BH1749NUC-EVK-001 ROHM

Users Guide Color Sensor BH1749NUC-EVK-001 Manual BH1749NUC-EVK-001 is an evaluation board for BH1749NUC, which is a ROHM Color Sensor. This Users Guide is about how to use BH1749NUC- 1 EVK-001 together with SensorShield* . *1 SensorShield is sold as Shield-EVK-001. Preparation Arduino Uno 1pc Personal Computer installed Arduino IDE 1pc Requirement : Arduino 1.6.7 later Please use Arduino IDE downloaded from BH1749NUC-EVK-001 Manual Users Guide 5. Check log of Serial Monitor (Figure 6) Measurement 1. Select Tools and check the contents enclosed in the red frame. (Figure 3) Board should be Arduino/Genuino Uno . Port should be COMxx (Arduino/Genuino Uno). COM port number is different in each environment. Figure 6. Serial Monitor Board Information Figure 3. COM Port setting 2. Write the program by pressing right arrow button for upload (Figure 4) 3. Wait for the message Done uploading (Figure 4) Figure 7. Picture of the board Figure 4. Uploading 4. Select Tools -> Serial Monitor (Figure 5) Table 1. Parts information Figure 5. Tools Setting 2018 ROHM Co., Ltd. No. 61UG004E Rev.001 2/2 Apr.2018