NOTES: REVISION DI SFM-1XX-XX-XXX-D-XXX C 1. REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PUSHOUT FORCE: .5 LB. OPTIONS No OF POSITIONS C 3. COPLANARITY: .004 0.10 = POS 05 THRU 26 DO NOT .006 0.15 = POS 27 THRU 50 (LEAVE BLANK FOR STANDARD ALL POSITIONS AVAILABLE SCALE FROM 4. TUBE ALL POSITIONS. PARTS TO BE TUBED WITH AND USE SFM-XX-D) -02 THRU -50 THIS PRINT NOTCH GOING WITH ARROW. -N: NO POLARIZATION NOTCH (USE BODY: SFM-XX-D-XX-X) 5. PINS CAN BE ORIENTED IN ANY DIRECTION (USE SFM-XX-D-XX-N) BOTH ROWS MUST FACE SAME WAY. -A: ALIGNMENT PIN (USE SFM-XX-D-A-X) 6. SEE NOTCH FOR PROPER ORIENTATION. LEAD STYLE (SEE FIG 4, SHT 2) 7. MAXIMUM PIN HEIGHT VARIATION: .003 0.08 . -LC: LOCKING CLIP (SEE FIG 6, SHT 3 & NOTE 8) 8. DUE TO HIGH AMOUNT OF INSERTION FORCE -01: THROUGH HOLE (AVAILABLE ON ALL LEADS) NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH (USE CONTACT: C-44-01-XXX) -P: PICK AND PLACE PAD AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL (SEE FIG 1, SHT 1) PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION. (SEE FIG 5, SHT 2) -02: SURFACE MOUNT (AVAILABLE ON 5 THRU 50 POSITION ONLY) (USE CONTACT: C-44-02-XXX) -TR: TAPE & REEL (SEE SHT 4) (SEE FIG 2, SHT 2) (NOT AVAILABLE WITH -DS OPTION) -03: STRAIGHT MODIFIED -K: POLYIMIDE FILM PAD (.005 0.13 THICKNESS) (USE CONTACT: C-44-03-XXX) (SEE FIG 3, SHT 2) (USE K-DOT-.157-.250-.005) *: DIMENSIONS N/A FOR -N OPTION (SEE FIG 1, SHT 1) -SN: SOLDER NAIL FOR .062 BOARD -L1: THROUGH HOLE (LOW INSERTION) (SFM-XX-D-SN AND WT-27-01-T) (USE CONTACT: C-61-01-XXX) (AVAILABLE WITH LEAD STYLE -02, -L2 & -T2) *.145 3.68 REF (SEE FIG 1, SHT 1) (NOT AVAILABLE WITH -A & -LC) -L2: SURFACE MOUNT (LOW INSERTION) -SN2: SOLDER NAIL FOR .093 BOARD (USE CONTACT: C-61-02-XXX) *.020 0.51 REF (SFM-XX-D-SN AND WT-27-02-T) (SEE FIG 2, SHT 2) (AVAILABLE WITH LEAD STYLE -02, -L2 & -T2) .120 3.05 REF -L3: STRAIGHT MODIFIED (LOW INSERTION) *.080 2.03 REF (NOT AVAILABLE WITH -A & -LC) (USE CONTACT: C-61-03-XXX) .050 1.27 -DS: DUAL SCREW DOWN FOR .062 BOARD (SEE FIG 1, SHT 1) 02 REF (SEE FIG 8, SHT 3) -T1: THROUGH HOLE (PHOS BRONZE) (ONLY AVAILABLE WITH -01, -02 AND -03 LEAD (USE CONTACT: C-119-01-XXX) C STYLE)(NOT AVAILABLE WITH OPTIONS -N, -A, L (SEE FIG 1, SHT 1) -LC, -P, -TR, -K, -SN AND SN2), (USES SFM-XX-D-DS, -T2: SURFACE MOUNT (PHOS BRONZE) CPS-RR-XX-XX-X, ACCRT-01 AND WT-27-XX-T (USE CONTACT: C-119-02-XXX) 01 ALWAYS FILLED) (SEE FIG 2, SHT 2) C L .050 1.27 REF BODY SPECIFICATION -D: DOUBLE ROW (NO. OF POS x .050 1.27 ) + .015 0.38 REF PLATING SPECIFICATION -S: 30 SELECTIVE GOLD IN CONTACT AREA, C SFM-XX-D-LC-X L (NO. OF POS x .050 1.27 ) + .155 3.94 REF MATTE TIN ON TAIL -F: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, C-XX-01-XXX MATTE TIN ON TAIL -H: 30 HEAVY GOLD IN CONTACT AREA, (SEE NOTE 5) 3 GOLD ON TAIL -L: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, .180 4.57 REF MATTE TIN ON TAIL .015 0.38 REF .110 2.79 REF -STL: 30 SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD (90/10+/-5%) TAIL C (ONLY AVAILABLE ON -02 OR -L2 LEADSTYLES) C -SM: 30 SELECTIVE GOLD IN CONTACT AREA, L (SEE TABLE 1) MATTE TIN ON TAIL -FM: 3 FLASH SELECTIVE GOLD IN CONTACT AREA, 2 MAX SWAY (TYP) MATTE TIN ON TAIL REF -LM: 10 LIGHT SELECTIVE GOLD IN CONTACT AREA, .050 1.27 C MATTE TIN ON TAIL .005 0.13 REF (NO. OF POS x .050 1.27 ) - .050 1.27 REF 1 MAX C SWAY (TYP) SECTION FIG 1 UNLESS OTHERWISE SPECIFIED, PROPRIETARY NOTE THROUGH HOLE/STRAIGHT MODIFIED DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO TOLERANCES ARE: SAMTEC, INC. AND SHALL NOT BE REPRODUCED DECIMALS ANGLES OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS .XXX: .005 .13 PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN .XXXX: .0020 .051 CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 3:1 DESCRIPTION: .050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY INSULATOR: LCP UL 94V-O, COLOR: BLACK CONTACT: TIGER EYE: BeCu DWG. NO. TIGER EYE LITE: PHOSPHOR BRONZE SFM-1XX-XX-XXX-D-XXX BY: JORDAN 12/11/89 SHEET OF1 4 F: DWG MISC MKTG SFM-1XX-XX-XXX-D-XXX-MKT.SLDDR REVISION DI (SEE NOTE) C .019.010 0.480.254 (SEE NOTE) (NO. OF POS x .050 1.27 ) - .050 1.27 REF (TOL ACCUM .005 0.13 OVER 50 POS) C C-XX-02-XXX 02 +.005 +0.13 .190 4.83 -.002 -0.05 .1575.0050 4.0000.127 .190 4.83 01 IN-PROCESS 2 MAX SWAY (TYP) -X2 FIG 3 C -K: POLYIMIDE FILM PAD (SAME AS FIG 1, DIFFERENT AS SHOWN) FOR HAND FILL ONLY NOTE: DIMENSION APPLIES PRIOR NOTE: = USED MEASURED DIMENSION REF TO RE-PRESS, SEE SECTIONB- = - .1575 4.000 )/2 .020 0.51 FOR FINISHED DIMENSION SFM-XX-D-LC-X +.002 +0.051 .185 4.70 -.005 -0.127 C 4 (SEE NOTE 7) SEE NOTE 3 SEE NOTE .165 4.19 REF 2 FIG 2 SECTION -X2: SURFACE MOUNT (SAME AS FIG 1, DIFFERENT AS SHOWN) .394 10.01 PPP-02 REF .225 5.72.010 0.25 (SEE TABLE 2) REF (NO. OF POS x .050 1.27 ) + .125 3.18 REF .062 1.57 SFM-XX-D-A-X .050 1.27 FIG 5 REF -P: PICK AND PLACE PAD (PAD TO BE ORIENTED A SHOWN FOR 5-12 POSITION PARTS) (FOR 13-50 POSITION PARTS, PAD MAY BE ORIENTED IN EITHER DIRECTION) .050 1.27 (SAME AS FIG 1, DIFFERENT AS SHOWN) R REF REF PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION (NO. OF POS x .050 1.27 ) + .075 1.91 REF CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PURPOSE OTHER THAN THAT WHICH IT WAS PHONE: 812-944-6733 FAX: 812-948-5047 OBTAINED WITHOUT THE EXPRESSED WRITTEN e-Mail info SAMTEC.com code 55322 CONSENT OF SAMTEC, INC. FIG 4 DESCRIPTION: -A: ALIGNMENT PIN DO NOT SCALE DRAWING .050 x .050 SOCKET STRIP DOUBLE ROW ASSEMBLY (SAME AS FIG 1, DIFFERENT AS SHOWN) DWG. NO. SHEET SCALE: 3:1 SFM-1XX-XX-XXX-D-XXX F: DWG MISC MKTG SFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW BY: JORDAN 12/11/89 SHEET OF2 4