BU4S584G2-TL ROHM

Datasheet General Purpose CMOS Logic IC Single Schmitt Trigger Inverter Gate BU4S584G2 General Description Key Specifications The BU4S584G2 consist of single schmitt trigger inverter. Supply Voltage Range: +3V to +16V Also, because a buffer with the inverter is added to the Input Voltage Range: V to V SS DD gate output, the I/O transmission characteristic is Operating Temperature Range: -40C to +85C improved, and a change of the propagation delay time by the increase of the load capacitance is minimized. Features Packages W(Typ) x D(Typ) x H(Max) Low Power Consumption SSOP5 2.90mm x 2.80mm x 1.25mm High Noise Immunity Wide Operating Supply Voltage Range High Input Impedance High Fan Out 2 L-TTL inputs or 1 LS-TTL Input can be directly driven Output is Buffered Pin Configurations Pin Descriptions Pin No. Symbol I/O Function (Top View) 1 NC - NC VDD Y 2 A I Input 5 4 3 VSS - Ground 4 Y O Output 5 VDD - Power supply 1 2 3 NC A VSS Truth Table INPUT OUTPUT A Y L H H L Product structure : Silicon monolithic integrated circuit This product has no designed protection against radioactive rays . www.rohm.com TSZ02201-0RDR0GZ00210-1-2 2014 ROHM Co., Ltd. All rights reserved. 1/14 TSZ22111 14 001 02.Jul.2014 Rev.001 DatasheetDatasheet BU4S584G2 Absolute Maximum Ratings Parameter Symbol Rating Unit Supply Voltage V -0.3 to +18.0 V DD Input Voltage V (V -0.3) to (V+0.3) V IN SS DD Input Current I 10 mA IN Operating Temperature T -40 to +85 C opr Storage Temperature T -55 to +150 C stg Maximum Junction Temperature T +150 C Jmax (Note 1) Power Dissipation P 0.67 W D (Note 1)Mounted on 1-layer 70mm x 70mm x 1.6mm glass epoxy board. Reduce 5.4mW per 1C above 25C Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. Recommended Operating Conditions Parameter Symbol Rating Unit Supply Voltage V +3.0 to +16.0 V DD Input Voltage V V to V V IN SS DD www.rohm.com TSZ02201-0RDR0GZ00210-1-2 2014 ROHM Co., Ltd. All rights reserved. 2/14 TSZ22111 15 001 02.Jul.2014 Rev.001