BH28SA3WGUT-E2 ROHM

CMOS LDO Regulators for Portable Devices 1ch 150mA CMOS LDO Regulators No.11020EAT10 BHSA3WGUT Series Description The BHSA3WGUT Series are 150 mA output CMOS regulators that deliver a highly stable output voltage with the precision of 1%. With the use of ROHMs original technology, the load regulation of only 2 mV, 100 mV I/O drop voltage, and the load transient of 50mV (at 1mA100mA) have been achieved. The VCSP60N1 package is extremely compact as just 0.96 mm 0.96 mm, and the IC s enhanced protection circuits contribute to improved application safety. Features 1) High accuracy output voltage: 1% 2) I/O drop voltage: 100 mV (at 100 mA) 3) Load Transient Vout : 50mV (at 1mA100mA) 4) Stable with ceramic capacitors (1F) 5) Low bias current: 40 A 6) High ripple rejection ratio: 63 dB (Typ., 1 kHz) 7) Output voltage on/off control 8) Built-in overcurrent (short) and thermal shutdown circuits 9) Uses the VCSP60N1 WL-CSP package. Applications Battery-driven portable devices, etc. Product Line 150 mA BHSA3WGUT Series Product name 1.8 2.8 3.0 Package BHSA3WGUT VCSP60N1 Model name: BHSA3W a b Description Symbol Output voltage specification Output voltage (V) 18 1.8 V (Typ.) a 28 2.8 V (Typ.) 30 3.0 V (Typ.) b Package GUT: VCSP60N1 www.rohm.com 2012.02 - Rev.A 1/14 2012 ROHM Co., Ltd. All rights reserved. Technical Note BHSA3WGUT Series Absolute Maximum Ratings Parameter Symbol Ratings Unit Applied supply voltage VMAX -0.3 to +6.5 V *1 Power dissipation Pd 530 mW Maximum junction temperature TjMAX 125 Operating temperature range Topr -40 to +85 Storage temperature range Tstg -55 to +125 *1: Derated at 5.3 mW/ for temperature above Ta = 25, when mounted on a glass epoxy PCB (7 mm 7 mm 0.8 mm). Recommended Operating Ranges (not to exceed Pd) Parameter Symbol Ratings Unit Power supply voltage VIN 2.2 to 5.5 V Output current IOUT 0 to 150 mA Recommended Operating Conditions Ratings Parameter Symbol Unit Conditions Min. Typ. Max. The use of ceramic *2 Input capacitor CIN 0.5 1.0 F capacitors is recommended. The use of ceramic *2 Output capacitor CO 0.7 1.0 F capacitors is recommended. *2: The minimum value of capacitance must be met this specifications over full operating conditions. (ex. Temperature, DC bias, aging conditions) www.rohm.com 2012.02 - Rev.A 2/14 2012 ROHM Co., Ltd. All rights reserved.