RFM products are now Murata products. SF1224E-1 RF SAW Filter, 2332.5 MHz, 25.6 MHz Bandwidth 3.0 x 3.0 x 1.4 mm Surface-mount Case Input/Output Impedance 50/50 2332.5 MHz Meets AEC-Q200 Standard Pb Complies with Directive 2002/95/EC (RoHS) SAW Filter Absolute Maximum Ratings Rating Value Units Incident Power in Passband +15 dBm Incident Power Out of Band +27 dBm DC Voltage on any Non-ground Terminal 3 VDC Operating Temperature Range -40 to +105 C Component Storage Temperature Range -40 to +105 C SM3030-6 Storage Temperature Range in Tape and Reel -40 to +85 C Maximum Soldering Profile, 5 cycles/10 seconds maximum 265 C Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Center Frequency f 2332.5 MHz C Maximum Insertion Loss, 2319.4 to 2345.0 MHz IL 1.5 2.5 dB Amplitude Ripple, p-p, 2319.4 to 2345.0 MHz 0.7 1.2 I/O Return Loss, 2319.4 to 2345.0 MHz 10 12 I/O VSWR, 2319.4 to 2345.0 MHz 1.7:1 2.2:1 Attenuation (Reference level from 0 dB) 10 to 2224 MHz 30 38 2453 to 2600 MHz 35 42 dB 2600 to 3000 MHz 30 35 3000 to 6000 MHz 15 18 Terminating Source impedance Z 50 S Terminating Load impedance Z 50 L Single Ended Input / Output, Impedance match No matching network required for operation at 50 ohms Case Style SM3030-6 Lid Symbolization A65 SF1224E-1 SF2368E CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. US and international patents may apply. 2. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd. 2010-2015 by Murata Electronics N.A., Inc. SF1224E-1 (R) 3/12/15 Page 1 of 5 www.murata.comFilter Response Plots 2010-2015 by Murata Electronics N.A., Inc. www.murata.com SF1224E-1 (R) 3/12/15 Page 2 of 5