TRR01MZPF1203 ROHM

Sulfur Tolerant Chip Resistors TRR Series Datasheet Features 1) Special construction prevents sulfur gas penetration, significantly increasing reliability. 2) ROHM resistors have obtained ISO9001 / ISO / TS16949 certification. Products List Operating Size Rated Power Limiting Element Temperature Resistance Temperature (70C) Voltage Coefficient Tolerance Part No. Resistance Range Series Range (mm) (inch) (C) (W) (V) (ppm / C) (%) +500 / 250 1 to 9.1 J(5%) 200 E24 0.063 50 10 to 10M TRR01 1005 0402 100 F(1%) 10 2.2M to Jumper type : Rmax = 50m / Imax. = 1A 400 1 9.1 to J(5%) E24 200 10M 0.1 50 10 to TRR03 1608 0603 100 F(1%) 10 to 10M Jumper type : Rmax = 50m / Imax. = 1A 55 to +155 400 1 9.1 to J(5%) E24 200 10 10M 0.125 150 to TRR10 2012 0805 100 F(1%) 10 2.2M to Jumper type : Rmax = 50m / Imax. = 2A 400 1 to 9.1 J(5%) 200 E24 0.25 200 10 to 10M TRR18 3216 1206 100 F(1%) 10 2.2M to Jumper type : Rmax = 50m / Imax. = 2A Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product before using or ordering it. Part Number Description TRR 0 1 MPZ J01 5 Part No. (mm inch ) Packaging Specifications Code Nominal Resistance Size Resistance Packaging Quantity Tolerance Resistance code, 3 or 4 digits. 01 (1005 0402 ) Part No. Code D ( 0.5% ) TRR specifications / Reel 000 denotes jumper type. 03 (1608 0603 ) F ( 1% ) (Sulfur Tolerant Chip Resistors) Paper tape TRR01 MZP 10,000 10 (2012 0805 ) (2mm Pitch) J ( 5% ) Resistance Resistance Paper tape 18 (3216 1206 ) tolerance code TRR03 EZP 5,000 (4mm Pitch) Paper tape F : 4 digits TRR10 EZP 5,000 (4mm Pitch) J : 3 digits Paper tape TRR18 EZP 5,000 (4mm Pitch) Ex.) 1 = 1R0 ( 5% ) 9.1 = 9R1 ( 5% ) 10 = 10R0 ( 1%) 100 ( 5% ) 1M = 1004 ( 1%) 105 ( 5% ) www.rohm.com 1/4 c 2014 ROHM Co., Ltd. All rights reserved. 2014.12 - Rev.C TRR Series Data Sheet Chip Resistor Dimensions and Markings TRR01 / 03 TRR10 / 18 L L W W a a t t b b (Unit : mm) Marking Part No. (mm) (inch) L W t a b existence Including jumper type +0.05 1.00.05 0.50.05 0.350.05 0.330.08 0.25 TRR01 1005 0402 No 0.1 TRR03 1608 0603 1.60.1 0.80.1 0.450.1 0.40.1 0.30.2 No +0.15 TRR10 2012 0805 2.00.1 1.250.1 0.550.1 0.43 0.40.2 No 0.1 +0.2 TRR18 3216 1206 3.20.15 1.60.15 0.550.1 0.69 0.50.25 No 0.15 Land pattern Example B D C Land A (Unit : mm) Dimensions A B C D Part No. TRR01 0.5 1.3 0.5 0.4 TRR03 1.0 2.0 0.8 0.5 TRR10 1.2 2.6 1.15 0.7 TRR18 2.2 4.0 1.5 0.9 www.rohm.com 2/4 c 2014 ROHM Co., Ltd. All rights reserved. 2014.12 - Rev.C