ZWIR4532 Evaluation Kit User Manual Description Features The ZWIR4532 Development Kit is a set of three circuit boards IDT SensorShare firmware libraries and example programs intended as an evaluation and application development platform for License-free 868/915 MHz frequency bands the ZWIR4532 6LoWPAN module. Each Development Board IPv6 module addressing provides an USB interface and an optional single Ethernet interface 4 channels in EU mode 10 channels in US mode to connect with the user s PC. The USB is used as a virtual COM Over-the-air update (OTAU) functionality port and provides the power supply for JTAG programming and debugging. The Ethernet interface is provided to easily integrate Mesh connectivity the 6LoWPAN network into existing network infrastructure. Push HS3001 Humidity and Temperature Sensor with I2C interface buttons and LEDs are available as an on-board user interface. The in the Sensor Cube application circuitry can be easily prototyped. RH accuracy: 1.5% RH typical (10% to 90% RH, 25C) The Development Kit provides firmware libraries and example Fast RH response time (typical: 6 seconds) programs. Firmware libraries include an operating system, IDT s Temperature sensor accuracy: 0.2C (typ.) at -10C to mesh-routing-enabled 6LoWPAN stack, IP-Security (IPSec) and +80C Internet Key Exchange version 2 (IKEv2) protocol support, as well as support for over-the-air (OTA) updates and different peripheral Related datasheets are available online: libraries. Ethernet gateway firmware is provided with the kit, ZWIR4532: www.idt.com/ZWIR4532 allowing transparent integration of sensor networks into existing HS3001: www.idt.com/HS3001 Ethernet networks. ENC28J60H Ethernet Adapter ZWIR4532 Evaluation Kit User Manual Important Notes Disclaimer Integrated Device Technology, Inc. and its affiliated companies (herein referred to as IDT) shall not be liable for any damages arising out of defects resulting from (i) delivered hardware or software (ii) non-observance of instructions contained in this manual and in any other documentation provided to user, or (iii) misuse, abuse, use under abnormal conditions, or alteration by anyone other than IDT. TO THE EXTENT PERMITTED BY LAW, IDT HEREBY EXPRESSLY DISCLAIMS AND USER EXPRESSLY WAIVES ANY AND ALL WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, STATUTORY WARRANTY OF NON-INFRINGEMENT, AND ANY OTHER WARRANTY THAT MAY ARISE BY REASON OF USAGE OF TRADE, CUSTOM, OR COURSE OF DEALING. Restrictions in Use IDTs SDAWIR03 Demonstration Kit, consisting of the 6LoWPAN-WiFi Hub, Sensor Cube(s), AC/DC Wall Mount Adapters, Hose USB and HDMI adapters, and the IDT Demo Software, are designed to provide a quick setup for taking Flow, RH%, and temperature measurements with the FS2012 and HS3001 only. IDTs SDAWIR03 Demonstration Kits and IDT Demo Software must not be used for any mission-critical applications, end-customer products, or measurement reference source. Important Safety Warning: These procedures can result in high currents, which can cause severe injury or death and/or equipment damage. Only trained professional staff should connect external equipment and operate the software. Important Equipment Warning: Ensure the correct connection of all cables. Supplying the board using the wrong polarity could result in damage to the board and/or the equipment. Check that all jumpers have been removed from the board before applying power. Contents 1. ZWIR4532 Evaluation Kit Components ........................................................................................................................................................4 2. Setup ............................................................................................................................................................................................................5 2.1 Computer Requirements .....................................................................................................................................................................5 2.2 Setting the Evaluation Kit to Interface the Computer ...........................................................................................................................5 2.3 Evaluation Kit Board Connections .......................................................................................................................................................6 2.3.1 Antenna ................................................................................................................................................................................6 2.3.2 Ethernet Connector ..............................................................................................................................................................7 2.3.3 FS2012 Flow Sensor ............................................................................................................................................................7 2.3.4 IDT Sensor Stick ...................................................................................................................................................................7 2.3.5 Grove Sensor .......................................................................................................................................................................8 2.3.6 User Switch Connections .....................................................................................................................................................8 2.3.7 Reset and Boot Select Switch ..............................................................................................................................................8 2.3.8 User LED Connections .........................................................................................................................................................8 2018 Integrated Device Technology, Inc. 2 November 1, 2018