RF-18 (Rev 28JUN18) RF17802RP101BJ10200 RF17802SP102RP10300 50 W RG 178 CABLE ASSEMBLIES Mates with: 2.1dK SPECIFICATIONS MCX, MMCX, BNC5, Light Gauge 30 AWG TNC, SMA, SMB5 For complete specifications RG 178 coax cable see www.samtec.com RF178 RF Connector: Outer Contact Material: Au plated Brass (SMA & SMB) Au plated BeCu (MCX & MMCX) Nickel (BNC & TNC) Center Contact Material: Au plated Brass (MCX-P, MMCX-P, BNC, Solutionator TNC & SMB) DESIGN IN A MINUTE Au plated BeCu (SMA-J & MCX-J) Standard Heat Create a full system: Insulator Material: cable assembly and board level mates, Shrink PTFE 50 W and 75 W solutions Operating Temperature: -50 C to +165 C Free samples available Frequency Range: Visit: rf.samtec.com 0~5 GHz (Connector dependent) SMA, MCX, MMCX, Impedance: SMB, BNC, TNC and 50 W N Type End Options RoHS Compliant: Yes RG 178 Cable: Impedance: 50 W END 1 END 2 Capacitance: CABLE TYPE CONNECTOR CONNECTOR 96 pF/meter Propagation Delay: 4.83 nsec/meter Max Attenuation (cable only): 1.7 dB 1 GHz for 1 meter Specify END OPTIONS from chart Conductor Size: RF178 30 AWG, (0.31 mm) .012 dia. = RG 178 Cable Conductor Material: Silver Plated Copper Conductor Resistance: 0.34 W/meter max Current Rating: 3 A DC XXXX = OAL (millimeters) Insulator Diameter: (0.86 mm) .034 Insulator Material: PTFE Dielectric Constant: 2.1 dK 02RP104SP3 SHOWN Shield Material: Silver Plated Copper Clad Steel Jacket Material: FEP Jacket Diameter: (1.80 mm) .071 END OPTIONS END OPTIONS Jacket Temp Rating: -50 C to +165 C 01BJ1 = SMA 02SP1 = MCX Jacket Color: Straight Bulkhead Jack Straight Plug Amber 01BR1 = SMA (30 (0.76 m) Gold Straight Bulkhead Jack, Bend Radius: on Center Contact, Reversed Polarity 10.2 mm Gold Flash on Shell) RoHS Compliant: (30 (0.76 m) Gold Yes on Center Contact, 03SP1 = MMCX Gold Flash on Shell) Straight Plug 02SJ1 = MCX (30 (0.76 m) Gold on Center Contact, Straight Jack (30 (0.76 m) Gold Gold Flash on Shell) on Center Contact, Gold Flash on Shell) 03RP1 = MMCX 02RP1 = MCX Right-angle Plug Right-angle Plug (30 (0.76 m) Gold (30 (0.76 m) Gold on Center Contact, on Center Contact, Gold Flash on Shell) Gold Flash on Shell) Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.RF17801BJ103RP10200 RF17807BJ203SP10200 RF17804SP302SJ10100 RF178 SERIES 50 W RG 178 CABLE ASSEMBLIES Straight or Right-angle Variety of Bulkhead Jacks Single or Double ended ALSO AVAILABLE (MOQ Required) Additional stripping and tinning options OTHER SOLUTIONS IP67 TNC option Additional plating options Cable connector kits Additional end connector combinations (see cable components catalog pages) OVERALL LENGTH XXXX = Overall Length in millimeters 0100 (100 mm) 3.94 minimum END OPTIONS END OPTIONS 04SP3 = BNC 05BJ3 = TNC Straight Plug Straight (10 (0.25 m) Bulkhead Jack Gold on (10 (0.25 m) Center Contact, Gold on Nickel on Shell) Center Contact, Nickel on Shell) 05SP3 = TNC Straight Plug (10 (0.25 m) Gold on 06BJ2 = N Type Center Contact, Straight Nickel on Shell) Bulkhead Jack STRIPPED & TINNED (30 (0.76 m) (Dimensions in mm) Gold on 04BJ2 = BNC Center Contact, Straight Nickel on Shell) CALLOUT A B C Bulkhead Jack (30 (0.76 m) 303030 3.0 3.0 3.0 Gold on 303040 3.0 3.0 4.0 Center Contact, Nickel on Shell) SING = 403030 4.0 3.0 3.0 Single Ended 403040 4.0 3.0 4.0 (End 2 Callout) 07BJ2 = SMB Straight 404040 4.0 4.0 4.0 Bulkhead Jack B Both center conductor and XXXXXX = (30 (0.76 m) C A braid shield are stripped, Gold on Stripped & Tinned only the center (End 2 Callout) Center Contact, conductor is tinned. Nickel on Shell) Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.