BU7242YFVM-CGTR ROHM

Datasheet Input/Output Rail-to-Rail Low Supply Current CMOS Operational Amplifier for Automotive BU7242YFVM-C General Description Key Specifications BU7242YFVM-C is an input/output Rail-to-Rail CMOS Operating Supply Voltage Range: operational amplifier that operates on a wide Single Supply 1.8 V to 5.5 V temperature range and low supply current. It is suitable Dual Supply 0.9 V to 2.75 V for a sensor amplifier and battery-powered equipment Operating Temperature Range: -40 C to +125 C which require low input bias current. Supply Current: 180 A(Typ) Input Offset Current: 1 pA(Typ) Input Bias Current: 1 pA(Typ) Features (Note 1) AEC-Q100 Qualified Special Characteristics Input/output Rail-to-Rail Input Offset Voltage Low Operating Supply Voltage -40C to +125C: 12 mV(Max) Low Supply Current Low Input Bias Current Wide Operating Temperature Range Package W(Typ) x D(Typ) x H(Max) (Note 1) Grade 1 MSOP8 2.90mm x 4.00mm x 0.90mm Applications Sensor Amplifiers Battery-powered Equipment Automotive Electronics Pin Description Pin Configuration Pin Pin Function (TOP VIEW) No. Name (TOP VIEW) 1 OUT1 Output 1 OUT1 1 8 VDD 2 IN1- Inverting input 1 IN1- CH 2 7 OUT2 + - 1 + 3 IN1+ Non-inverting input 1 CH IN1+ 3 6 IN2- 4 VSS Ground/Negative power supply - + 2 5 IN2+ Non-inverting input 2 VSS 4 5 IN2+ 6 IN2- Inverting input 2 7 OUT2 Output 2 8 VDD Positive power supply Product structure Silicon monolithic integrated circuit This product has no designed protection against radioactive rays. www.rohm.com TSZ02201-0GLG2G500810-1-2 2016 ROHM Co., Ltd. All rights reserved. 1/22 19.Feb.2018 Rev.003 TSZ2211114001 Datasheet BU7242YFVM-C Block Diagram VDD Vbias IN+ Class OUT AB control IN- Vbias VSS Figure 1. Block Diagram Absolute Maximum Ratings (Ta=25C) Parameter Symbol Rating Unit Supply Voltage VDD-VSS 7 V (Note 2,3) Power Dissipation Pd 0.58 W (Note 4) Differential Input Voltage VID VDD - VSS V Input Common-mode Voltage Range VICM (VSS - 0.3) to (VDD + 0.3) V Input Current I 10 mA I 1.8 to 5.5 Operating Supply Voltage Vopr V 0.9 to 2.75 Operating Temperature T -40 to +125 C opr Storage Temperature T -55 to +150 C stg Maximum Junction Temperature T 150 C jmax (Note 2) To use at temperature above Ta=25 C reduce 4.7 mW/C. (Note 3) Mounted on an FR4 glass epoxy PCB 70 mm70 mm1.6 mm (Copper foil area less than 3 %). (Note 4) The differential input voltage is the voltage difference between inverting input and non-inverting input The input pin voltage is set to more than VSS. Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over the absolute maximum ratings. www.rohm.com TSZ02201-0GLG2G500810-1-2 2016 ROHM Co., Ltd. All rights reserved. 2/22 19.Feb.2018 Rev.003 TSZ2211115001