245 2.5V / 3.3V 32-BIT HIGH BANDWIDTH BUS SWITCH FEATURES: DESCRIPTION: N channel FET switches with no parasitic diode to VCC The QS34XVH245 HotSwitch is a high bandwidth 32-bit bus switch. The Isolation under power-off conditions QS34XVH245 has very low ON resistance, resulting in under 250ps No DC path to VCC or GND propagation delay through the switch. The switches can be turned ON 5V tolerant in OFF and ON state under the control of individual LVTTL-compatible Output Enable (OEx) 5V tolerant I/Os signals for bidirectional data flow with no added delay or ground bounce. In Low RON , 4 typical the ON state, the switches can pass up to 5V. In the OFF state, the switches Flat RON characteristics over operating range offer very high impedence at the terminals. Rail-to-rail switching 0 - 5V The combination of near-zero propagation delay, high OFF impedance, Bidirectional dataflow with near-zero delay: no added ground and over-voltage tolerance makes the QS34XVH245 ideal for high perfor- bounce mance communications applications. Excellent RON matching between channels The QS34XVH245 is characterized for operation from -40C to +85C. VCC operation: 2.3V to 3.6V High bandwidth - up to 500MHz LVTTL-compatible control Inputs Undershoot Clamp Diodes on all switch and control Inputs Low I/O capacitance, 4pF typical Available in 80-pin QVSOP package APPLICATIONS: Hot-swapping 10/100 Base-T, Ethernet LAN switch Low distortion analog switch Replaces mechanical relay ATM 25/155 switching FUNCTIONAL BLOCK DIAGRAM A0 A1 A2 A3 A4 A5 A6 A7 A1 A17 A18 A19 A20 A21 A22 A23 6 OE1 OE3 B1 B17 B18 B19 B20 B21 B22 B23 B0 B1 B2 B3 B4 B5 B6 B7 6 A8 A9 A10 A11 A12 A13 A14 A15 A2 A25 A26 A27 A28 A29 A30 A31 4 OE2 OE4 B24 B25 B26 B27 B28 B29 B30 B31 B8 B9 B10 B11 B12 B13 B14 B15 The IDT logo is a registered trademark of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE JANUARY 2013 1 c 2013 Integrated Device Technology, Inc. DSC-5593/13IDTQS34XVH245 2.5V / 3.3V 32-BIT HIGH BANDWIDTH BUS SWITCH INDUSTRIAL TEMPERATURE RANGE (1) ABSOLUTE MAXIMUM RATINGS PIN CONFIGURATION Symbol Description Max Unit (2) VTERM SupplyVoltage to Ground 0.5 to +4.6 V (3) 1 NC VTERM DC Switch Voltage VS 0.5 to +5.5 V 80 Vcc (3) 2 VTERM DC Input Voltage VIN 0.5 to +5.5 V A0 79 OE1 VAC AC Input Voltage (pulse width 20ns) 3 V 3 A1 78 B0 IOUT DC Output Current (max. sink current/pin) 120 mA 4 A2 77 B1 TSTG Storage Temperature 65 to +150 C 5 A3 B2 76 NOTES: 6 A4 B3 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause 75 permanent damage to the device. This is a stress rating only and functional operation of 7 A5 B4 74 the device at these or any other conditions above those indicated in the operational 8 A6 sections of this specification is not implied. Exposure to absolute maximum rating 73 B5 conditions for extended periods may affect reliability. 9 A7 B6 72 2. VCC terminals. 10 3. All terminals except VCC . GND B7 71 NC 11 Vcc 70 12 A8 OE2 69 13 A9 B8 68 CAPACITANCE (TA = +25C, F = 1MHz, VIN = 0V, VOUT = 14 A10 B9 67 (1) 0V)Symbol Parameter Typ. Max. Unit 15 A11 B10 66 CIN Control Inputs 3 5 pF 16 A12 B11 65 CI/O Quickswitch Channels (Switch OFF) 4 6 pF 17 A13 B12 64 CI/O Quickswitch Channels (Switch ON) 8 12 pF 18 A14 B13 63 NOTE: 1. This parameter is guaranteed but not production tested. 19 A15 62 B14 GND 20 61 B15 NC 21 Vcc 60 A16 22 OE3 59 PIN DESCRIPTION A17 23 B16 58 A18 24 Pin Names I/O Description 57 B17 OEx I Output Enable A19 25 56 B18 Ax I/O Bus A 26 A20 B19 55 Bx I/O Bus B 27 A21 B20 54 28 A22 B21 53 29 A23 B22 52 30 GND B23 (1) 51 FUNCTION TABLE NC 31 50 Vcc OEx Function 32 A24 49 OE4 H Disconnected 33 A25 48 B24 L Connect (Ax = Bx) A26 34 47 B25 NOTE: 35 A27 46 B26 1. H = HIGH Voltage Level 36 A28 L = LOW Voltage Level 45 B27 A29 37 44 B28 38 A30 43 B29 39 A31 B30 42 40 GND B31 41 QVSOP TOP VIEW 2