Technical Data Sheet Adaptor(Bullet) WSMP W1K10E-K00D3 Female to Female All dimensions are in mm inches tolerances according to ISO 2768 m-H Interface According to Rosenberger WSMP Interface standards Material and plating Connector parts Material Plating Center contact CuBe Gold, min. 1.27 m, over nickel Outer contact CuBe Gold, min. 1.27 m, over nickel Dielectric PTFE Rosenberger of North America, LLC Tel. : +1.717.859.8900 Page P.O. Box 309 Akron, PA USA 17501 Fax : +1.717.859.7044 www.rosenbergerna.com Email : info rosenbergerna.com 1 / 2 RF 35/05.10/6.0 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG Technical Data Sheet Adaptor(Bullet) WSMP W1K10E-K00D3 Female to Female Electrical data Impedance 50 Frequency DC to 100 GHz Return loss (typical) 26 dB, DC to 26.5 GHz 19 dB, 26.5 to 65 GHz f(GHz) Insertion loss 0.12 x dB 3 Insulation resistance 3.5 x10 M Center contact resistance 2.0 m Outer contact resistance 6.0 m Test voltage (at sea level) 250 V rms RF High Potential (at sea level) 150 V rms 5 MHz RF-leakage -80 dB (typical mated pair) - Limitations are possible due to the used cable type Mechanical data Mating cycles - Full Detent mating plug 100 - Smooth Bore mating plug 500 Engagement force (typical) - Full Detent 11 N 2.5 lbs f - Smooth Bore 5.3 N 1.2 lbs f Disengagement force (typical) - Full Detent 20 N 4.5 lbs f - Smooth Bore 4.5 N 1.0 lb f Environmental data Temperature range -55 to +165C Thermal shock MIL-STD-202, Meth. 107, Cond. B Corrosion MIL-STD-202, Meth. 101 Vibration MIL-STD-202, Meth. 204, Cond. D Shock MIL-STD-202, Meth. 213, Cond. I Moisture resistance MIL-STD-202, Meth. 106, except Step 7B 2002/95/EC (RoHS) compliant Tooling Extraction tool W1W002-000 Suitable cables N/A Packing Standard 100 pcs in a bag While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. Draft Date Approved Date Rev. Engineering change number Name Date Paul Czikora 12/20/11 Paul Czikora 12/20/11 100 11v-001 Paul Czikora 12/20/11 Rosenberger of North America, LLC Tel. : +1.717.859.8900 Page P.O. Box 309 Akron, PA USA 17501 Fax : +1.717.859.7044 www.rosenbergerna.com Email : info rosenbergerna.com 2 / 2 RF 35/05.10/6.0 Dieses Dokument ist urheberrechtlich geschtzt This document is protected by copyright Rosenberger Hochfrequenztechnik GmbH & Co. KG