NOTES: REVISION AL C 1. REPRESENTS A CRITICAL DIMENSION. PMSDX-XX-XXXX-X-XX.XX-X-XXX 2. BURR ALLOWANCE: .003 .08 MAX. 3. PARTS TO BE MOLDED TO POSITION. FEP CABLE OPTION OPTION 4. MINIMUM PIN PULLOUT FORCE: 5.000LB 22.24N . -T: FEP 5. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS INTO PLACE. (LEAVE BLANK FOR STANDARD SINGLE DO NOT 6. FOLLOW CO-RF-WI-3001-M AND SAMTEC PACKAGING STANDARDS. PVC INSULATION) SCALE FROM 7. ONLY AVAILABLE IN TIN PLATING. -M: METAL LATCH (USE IPBD-XX-D-M) (SEE NOTE 20) 8. ALL PARTS TO PASS ELECTRICAL TEST UPON ASSEMBLY THIS PRINT C (LEAVE BLANK FOR PLASTIC) (INCLUDING HI-POT TEST AT 1000 VOLTS DC). AFTER FINAL ELECTRICAL TEST, No OF POSITIONS LABEL EACH ASSEMBLY WITH (1) ET STAMP ON THE BODY. -02 THRU -15 DOUBLE 9. APPLICATIONS INVOLVING SEVERE BENDING REQUIRE 6 MINIMUM CABLE LENGTH. (PER ROW) -LUS: PLASTIC LATCH UP, STRAIGHT 10. DELETED. -LDS: PLASTIC LATCH DOWN, STRAIGHT WIRE GAUGE (AWG) 11. DELETED. -LUX: PLASTIC LATCH UP, CROSSED 12. -203 USES 20 GAGE 300 VOLT CABLE. PVC: -16, -18, -206, -203, -22, -24 -LDX: PLASTIC LATCH DOWN, CROSSED 13. AVAILABLE ONLY AS AN ASO. FEP: *-18, -24 14. -206 USES 20 GAGE 600 VOLT CABLE. -MUS: METAL LATCH UP, STRAIGHT COLOR CODE 15. MINIMUM METAL LATCH RETENTION FORCE: 1.000LB 4.45N . -MDS: METAL LATCH DOWN, STRAIGHT 16. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP DIMENSIONS, -MUX: METAL LATCH UP, CROSSED LEAVE BLANK FOR ALL BLACK WIRE TOLERANCES, TOOLING AND ITS REQUIREMENTS -MDX: METAL LATCH DOWN, CROSSED C: COLOR CODED WIRE, SEE COLOR 17. FOR LENGTHS LESS THAN 12 IN, TOLERANCE SHALL SEQUENCE TABLE, SHEET 3 BE .125 3.18 . FOR OTHER LENGTHS, TOLERANCES SHALL BE 2%. END OPTION (NOT AVAILABLE WITH FEP OPTION) 18. AVAILABLE TO EXISTING CUSTOMERS ONLY, DO NOT DESIGN AS OF REVISION P. -S: SINGLE END 19. AVAILABLE TO EXISTING CUSTOMERS ONLY, DO NOT DESIGN AS OF REVISION Z. LEAD STYLE -D: DOUBLE END 20. ASSEMBLIES USING THE FEP OPTION ARE FOR CRIMP APPLICATIONS ONLY. (MUST CHOOSE LUS, LDS, LUX, LDX, -SP: STANDARD POWER (C-169-XX-SP-T) 21. CUT LENGTH IS ASSEMBLY LENGTH MINUS OVERALL LENGTH SUBTRACTOR. MUS, MDS, MUX, OR MDX) *(SEE NOTE 19) (No OF POS x .165 4.19 ) -HP: HIGH POWER (C-169-XX-HP-T) 02 01 + .040 1.02 ) REF *(SEE NOTE 18) *AVAILABLE TO EXISTING CUSTOMERS ONLY -K: KEYED POLARIZATION (C-169-XX-SP-T) (USE IPBD-XX-D-K) (SEE FIG 4, SHT 3) .478 12.14 .337 8.56 REF REF ASSEMBLED LENGTH SPECIFY IN INCHES 06 N 3.00 INCHES MINIMUM FOR SINGLE ENDED (SEE TABLE 2) 3.50 INCHES MINIMUM FOR DOUBLE ENDED USE DWCX-XX-XX-XXX IPBD-XX-D .770 19.56 REF .485 12.32 DWCX-XX-XX-XXX C REF XX.XX (SEE NOTE 17) C XX.XX (SEE NOTE 17) DWCX-XX-XX-XXX FIG 2 (PMSDX-05-XXXX-X-XX.XX-D-LUS SHOWN) SECTION (SAME AS FIG 1, EXCEPT AS SHOWN) FIG 1 (PMSDX-05-XXXX-X-XX.XX-S SHOWN) PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND DIMENSIONS ARE IN INCHES. PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE * AVAILABLE TO OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 EXISTING CUSTOMERS REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS ONLY .XXXX: .0020 .051 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 1:1 ** SEE NOTES 12 & 13 DESCRIPTION: .165 4.19 SOCKET DISCREET CABLE ASSEMBLY *** SEE NOTE 14 HOUSING: PBT UL 94V-0/5VA, COLOR: NATURAL CONTACT: PHOS BRONZE DWG. NO. CABLE INSULATION: SEE CALLOUT PMSDX-XX-XXXX-X-XX.XX-X-XXX WIRE: SEE CALE PRINT (NOT LEAD FREE) METAL LATCH: NICKEL-PLATED BeCu F: DWG MISC MKTG PMSDX-XX-XXXX-X-XX.XX-X-XXX-MKT.SLDDRW SHEET OF BY: DEAN P 07/28/2004 1 3REVISION AL N N 01 N 02 02 02 02 01 01 N 01 LATCH- END 1 LATCH- LATCH- END 2 END 1 LATCH- END 2 -LDS LATCH UP- CABLE STRAIGHT -LUS LATCH DOWN- CABLE STRAIGHT (PIN 1 TO PIN N/2) (PIN 1 TO PIN N/2 +1) N 01 N N 02 02 02 02 01 01 01 N LATCH- END 1 LATCH- LATCH- END 2 END 1 LATCH- END 2 -LUX -LDX LATCH UP- CABLE CROSSED LATCH DOWN- CABLE CROSSED (PIN 1 TO PIN N) (PIN 1 TO PIN 1) PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING .165 4.19 SOCKET DISCREET CABLE ASSEMBLY DWG. NO. SHEET SCALE: 1:1 PMSDX-XX-XXXX-X-XX.XX-X-XXX F: DWG MISC MKTG PMSDX-XX-XXXX-X-XX.XX-X-XXX-MKT.SLDDRW SHEET OF BY: DEAN P 07/28/2004 2 3