Renesas Starter Kit Quick Start for RL78/L12 LCD Module LCD Panel Reset Serial Header Application Headers Header Switch Port Extra Pins LCD Panel Interface Interface (JA4) DC Power Jack Power LED E1 Header User LEDs LCD Application board V2 E1 Debugger Application Headers User Switches Analog Adjust 2 NOTE: This Quick Start Guide covers installation of the e studio DVD. 1. Installation Do not connect the E1 debugger module until the software support has been installed. 1. Insert the DVD into your computers DVD-ROM drive. The DVD should automatically run the installation program. If the installer does not start, browse to the DVD root folder and double click on setup.exe. 2. Windows 7 / Vista users may see User Account Control dialog box. If applicable, enter the administrator password and click Yes. 3. The installer welcome screen will open. Follow the on-screen instructions to install the RSK software. This process will take several minutes. Note: When prompted to specify a different location for installing any of the tools, do not change the default location. During installation of the GNURL78 tools an activation code may be required. The installer will provide instructions to register for a free activation code. The Windows driver signing dialog box may be displayed. Please accept the driver to continue. 4. After installation has completed successfully, click Finish. 2. Connection 5. Ensure the LCD panel is fitted to the connecter marked JA4 on the RSK. 6. Connect the E1 debugger module to the connector marked E1 on the RSK using the ribbon cable. 7. Connect the E1 debugger module to a spare USB port of your PC. The green ACT LED on the E1 debugger will flash. 8. Please follow the steps below to install the drivers. Note that administrator privileges will be required. Windows XP Windows 7 / Vista a. Select option No, not this time in the Found New A Device driver software installed successfully pop- Hardware Wizard dialog, and click the Next button. up will appear in the Windows toolbar and installation will complete. b. Verify the Recommended option is selected and click Next. c. Click Finish to close the wizard. 9. The green ACT LED on the E1 debugger will illuminate. 2 3. Importing Sample Code into e studio 2 e studio integrates various tools such as compiler, assembler, debugger and editor into a common graphical user 2 2 interface. To learn more on how to use e studio, refer to the e studio help file in the menu bar (Help > Help Contents). 2 2 10. Launch e studio, from the Start Menu. (Start Menu > All Programs > Renesas Electronics e studio > Renesas 2 e studio). 11. In the Select a workspace folder that appears, browse to a suitable location and enter a folder name to save your new workspace. Click OK. 12. An Administrator Privilege dialog box will appear stating that administrator privileges are required, click <Yes> to continue. 2 13. On the e studio welcome screen, click the Go to the workbench arrow icon, on the far right. 14. Right-click in the project explorer window, and select Import. 15. Under Import Source select General > Existing Projects into Workspace, and click Next. 16. Click the Browse button, and locate the following directory: C: Workspace RSK RSKRL78L12, and click OK. 17. Ensure the Copy projects into workspace option is ticked and then click Finish.