RF179-73RP1-74SP3-0150 Samtec

RF-18 (Rev 28JUN18) RF17974BJ372RP10200 75 W OPTIMIZED RG 179 CABLES 30 AWG 75 RG 179 W Mates with: SPECIFICATIONS coax cable BNC7T, MCX7, MMCX7, SMB7H, DIN7A For complete specifications see www.samtec.com RF179 RF Connector: Standard Outer Contact Material: Ni plated Brass Heat Shrink (BNC) Au plated Brass (SMB) Solutionator DESIGN IN A MINUTE Au plated BeCu (MCX, MMCX7, DIN) Center Contact Material: Create a full system: Au plated Brass cable assembly and board level mates, (BNC-P, MCX, MMCX7) 50 aW nd 75 W solutions Au plated BeCu Free samples available (SMB) Visit: rf.samtec.com Au plated Copper Alloy Single or Double (DIN, BNC-J) Ended Insulator Material: PTFE Operating Temperature: -50 C to +165 C Impedance: 75 W * See connector component Frequency Range: pages for specific range. 0~4 GHz * (Cable & connector dependent) RoHS Compliant: Yes END 1 END 2 CABLE TYPE CONNECTOR CONNECTOR RG 179 Cable: Impedance: 75 W 3 W Capacitance: 64 pF/meter Propagation Delay: Specify END OPTIONS from chart 4.83 nsec/meter RF179 Max Attenuation = RG 179 Cable (cable only): 0.8 dB 1 GHz for 1 meter Conductor Size: 30 AWG, (0.31 mm) .012 dia. Conductor Material: Silver Plated Copper XXXX = OAL (millimeters) Conductor Resistance: 0.34 /meter maxW Current Rating: 3 A DC Insulator Diameter: (1.6 mm) .063 Insulator Material: 77RP274SP3 SHOWN PTFE Dielectric Constant: 1.8 dK Shield Material: Silver Plated Copper END OPTIONS END OPTIONS Jacket Material: FEP 73SP4 = 75 W MMCX7 72RP1 = 75 W MCX Jacket Diameter: Straight Plug Right-angle Plug (2.54 mm) .100 (10 (0.25 m) Gold (30 (0.76 m) Gold Bend Radius: on Center Contact, on Center Contact, 10.2 mm Gold Flash on Shell) Gold Flash on Shell) Jacket Temp Rating: -50 C to +165 C 73RP1 = 75 W MMCX7 72SP1 = 75 W MCX Jacket Color: Right-angle Plug Straight Plug Amber (30 (0.76 m) Gold (30 (0.76 m) Gold RoHS Compliant: on Center Contact, on Center Contact, Yes Gold Flash on Shell) Gold Flash on Shell) 73SJ4 = 75 W MMCX7 77SP1 = 75 W SMB Straight Jack Straight Plug (10 (0.25 m) Gold (30 (0.76 m) Gold on Center Contact, on Center Contact, Gold Flash on Shell) Gold Flash on Shell) Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.RF17978SP477SP10200 RF17972SP173SJ40100 RF179 SERIES 75 W OPTIMIZED RG 179 CABLES Straight or Right-angle terminations ALSO AVAILABLE (MOQ Required) OTHER SOLUTIONS Wide variety of 75 W end options Additional stripping and tinning options including BNC, MCX and SMB Cable connector kits Additional plating options (see cable components catalog pages) Additional end connector combinations OVERALL LENGTH XXXX = Overall Length in millimeters 0100 (100 mm) 3.94 minimum STRIPPED & TINNED (Dimensions in mm) CALLOUT A B C 303030 3.0 3.0 3.0 303040 3.0 3.0 4.0 403030 4.0 3.0 3.0 403040 4.0 3.0 4.0 END OPTIONS 404040 4.0 4.0 4.0 77RP1 = 75 W SMB Both center conductor and braid shield are Right-angle Plug stripped, only the center conductor is tinned. (30 (0.76 m) Gold on Center Contact, Gold Flash on Shell) END OPTIONS 74SP3 = 75 W BNC Straight Plug 78SP4 = 75 DINW D4SP3 = 75 W BNC Straight Plug Die Cast Straight Plug (10 (0.25 m) Gold on Center Contact, (10 (0.25 m) Gold Nickel on Shell) on Center Contact, Nickel on Shell) SING = Single Ended 74BJ3 = 75 BNC W (End 2 callout) Bulkhead Jack (10 (0.25 m) Gold B on Center Contact, XXXXXX = C A Nickel on Shell) Stripped & Tinned (End 2 callout) Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtecs specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.