AEC-Q200 RoHS Compliance This component is compliant with RoHS directive. This component was always RoHS compliant from the first date of manufacture. SF2434E Designed for Front-end GPS Applications Low Insertion Loss 3.0 x 3.0 x 1.3 mm Surface-mount Case 1223 MHz No Matching Circuit Required SAW Filter Maximum Ratings at +25 C Unless Stated Otherwise Rating Value Units Maximum Input Power Level +10 dBm DC Voltage 3 Volts Specification Temperature Range -40 to +105 C Operable Temperature Range -45 to +125 C Storage Temperature Range -40 to +85 C SM3030-6 Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Center Frequency Fc 1 1223 MHz Maximum Insertion Loss (1196 to 1250 MHz) IL 4.0 5.0 dB Amplitude Ripple (1196 to 1250 MHz) 1.4 2.0 Group Delay Ripple (1196 to 1250 MHz) 8 15 (1226.577 to 1228.623 MHz) 1.0 5 ns (1196.91 to 1217.37 MHz) 3.0 5 (1242.426 to 1249.886 MHz) 2.0 5 Attenuation Referenced to 0 dB: dB 1051 - 1151 MHz 15 20 1304 - 1354 MHz 15 28 Temperature Coefficient of Frequency -36 ppmk Lid Symbolization (Y=year, WW=week, S=shift), dot = Pin 1 Indicator 8Q, YWWS Electrical Connections Pin Description Pin Description 1 Ground 4 Ground 2 Input 5 Output SF2434E SF2368E 3 Ground 6 Ground CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board without imped- ance matching and measured with 50 network analyzer. 2. The design, manufacturing process, and specifications of this filter are subject to change. 3. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 4. US and international patents may apply. 5. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd. 6. Tape and Reel Standard Per ANSI/EIA 481. Copyright Murata Manufacturing Co., Ltd. All Rights Reserved September 2016 SF2434E (R) 10/25/18 Page 1 of 4 www.murata.comFrequency Characteristics Copyright Murata Manufacturing Co., Ltd. All Rights Reserved September 2016 SF2434E (R) 10/25/18 Page 2 of 4 www.murata.com