X-On Electronics has gained recognition as a prominent supplier of R&S HM8134-3 Unclassified across the USA, India, Europe, Australia, and various other global locations. R&S HM8134-3 Unclassified are a product manufactured by Rohde & Schwarz. We provide cost-effective solutions for Unclassified, ensuring timely deliveries around the world.
We are delighted to provide the R&S HM8134-3 from our Unclassified category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the R&S HM8134-3 and other electronic components in the Unclassified category and beyond.
1.2 GHz RF-Synthesizer HM8134-3 Frequency range from 1 Hz to 1.2 GHz Option HO85, high- stability Frequency resolution 1 Hz (accuracy 0.5 ppm) oscillator with a stability of -9 5x10 per day Output power from 127 dBm to + 13 dBm High spectral purity AM / FM / PM and gate modulation See page 125 for technical specifications Internal modulation source Internal modulation sourceFrequency modulation Source: internal or external 1.2 GHz HF Synthesizer HM8134-3 Deviation: 200 Hz to 400 kHz Technical description (depending on frequency band) Resolution: 100 Hz Accuracy: 5 % + residual FM Frequency Ext. frequency response: (to - 1 dB) Range: 1 Hz to 1200 MHz DC coupling: 0 to 100 kHz Resolution: 1Hz AC coupling: 10Hz to 100kHz Settling time: 10ms Distortion: 3 % for deviation 10kHz 10 MHz reference (internal) Phase modulation Stability: 0.5 ppm Source: internal or external Aging: 1 ppm/year Deviation: 0 to 3.14 rad ( 16 MHz) Output (rear panel): TTL 0 to 10 rad ( 16 MHz) Input (front panel): Level: 0 dBm Frequency 10 MHz Resolution: 0.01 rad Accuracy: 5 % to 1 kHz + residual PM Spectral purity (without modulation) Ext. frequency response : (to - 1 dB) Harmonic: - 35 dBc DC coupling: 0 to 100 kHz Non-harmonic: - 60dBc ( 15kHz from carrier) AC coupling: 10 Hz to 100 kHz Analog PM: DC up to 100 kHz Phase noise: (at 20kHz from carrier) Distortion: 3 % for f = 1 kHz and deviation = 10 rad mod 16 MHz: - 120dBc/Hz 16 to 250 MHz: - 95 dBc/Hz FSK modulation 250 to 500 MHz: - 105 dBc/Hz Range: 16 to 1200 MHz 500 to 1200 MHz: - 100 dBc/Hz Mode: 2 FSK levels Data source: external Max. rate: 10 kbit/s Shift (F1 F0): 0 to 10 MHz Resolution: 100 Hz Accuracy: see under FM PSK modulation Range: 16 to 1200 MHz Mode: 2 PSK levels Data source: external Max. rate: 10 Kbit/s Shift (Ph1 Ph0): 0 to 3.14 rad ( 16 MHz) 0 to 10 rad ( 16 MHz) Resolution: 0.01 rad Accuracy: see under PM Pulse modulation Source: external Dynamic range: 60dB Rise/fall times: 200 ns (Typical phase noise at 1 GHz) Delay: 100 ns Max. frequency: 2.5 MHz Output level Input level: TTL Range: - 127 to + 13 dBm Resolution: 0.1 dB Sweep mode Precision: 0.5 dB (for level - 57 dBm) Range: 1 Hz to 1200 MHz Impedance: 50 Depth: 500 Hz to 1200 MHz V.S.W.R.: 1 : 1.5 Number of points: 10 to 500 Time/step: 1 ms to 1 s Modulation sources Resolution: 1ms Internal: 10Hz - 300kHz sine wave, Operating mode: free, single, manual 10Hz - 100kHz Trigger: internal or external square wave, triangle, saw thooth Resolution: 10Hz Protective functions The synthesiser is protected against reverse power applied on RF output External: (input on front panel) up to 1W for a 50 source and against any DC source up to 7V. The Impedance: 10k protection disconnects the output until manually rearmed by operator. Input level: 2V for full scale pp Coupling: AC or DC Miscellaneous Output (on front panel): Impedance: 1 k Interfaces: RS-232, 9-pole D-sub Level: 2 V pp Configuration memories: 10 Power supply: 115/230 V 10 %, 50/60 Hz Amplitude modulation (Level + 7 dBm) Power consumption: approx. 40VA Source: internal or external Operating temperature: + 10 to + 40 C Modulation depth: 0 to 100 % Max. relative humidity: 10 to 90 % (without condensation) Resolution: 0.1 % Safety class: Safety Class I (EN61010-1) Accuracy: 4 % of reading 0.5 % Dimensions (W x H x D): 285 x 75 x 365 mm (AM-depth 80% and f 1 kHz) mod Weight: approx. 7 kg Ext. frequency resp. (to - 1 dB):10Hz to 300kHz for AC Values indicated without tolerances are intended as aids to orientation and Distortion: 2 % (AM-depth 60%, f 1 kHz) mod reflect the characteristics of an average device. 6 % (AM-depth 80%, f : 10Hz to 100kHz) mod Reference temperature 23 C 2 C. Subject to change without notice. www.hameg.com HM8134-3E/0205/ce Subject to alterations HAMEG GmbH Registered Trademark DQS-certified in accordance with DIN EN ISO 9001:2000, Reg.-No.: DE-071040 QM HAMEG GmbH Industriestr. 6 D-63533 Mainhausen Tel +49 (0) 6182 800 0 Fax +49 (0) 6182 800 100 www.hameg.com info hameg.com