REVISION AL RFXXXX-XXXXX-XXXXXX-XXXX DESIGNED & DIMENSIONED IN MILLIMETERS INCHES CABLE CALL OUT OVERALL CABLE LENGTH 174: CCA-174 (RG-174 COAXIAL CABLE) MILLIMETERS OF CABLE 316: CCA-316 (RG-316 COAXIAL CABLE) DO NOT THIS PRODUCT MANUFACTURED 0100 MIN. (SEE NOTE 8 & 9) Pb 316A: CCS-174525-01-C (RG-316 ACCLIMATE CABLE) SCALE FROM WITH LEAD-FREE PROCESSING END 2 PLATING OPTION THIS PRINT END 1 CONNECTOR 1: GOLD ALL COMPONENTS -01SP: SMA-P-C-X-ST-CA1 (SEE SHEET 3) 2: GOLD / NICKEL COMBINATION -01RP: SMA-P-C-X-RA-CA1 (SEE SHEET 3) 3: ALTERNATE GOLD / NICKEL -01BJ: SMA-J-C-X-ST-BH1 (SEE SHEET 3) FIG 2 4: ALTERNATE GOLD / GOLD FLASH / NICKEL -01BR: SMA-J-C-X-ST-BR1 (SEE SHEET 3) CABLE STRIPPING DIMENSIONS 7. ALTERNATE GOLD MEDIUM/ GOLD FLASH -02SJ: MCX-J-C-X-ST-CA1 (SEE SHEET 3) PER CONFIGURATIONS (LEAVE BLANK FOR -SING OR -XXXXXX -02RP: MCX-P-C-XX-RA-CA1 (SEE SHEET 3) (SEE TABLE 1)(SEE NOTES 12,13,14,15) -02SP: MCX-P-C-XX-ST-CA1 (SEE SHEET 4) END 2 PREPARATION) -03SP: MMCX-P-C-XX-ST-CA1 (SEE SHEET 4) END 2 CONNECTOR OR PREPARATION -03RP: MMCX-P-C-X-RA-CA1 (SEE SHEET 4) mm C -01SP: SMA-P-C-X-ST-CA1 (SEE SHEET 3) -04SP: BNC5-P-C-XX-ST-CA1 (SEE SHEET 4) -01RP: SMA-P-C-X-RA-CA1 (SEE SHEET 3) -04BJ: BNC5-J-C-XX-ST-BH1 (SEE SHEET 4) mm -01BJ: SMA-J-C-X-ST-BH1 (SEE SHEET 3) -05SP: TNC-P-C-XX-ST-CA1 (SEE SHEET 4) mm -01BR: SMA-J-C-X-ST-BR1 (SEE SHEET 3) -05BJ: TNC-J-C-XX-ST-BH1 (SEE SHEET 5) -02SJ: MCX-J-C-X-ST-CA1 (SEE SHEET 3) -06BJ: NTPE-J-C-XX-ST-BH1 (SEE SHEET 5) -02RP: MCX-P-C-XX-RA-CA1 (SEE SHEET 3) -07SP: SMB5-P-C-XX-ST-CA1 (SEE SHEET 5) -02SP: MCX-P-C-XX-ST-CA1 (SEE SHEET 4) -07RP: SMB5-P-C-XX-RA-CA1 (SEE SHEET 5) -03SP: MMCX-P-C-XX-ST-CA1 (SEE SHEET 4) -07BJ: SMB5-J-C-X-ST-BH1 (SEE SHEET 5) mm C -03RP: MMCX-P-C-X-RA-CA1 (SEE SHEET 4) -13GP: GRFS-P-C-X-ST-CA1 -04SP: BNC5-P-C-XX-ST-CA1 (SEE SHEET 4) (316 OPTION ONLY) (SEE SHEET 5) mm C -04BJ: BNC5-J-C-XX-ST-BH1 (SEE SHEET 4) -13GJ: GRFS-J-C-X-ST-CA1 -05SP: TNC-P-C-XX-ST-CA1 (SEE SHEET 4) (316 OPTION ONLY) (SEE SHEET 6) -05BJ: TNC-J-C-XX-ST-BH1 (SEE SHEET 5) -01SB: SMA-J-C-X-ST-SB1 (SEE SHEET 6) -06BJ: NTPE-J-C-XX-ST-BH1 (SEE SHEET 5) -01SR: SMA-J-C-X-ST-SR1 (SEE SHEET 6) -07SP: SMB5-P-C-XX-ST-CA1 (SEE SHEET 5) -01PN: SMA-J-C4-XX-ST-PN1 (SEE SHEET 6) -07RP: SMB5-P-C-XX-RA-CA1 (SEE SHEET 5) -S7SP: SSMB-P-C-XX-ST-CA1 (SEE SHEET 7) -07BJ: SMB5-J-C-X-ST-BH1 (SEE SHEET 5) -S7RP: SSMB-P-C-XX-RA-CA1 (SEE SHEET 7) -13GP: GRFS-P-C-X-ST-CA1 -V3SJ: MMCXV-J-C-XX-ST-CA1 (SEE SHEET 7) (316 OPTION ONLY) (SEE SHEET 5) -V3SP: MMCXV-P-C-XX-ST-CA1 (SEE SHEET 7) -13GJ: GRFS-J-C-X-ST-CA1 -V3RP: MMCXV-P-C-XX-RA-CA1 (SEE SHEET 7) (316 OPTION ONLY) (SEE SHEET 6) -23GJ: AC-J-C-X-ST-CA1 -01SB: SMA-J-C-X-ST-SB1 (SEE SHEET 6) (316A OPTION ONLY, SEE SHEET 7) -01SR: SMA-J-C-X-ST-SR1 (SEE SHEET 6) -23GP: AC-P-C-X-ST-CA1 -01PN: SMA-J-C4-XX-ST-PN1 (SEE SHEET 6) (316A OPTION ONLY, SEE SHEET 7) -S7SP: SSMB-P-C-XX-ST-CA1 (SEE SHEET 7) -S7RP: SSMB-P-C-XX-RA-CA1 (SEE SHEET 7) END 1 PLATING OPTION -V3SJ: MMCXV-J-C-XX-ST-CA1 (SEE SHEET 7) 1: GOLD ALL COMPONENTS -V3SP: MMCXV-P-C-XX-ST-CA1 (SEE SHEET 7) 2: GOLD / NICKEL COMBINATION C -V3RP: MMCXV-P-C-XX-RA-CA1 (SEE SHEET 7) 3: ALTERNATE GOLD / NICKEL -23GJ: AC-J-C-X-ST-CA1 FIG 1 4: ALTERNATE GOLD / GOLD FLASH / NICKEL (316A OPTION ONLY, SEE SHEET 7) RFXXX-01SPX-01RPX-XXXX SHOWN 7. ALTERNATE GOLD MEDIUM/ GOLD FLASH -23GP: AC-P-C-X-ST-CA1 NOTES: (SEE SHEET 3 FOR PLATING SPECIFICS) (316A OPTION ONLY, SEE SHEET 7) -SING: SINGLE ENDED (ONE END ONLY, SEE NOTE 11) C 1. REPRESENTS A CRITICAL DIMENSION. -XXXXXX: STRIPPED AND TINNED (THIS END ONLY- 2. CABLE CUT LENGTH: = FOR INTERNAL USE ONLY, SEE NOTES 11-15, 18 & SHEET 6, FIG 3) = (LENGTH: XXXX) - (SUBTRACTOR FOR END 1) - (SUBTRACTOR FOR END 2). NOT FOR SALE (SEE NOTE 19) (SEE TABLE 1 FOR SUBTRACTORS) (SEE FIG 2) FORMAT: X.X mm C 3. ASSEMBLY TO BE 100% TESTED FOR OPENS & SHORTS. (SEE FIG 2) FORMAT: X.X mm 4. ASSEMBLY TO BE 100% HI-POT TESTED PER TABLE 1, THE TEST VOLTAGE FOR THE ASSEMBLYC (SEE FIG 2) FORMAT: X.X mm SHOULD BE SET TO THE END OPTION WITH THE LOWEST TEST VOLTAGE RATING. 5. AFTER FINAL ELECTRICAL TESTS, LABEL EACH CABLE ASSEMBLY WITH 1 LABEL -ET 6. CRITICALS ON CONNECTOR PRINTS TO BE CHECKED IN PROCESS. DO NOT LEAVE ANY SPACE BLANK, 7. FINISHED ASSEMBLIES TO BE PACKAGED PER PACKAGING STANDARD CO-HD-WI-3040-M. EACH MUST CONTAIN A LOCK WASHERS AND NUTS TO BE SHIPPED UNASSEMBLED. GASKETS TO BE INSTALLED ON CABLE. NUMERIC CHARACTER 0 THRU 9. 8. CABLE STOCKED IN INCHES, 1 INCH = 25.4 MILLIMETERS. 9. CABLE LENGTHS LONGER THAN 1000 MILLIMETERS ARE NOT SUPPORTED BY S.I. TEST DATA. F: DWG MISC MKTG RFXXXX-XXXXX-XXXXXX-XXXX-MKT.SLDDRW 10. MINIMUM BEND RADIUS FOR RF174 = 25.4 1.00 UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE RF316 = 12.7 .50 DIMENSIONS ARE IN THIS DOCUMENT CONTAINS INFORMATION RF316A = 12.7 .50 MILLIMETERS INCHES . CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: 11. FOR SING ENDED OR STRIPPED AND TINNED ASSEMBLIES: MAKE A DOUBLE ENDED SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR ASSEMBLY AT TWICE THE CABLE LENGTH AND TEST BEFORE CUTTING ASSEMBLY IN HALF. DECIMALS ANGLES DISCLOSED TO OTHERS OR USED FOR ANY 12. DIM,, AND HAVE A MINIMUM VALUE OF 0.0mm & A MAXIMUM VALUE OF 9.9mmX: 0.3 .01 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS .XX: 0.13 .005 PHONE: 812-944-6733 FAX: 812-948-5047 13. PRODUCTION OF STRIP AND TIN FOR CENTER DIELECTIC USE: A. OBTAINED WITHOUT THE EXPRESSED WRITTEN .XXX: 0.051 .0020 CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 14. PRODUCTION OF STRIP AND TIN FOR SHIELD USE: D=A+B. MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 15. PRODUCTION OF STRIP AND TIN FOR JACKET USE: E=A+B+C. DESCRIPTION: SEE END 1 AND END 2 ASSEMBLY PRINTS 16. CONNECTORS TO BE ORIENTED ACCORDING TO C0-HD-WI-3048-M. RF316 OR RF-174 CABLE ASSEMBLY 17. FOR BULKHEAD APPLICATIONS, THE END USER SHOULD TIGHTEN THE THREADED NUT TO 15 DWG. NO. IN-LB MINIMUM. 18. FOR STRIPPED AND TINNED OPTION, ONLY THE CENTER CONDUCTOR IS TINNED. RFXXXX-XXXXX-XXXXXX-XXXX 19. USED IN ACRX SERIES. BY: TIM P. 09-10-2010 SHEET OF1 7REVISION AL F: DWG MISC MKTG RFXXXX-XXXXX-XXXXXX-XXXX-MKT.SLDDRW = FOR INTERNAL USE ONLY, NOT FOR SALE (SEE NOTE 19) PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING RF316 OR RF-174 CABLE ASSEMBLY DWG. NO. SHEET SCALE: 1:1 RFXXXX-XXXXX-XXXXXX-XXXX BY: TIM P. 09-10-2010 SHEET OF2 7